Streszczenie treści zawartej na stronie nr. 1
ATTO FibreBridge
Installation and Operation Manual
ATTO FibreBridge 2370E
ATTO FibreBridge 2390C/R/D
ATTO FibreBridge 2400C/R/D
Streszczenie treści zawartej na stronie nr. 2
ATTO Technology, Inc. 155 CrossPoint Parkway Amherst, New York 14068 USA www.attotech.com Tel (716) 691-1999 Fax (716) 691-9353 Sales support: sls@attotech.com Technical support: Monday -- Friday, 8am-8pm EST techsupp@attotech.com © 2007 ATTO Technology, Inc. All rights reserved. All brand or product names are trademarks of their respective holders. No part of this manual may be reproduced in any form or by any means without the express written permission of ATTO Technology, Inc. 9/2007....
Streszczenie treści zawartej na stronie nr. 3
Contents 1.0 ATTO FibreBridge provides storage options ...............................1 ATTO FibreBridge 2370E features, benefits ATTO FibreBridge 2390C/R/D features, benefits ATTO FibreBridge 2400C/R/D features, benefits 1.1 ATTO FibreBridge 2370E .....................................................3 Board dimensions Cooling and airflow Power Fibre Channel port SCSI ports Management access LED indicators 1.2 ATTO FibreBridge 2390R/D .................................................5 Dimensi
Streszczenie treści zawartej na stronie nr. 4
2.0 Installing the FibreBridge ...............................................................13 Unpack the packing box; verify contents Install the FibreBridge Discover the IP address Internet Explorer setup Begin initial configuration 3.0 Configuring the FibreBridge ..........................................................15 Preliminary steps Port configurations Modify passwords Enhance performance 3.1 Map devices ..........................................................................17
Streszczenie treści zawartej na stronie nr. 5
Appendix D Warranty information ........................................................xix Manufacturer limited warranty
Streszczenie treści zawartej na stronie nr. 6
1.0 ATTO FibreBridge provides storage options ™ The ATTO FibreBridge family of products provides Fibre Channel-to-SCSI bridges as embeddable boards, stand alone enclosures that can be fitted for rack mount integration, or desktop units. Fibre Channel is a serial communications protocols are able to run over Fibre Channel technology designed to transfer large amounts of hardware. data between a variety of hardware systems over All ATTO FibreBridge models can be used in a long distances. It
Streszczenie treści zawartej na stronie nr. 7
ATTO FibreBridge 2390C/R/D features, benefits • SFP FC connector The ATTO FibreBridge 2390C/R/D is a 4-Gigabit • Support for direct connect to F-port fabric Fibre Channel-to-SCSI bridge configured with a switches, full duplex FC data transfers and FC- single 4-Gb Fibre Channel port and dual-stacked AL, PLDA and public look login Ultra320 SCSI buses featuring VHDCI interfaces. • Two independent Ultra320 SCSI buses Designed to integrate industry-leading • Dual-stacked VHDCI SCSI connectors p
Streszczenie treści zawartej na stronie nr. 8
1.1 ATTO FibreBridge 2370E The ATTO FibreBridge 2370E is a 4-Gigabit Fibre Channel to SCSI bridge offering the ability to add 4-Gigabit Fibre Channel connectivity to Ultra320 SCSI devices. The FibreBridge 2370E is available in an Management access embeddable card for easy integration into storage The 10/100 Base T Ethernet port is accessible devices. from the RJ-45 connector to provide local and remote diagnostics, monitoring and management. Default values are appropriate for most applicatio
Streszczenie treści zawartej na stronie nr. 9
LED Header P5 Pins LED Header P6 Pins 2 4 6 8 7 5 3 1 1 3 5 7 8 6 4 2 1 Ready LED Cathode 1 SCSI Port 1 Activity LED Cathode 2VDD 3.3 2VDD 3.3 3 Power OK LED Cathode 3 SCSI Port 2 Activity LED Cathode 4VDD 3.3 4VDD 3.3 5 Fault LED Cathode 5 Fibre Channel Port Speed LED Cathode 6VDD 3.3 6VDD 3.3 7NC 7 Fibre Channel Port Activity LED Cathode 8NC 8VDD 3.3 Exhibit 1.1-1 FibreBridge 2370E board layout 4
Streszczenie treści zawartej na stronie nr. 10
1.2 ATTO FibreBridge 2390R/D The ATTO FibreBridge 2390R/D is a 4-Gigabit Fibre Channel to SCSI bridge offering the ability to add 4-Gigabit Fibre Channel connectivity to Ultra320 SCSI devices. Battery-backed event log SRAM & Real-Time- The FibreBridge 2390R/D is available in an industry- Clock: A rechargeable Lithium ion battery cell holds standard IU form factor for easy integration into racks. the memory in a 512KB SRAM for up to 30 days. The advanced connectivity options make it suitabl
Streszczenie treści zawartej na stronie nr. 11
Manual reset switch that no link is present. A separate blinking yellow LED indicates activity. A manual reset switch reboots the FibreBridge. Fibre Channel port: A lighted green LED indicates To reset the FibreBridge, depress the reset button link; off means no link. A separate green LED for no more than three seconds. indicates activity if it is lit, no activity if it is off. To restore factory defaults, press the reset button SCSI ports: A green LED on each port indicates for more t
Streszczenie treści zawartej na stronie nr. 12
1.3 ATTO FibreBridge 2390C The ATTO FibreBridge 2390C is a 4-Gigabit Fibre Channel to SCSI bridge offering the ability to add 4-Gigabit Fibre Channel connectivity to Ultra320 SCSI storage devices. The FibreBridge 23900C is available in an industry- Fibre Channel port standard 4U cPCI card. Default values are appropriate The 4-Gb Fibre Channel port uses a Small Formfactor for most applications. Refer to Configuring the Pluggable (SFP) interface. FibreBridge on page 15 for more information.
