Streszczenie treści zawartej na stronie nr. 1
Quick Installation Guide
TEW -6 40MB
1 .0 1
Streszczenie treści zawartej na stronie nr. 2
Table of Contents English 1 1. Before You Start 1 2. Hardware Installation 2 3. Configure the TEW-640MB 3 4. Wi-Fi Protected Setup (WPS) Push Button Setup 7 Troubleshooting 9 Wireless Tips 12 Version 11.23.2010
Streszczenie treści zawartej na stronie nr. 3
1. Before You Start Package Contents Ÿ TEW-640MB Ÿ CD-ROM (User's Guide) Ÿ Multi-Language Quick Installation Guide Ÿ Power Adapter (12V DC, 0.5A) Ÿ Network Cable (0.6m/2ft.) System Requirements Ÿ A computer with network adapter installed Ÿ Wireless router (e.g. TEW-639GR) or access point (e.g TEW-690AP) ŸAn available DHCP Server –wireless routers usually have a built-in DHCP server Ÿ A media device (e.g. Game Console, Blu-ray player, Internet Ready TV, etc.) with an Ethernet port Ÿ Web Brows
Streszczenie treści zawartej na stronie nr. 4
2. Hardware Installation Note: 1: Wi-Fi Protected Setup (WPS) allows you to quickly connect to your wireless router or access point. If you would like to use WPS push button setup, please go directly to section 4. Wi-Fi Protected Setup (WPS) Push Button Setup. If your wireless router or access point does not support WPS, continue on to section 2 in the Hardware Installation. 2: Do not connect/install the TEW-640MB to your network until instructed to do so. 1. Connect one end of the pr
Streszczenie treści zawartej na stronie nr. 5
3. Configure the TEW-640MB 1. Open your web browser, type http://tew-640mb.trendnet in the Address bar, and then press Enter. 2. Enter the User Name and password and then click OK. Default Settings: User name: admin Password: admin Note: User name and Password are case sensitive. 3. The Wizard will automatically appear. Click Administration Ž Wizard if the Wizard does not automatically appear. 4. Click Next. 5. Select Manual Setup and then click Next. 3
Streszczenie treści zawartej na stronie nr. 6
6. Select DHCP to have the TEW-640MB automatically obtain an IP address from your DHCP server (router). If Static IP address is selected you would need to configure the following: IP address: The assigned IP address should be similar to your network. This IP address should not be used by any other network device on your network. Subnet Mask: In most cases, the default Subnet Mask (255.255.255.0) should be fine. Default Gateway: Enter the IP address of your router for the Default Gatewa
Streszczenie treści zawartej na stronie nr. 7
11. Verify that your settings are correct and then click Apply. 12. Click OK. 13. Wait while your settings are being applied. 14. Click Export Setting (optional). This saves your configuration settings in a file, which can be reloaded when needed. 15. Click Save (optional). 16. Give the file a name, then click Save. 5
Streszczenie treści zawartej na stronie nr. 8
17. Click Exit Wizard. 18. Unplug the power adapter and disconnect the TEW-640MB from your computer. Place the TEW-640MB in your desired location. Please refer to the Wireless Tips section for optimal placement of the TEW-640MB. 19. Plug the power adapter of the TEW-640MB and connect one end of a network cable to one of the TEW-640MB's LAN ports. Connect the other end of the cable to your media device's (e.g. Game Console, Blu-ray player, Internet Ready TV, etc.) network port. Verify
Streszczenie treści zawartej na stronie nr. 9
4. Wi-Fi Protected Setup (WPS) Push Button Setup Note: 1: Wi-Fi Protected Setup (WPS) allows you to quickly connect to your wireless router or access point. 2: Do not connect/install the TEW-640MB to your network until instructed to do so. Make sure your network adapter settings are set to obtain an IP address automatically (see troubleshooting section). 1. Find a location where you would like to place the TEW-640MB. The location must be within the wireless coverage of your router or acc
Streszczenie treści zawartej na stronie nr. 10
6. Connect one end of a network cable to one of the TEW-640MB's LAN ports. Connect the other end of the network cable to your media device's (e.g. Game Console, Blu-ray player, Internet Ready TV, etc.) network port. Verify that the panel lights are on: Power (Blue/Blinking), Network Port (1-4) (Blue/Blinking), and Wireless (Blue/Blinking) 7. Verify that your network media device is connected to your network. If the network setting on your media device is set to obtain an IP address aut
Streszczenie treści zawartej na stronie nr. 11
Troubleshooting 1. I typed http://tew-640mb.trendnet in my Internet Browser's Address Bar, but an error message says “The page cannot be displayed.” How can I get into the TEW-640MB's web configuration page? 1. Check your hardware settings again by following the instructions in section 2. 2. Make sure the Network Port and Wireless lights are lit. 3. Enter http://192.168.10.110 into the browser instead. This is the default IP address of the TEW-640MB. Make sure your network adapter’s TCP
Streszczenie treści zawartej na stronie nr. 12
Windows XP/2000 1. Go into the Control Panel, double-click the Network Connections icon and then right-click the Local Area Connection icon and then click Properties. 2. Click Internet Protocol (TCP/IP) and then click Properties. Then click on Obtain an IP address automatically. 2. My Nintendo does not have an Ethernet port. Can I use this with my Wii? You will need to install a USB to Ethernet adapter on your Wii. The TRENDnet TU2-ET100 version 3.0R is compatible with the Wii. Please
Streszczenie treści zawartej na stronie nr. 13
5. I followed the Quick Installation Guide and setup a new password. When I log in to the browser configuration an access error message appears. What should I do? The default user name and password are both “admin”. When you log in to the browser configuration for the first time, make sure to enter admin for user name. Do not leave the user name field blank. If the password was changed and you don't remember it, you need to reset the TEW-640MB. To reset the TEW-640MB, take a pin or paper
Streszczenie treści zawartej na stronie nr. 14
Wireless Tips The following are some general wireless tips to help minimize the impact of interference within an environment. Assign your network a unique SSID Do not use anything that would be identifying like “Smith Family Network”. Choose something that you would easily identify when searching for available wireless networks. Do not turn off the SSID broadcast The SSID broadcast is intended to be on and turning it off can cause connectivity issues. The preferred method of securing
Streszczenie treści zawartej na stronie nr. 15
3. Building materials can have a large impact on your wireless signal. In an indoor environment, try to position the wireless devices so that the signal passes through less dense material such as dry wall. Dense materials like metal, solid wood, glass or even furniture may block or degrade the signal. 4. Antenna orientation can also have a large impact on your wireless signal. Use the wireless adapter's site survey tool to determine the best antenna orientation for your wireless devices.
Streszczenie treści zawartej na stronie nr. 16
Streszczenie treści zawartej na stronie nr. 17
Streszczenie treści zawartej na stronie nr. 18
Streszczenie treści zawartej na stronie nr. 19
Streszczenie treści zawartej na stronie nr. 20
Copyright ©2010, All Rights Reserved. TRENDnet.
