Streszczenie treści zawartej na stronie nr. 1
16 ports
10/100Mbps Fats Ethernet Switch
Layer 2
with 1 optional port
100Base-FX Fiber Module
USER’S GUIDE
Streszczenie treści zawartej na stronie nr. 2
Streszczenie treści zawartej na stronie nr. 3
The Atlantis Land logo is a registered trademark of Atlants Land SpA. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject to change without notice. No liability for technical errors and/or omissions. FCC Warning This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interf
Streszczenie treści zawartej na stronie nr. 4
UL Warning a) Elevated Operating Ambient Temperature- If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the manufacturer's maximum rated ambient temperature (Tmra). b) Reduced Air Flow- Installation of the equipment in a rack should be such that the amount of air flow required for
Streszczenie treści zawartej na stronie nr. 5
attention should be given to supply connections other than direct connections to the branch circuit (e.g., use of power strips).
Streszczenie treści zawartej na stronie nr. 6
TABLE OF CONTENTS ABOUT THIS GUIDE............................................................................ 1 PURPOSE.................................................................................................... 1 TERMS/USAGE........................................................................................... 1 INTRODUCTION .................................................................................. 3 FAST ETHERNET TECHNOLOGY ..........................................
Streszczenie treści zawartej na stronie nr. 7
LOGIN ...................................................................................................... 17 MAIN MENU ............................................................................................ 18 CONFIGURING SETUP SETTING................................................................ 19 ONFIGURING YSTEM ETTING C S S ............................................................. 23 CONFIGURING FILE SETTING................................................................
Streszczenie treści zawartej na stronie nr. 8
ABOUT THIS GUIDE Congratulations on your purchase of the 16-Port 10/100Mbps Fast Ethernet Smart Switch. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible package. Purpose This guide discusses how to install your 16-Port 10/100Mbps Fast Ethernet Smart Switch. Terms/Usage In this guide, the term “Switch” (first letter upper case) refers to your 16-Port 10/100Mbps Fast Ethernet Smart switch Switch, and “ ” (first letter lower c
Streszczenie treści zawartej na stronie nr. 9
INTRODUCTION This chapter describes the features of the 16-Port 10/100Mbps Fast Ethernet Smart Switch and some background information about Ethernet/Fast Ethernet and Switching technology. Fast Ethernet Technology The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance networks. A number of high-speed LAN technologies have been proposed to provide greater bandwidth and improve client/server response tim
Streszczenie treści zawartej na stronie nr. 10
the existing investment in hardware, software, and personnel training. Switching Technology Another approach to pushing beyond the limits of Ethernet technology is the development of switching technology. A switch bridges Ethernet packets at the MAC address level of the Ethernet protocol transmitting among connected Ethernet or Fast Ethernet LAN segments. Switching is a cost-effective way of increasing the total network capacity available to users on a local area network. A switch
Streszczenie treści zawartej na stronie nr. 11
networks, but the cost of a router, the setup and maintenance required make routers relatively impractical. Today switches are an ideal solution to most kinds of local area network congestion problems. VLAN (Virtual Local Area Network) A VLAN is a group of end-stations that are not constrained by their physical location and can communicate as if a common broadcast domain, a LAN. The primary utility of using VLAN is to reduce latency and need for routers, using faster switching in
Streszczenie treści zawartej na stronie nr. 12
Features 16×10/100Mbps Auto-negotiation Ethernet ports All ports support auto MDI/MDIX, so there is no need to use cross-over cables or an up-link port Full/half duplex transfer mode for each port Wire speed reception and transmission Store-and-Forward switching scheme capability to support rate adaptation and ensure data integrity Broadcast storm protection Up to 4K unicast addresses entities per device, self- learning, and table aging 256KBytes on-chip packet buffer
