Instrukcja obsługi LST BC06-1

Streszczenie treści zawartej na stronie nr. 1

Fire Detection Control Panel
BC06-1, BC06-2
• For application in small systems
• Up to 6 detector zones in conventional
technology
• Dif ferentiation between the activation
of automatic detectors and manual call
points on the same detector line
• Evacuation function (NEN 2575)
• T ested to EN 54-2, -4 by VdS
Fire is a permanent threat to life and property. There- ted within LST premises, thus guaranteeing fl exible and
fore, immediate response to a fi re is imperative. The reliable indiv

Streszczenie treści zawartej na stronie nr. 2

Clear Concept The Fire Detection Control Panels BC06-1 and BC06-2 • The Fire Detection Control Panel BC06-2 includes a have been designed for use in small fi re detection sys- 4-digit, non-resettable alarm counter which indicates tems and already in the basic version they provide the the total number of alarms by means of an LC display following features: in the operating fi eld. • A possible breakdown of the central processing board • 4 conventional detector lines permit the connection is

Streszczenie treści zawartej na stronie nr. 3

Permanent Connection A variety of peripheral devices can be connected to the Fire Detection Control Panel Series BC06: • Acoustic and optical signalling devices • Transmitting devices for alarm transmission • Fire controls – and much more. • External protocol printer Evacuation functions In order to comply with different country-specifi c require- ments, the control panel can be equipped with an evacu- ation function for the manual activation of the alarming devices also without fi re alarm (ev

Streszczenie treści zawartej na stronie nr. 4

Specifi cations Mains voltage 230VAC +10/-20%, 47...63Hz Output/nominal voltage typ. 27.6VDC Output current max. 2.2A Output current siren outputs output 1 max. 1A output 2 max. 0.5A (the sum of the currents of the signalling devices that are connected to the two outputs must not exceed 1A!) Own current consumption at 24V typ. 70mA (without optional componentries, line termination 5.6k Ω) typ. 55mA (without optional componentries, line termination 47µF) Line voltage typ. 20V (line termi