Streszczenie treści zawartej na stronie nr. 13
Embedded in the Ethernet port connector: a A bicolor Ready/Fault LED lights green to indicate lighted green LED shows a valid link; off indicates ready, lights yellow to show a faulted condition, and is that no link is present. A separate blinking yellow LED off to indicate not ready.FibreBridge 2400C bracket indicates activity. detail and board layout Exhibit 1.3-1 The FibreBridge 2390C connectors and LEDS. Exhibit 1.3-2 The FibreBridge 2390C board layout. 8
Streszczenie treści zawartej na stronie nr. 14
1.4 ATTO FibreBridge 2400R/D The ATTO FibreBridge 2400R/D is a high performance bridge adding 4-Gigabit Fibre Channel connectivity to legacy SCSI storage devices. The FibreBridge 2400R/D is available in an industry- WARNING WARNING standard 1U form factor for easy integration into racks. Risk of explosion if the battery is removed Default values are appropriate for most applications. and/or replaced by an incorrect type. Refer to Configuring the FibreBridge on page 15 Dispose of used batt
Streszczenie treści zawartej na stronie nr. 15
Manual reset switch that no link is present. A separate blinking yellow LED indicates activity. A manual reset switch reboots the FibreBridge. Fibre Channel port: A lighted green LED indicates To reset the FibreBridge, depress the reset button for link; off means no link. A separate green LED no more than three seconds. indicates activity if it is lit, no activity if it is off. To restore factory defaults, press the reset button for SCSI ports: A green LED on each port indicates more t
Streszczenie treści zawartej na stronie nr. 16
1.5 ATTO FibreBridge 2400C The ATTO FibreBridge 2400C is a high performance bridge adding 4-Gigabit Fibre Channel connectivity to legacy SCSI storage devices. The FibreBridge 2400C is available in an industry- Fibre Channel port standard 4U cPCI card for easy integration into storage The dual independent 4-Gb Fibre Channel ports can devices. Default values are appropriate for most connect the FibreBridge to either a Fabric or applications. Refer to Configuring the FibreBridge Arbitrated L
Streszczenie treści zawartej na stronie nr. 17
6.299 inches Exhibit 1.5-1 FibreBridge 2400C bracket detail and board layout mounting hole 10-pin serial header Ready/Fault LED Ethernet port FC activity & link LEDs cPCI connector Fibre Channel ports SCSI ports SCSI activity LEDs 6.1939 inches mounting hole cPCI connector 10-pin Power serial connector header power LED mounting hole mounting hole Ethernet FC activity Fibre Ready/ SCSI ports SCSI port & link LEDs Channel Fault LED activity ports LEDs 12
Streszczenie treści zawartej na stronie nr. 18
2.0 Install the FibreBridge If you have not already completed the instructions on the Quick Start page packed with your FibreBridge, use the following instructions to install the FibreBridge. • For the FibreBridge 2390R/D and the Unpack the packing box; verify contents FibreBridge 2400R/D, connect the AC power • The FibreBridge. Note the serial number of your cord from the FibreBridge to the proper AC FibreBridge unit: ________________________ source outlet and turn on the power using the
Streszczenie treści zawartej na stronie nr. 19
If you do not have a DHCP server, get an IP 7 Click on Add address and subnet mask from your network 8 Uncheck the Require server verification administrator, type it into the area provided, and check box. click on Next. 9 Click OK. 5 Click on Launch Browser 10 At the bottom of the Internet Options box, click Your browser points to the ATTO ExpressNAV on OK and close the box. splash screen. If you use Internet Explorer as a browser, continue on to Internet Explorer setup Begin initial c
Streszczenie treści zawartej na stronie nr. 20
3.0 Configure the FibreBridge To configure the ATTO FibreBridge, use ATTO ExpressNAV. Default values are appropriate for most configurations, but may be modified.The ExpressWizard provides one-button setup for many applications. • Keep the automatic settings created when The best way to access the FibreBridge to view you powered up your Fibre Bridge and do and change settings is to use ATTO ExpressNAV, nothing, accepting all the default settings for a browser-based graphical interface. O