Streszczenie treści zawartej na stronie nr. 13
Standard 19” Rack-mount size UNPACKING AND INSTALLATION This chapter provides unpacking and setup information for the Switch. Unpacking Open the shipping cartons of the Switch and carefully unpacks its contents. The carton should contain the following items: One 16-Port 10/100Mbps Fast Ethernet Smart Switch One AC power cord, suitable for your area’s electrical power connections Four rubber feet to be used for shock cushioning Screws and two mounting brackets One console c
Streszczenie treści zawartej na stronie nr. 14
Installation The site where you install the hub stack may greatly affect its performance. When installing, consider the following pointers: Install the Switch in a fairly cool and dry place. See for the acceptable temperature Technical Specifications and humidity operating ranges. Install the Switch in a site free from strong electromagnetic field generators (such as motors), vibration, dust, and direct exposure to sunlight. Leave at least 10cm of space at the front and rear
Streszczenie treści zawartej na stronie nr. 15
FX r 1 Mb s the ne Sma t Switch 16-Po t 10/ 00 p E r t r POWER Link/ACT D X SYSTEM F Rack Mounting The switch can be mounted in an EIA standard-size, 19-inch rack, which can be placed in a wiring closet with other equipment. Attach the mounting brackets at the switch’s front panel (one on each side), and secure them with the provided screws. Figure 1. Combine the Switch with the provided screws Then, use screws provided with the equipment rack to mount each switch in the rack.
Streszczenie treści zawartej na stronie nr. 16
FX 16-Port 10/100Mbps Ethernet Smart Switch POWER Link/ACT S ST F D X Y EM Figure 2. Mount the Switch in the rack Connecting Network Cable The Switch supports 10Mbps Ethernet or 100Mbps Fast Ethernet and it runs both in half and full duplex mode. These ports are Auto-MDI type port. The Switch can auto transform to MDI-II or MDI-X type, so you can just make an easy connection that without worrying if you are using a standard or crossover cable. AC Power The Switch can be used with
Streszczenie treści zawartej na stronie nr. 17
automatically and may be turned on without having any or all LAN segment cables connected. IDENTIFYING EXTERNAL COMPONENTS This chapter describes the front panel, rear panel, and LED indicators of the Switch. Front Panel The figure below shows the front panels of the Switch. Figure 3. Front panel of 16-port 10/100Mbps Fast Ethernet Switch LED Indicator Comprehensive LED indicators display the status of the switch and the network (see the LED Indicators chapter below). 10/100BA
Streszczenie treści zawartej na stronie nr. 18
Console Port An RS-232 DCE console port is set up and managed the switch via a connection to a console terminal or PC using a terminal emulation program. Rear Panel AC Power Connector Figure 4. Rear panel of the Switch AC Power Connector This is a three-pronged connector that supports the power cord. Plug in the female connector of the provided power cord into this connector, and the male into a power outlet. Supported input voltages range from 100~240V AC at 50~60Hz.
Streszczenie treści zawartej na stronie nr. 19
UNDERSTANDING LED INDICATORS The front panel LEDs provides instant status feedback, and help monitor and troubleshoot when needed. 16-Port 10/100Mbps Ethernet Smart Switch FX 1 2 3 4 5 6 7 8 9 10 11 12131415 16 Link/ACT POWER FDX SYSTEM Figure 5. LED indicators of the Switch Power and System LEDs POWER On : When the Power LED lights on, the Switch is receiving power. Off : When the Power turns off or the power cord has improper connection. SYSTEM Blinking : When the CPU is wor
Streszczenie treści zawartej na stronie nr. 20
Ports 1~16 Status LEDs Link/ACT On : When the Link/ACT LED lights on, the respective port is successfully connected to an Ethernet network. Blinking : When the Link/ACT LED is blinking, the port is transmitting or receiving data on the Ethernet network. Off : No link. 100Mbps On : When the 100Mbps LED lights on, the respective port is connected to a 100Mbps Fast Ethernet network. Off : When the respective port is connected to a 10Mbps Ethernet network Fiber Module LEDs FX Lin
