Streszczenie treści zawartej na stronie nr. 1
VGA to HDMI Adapter RCAD-11001 User Manual
Quick Installation Guide Installation Installation Installation Q2. Introduction Set Up LED is flashing and I got no picture on my screen, what happen? Your Resolution (For LED status is blue flashing)
1. Connect the VGA Ans : The VGA Please open “Control panel”, then you select "Appearance and personalization". to HDMI Bridge(Rosewill VGA only end of cable to VGA to HDMI port on the computer/laptop. Adapter) is designed to convert
Equipments need
Streszczenie treści zawartej na stronie nr. 2
VGA to HDMI Adapter RCAD-11001 User Manual Introduction The VGA to HDMI Bridge(Rosewill VGA to HDMI Adapter) is designed to convert video (analog signal) and audio signals from a PC or Laptop to digital HDMI output of wide-ranged HDTV and PC resolutions, up to 1080p. The Rosewill VGA to HDMI Adapter is a plug and play device, automatically sensing the native resolution of the display and converter the computer’s output to digital signal. The device will detect EDID displays and show the exac
Streszczenie treści zawartej na stronie nr. 3
VGA to HDMI Adapter RCAD-11001 User Manual Installation 1. Connect the VGA only end of cable to VGA port on the computer/laptop. 2. Connect the included Audio cable to the audio out port on the computer 3. Connect Pig-Tail end of VGA cable to Rosewill VGA to HDMI Adapter unit. 4. Connect the USB cable to USB port on the computer (for power purpose) 5. Connect the HDMI port to TV or monitor, and other end to Cable to HDMI unit. 6. See picture below for correct installation.
Streszczenie treści zawartej na stronie nr. 4
VGA to HDMI Adapter RCAD-11001 User Manual Please select 1024x768 for first time Congratulation!!! You made it!!! You can enjoy playing any video or movies from your Laptop or PC to your HD TV or monitor. Note **Please note that this converter does not up/down convert the signal. Essentially, the resolution (supported by this device) that passes through the converter is the same resolution that goes out. Any aspect ratio control must be done directly from your HDTV or source. **
Streszczenie treści zawartej na stronie nr. 5
VGA to HDMI Adapter RCAD-11001 User Manual Q2. LED is flashing and I got no picture on my screen, what happen? Ans : Please open “Control panel”, then you select "Appearance and personalization". Then select "Adjust screen resolution". Under resolution, please select 1024X768. Wait for few seconds for HDMI to sync with your PC. LED should be solid all time. Then you will see your screen. If you want to select other resolution, please reference
Streszczenie treści zawartej na stronie nr. 6
VGA to HDMI Adapter RCAD-11001 User Manual Quick Installation Guide Equipments need for installation • TV or monitor (with HDMI port) • Computer or notebook (VGA port is needs on pc or notebook) 2 ○ • Composite Cable 1 ○ VGA(connect to VGA ○ 1 2 HDMI) 3 ○ ○ 2 Audio(to Audio port on Comp.) VGA(to VGA 3 port on Comp. ) ○ USB(to USB port on C 4 omp. ) ○ ○ 4 • HDMI CABLE 5
Streszczenie treści zawartej na stronie nr. 7
VGA to HDMI Adapter RCAD-11001 User Manual Installation Step1 Prepare 1 HDMI cable and take Rosewill VGA to HDMI Adapter out. Connect HDMI cable to your TV or monitor. Step2 Connect the other side of HDMI cable to Rosewill VGA to HDMI Adapter device. Step3 Take out 3-1 composite cable. 3 Composite Cable VGA ○ connects to 3 ○ 3 ○ VGA port on computer or notebook. Step4 4 ○ Composite Cable USB connects to 4 ○ ○ 4 USB port oncomputer or notebook. Step5 2 ○ 2 Compo
Streszczenie treści zawartej na stronie nr. 8
VGA to HDMI Adapter RCAD-11001 User Manual Installation Step6 Other side of 3-1 Composite Cable has one VGA port. Take that VGA connect to 1 ○ 1 ○ Rosewill VGA to HDMI Adapter device. Step7 Check status LED on Rosewill VGA to HDMI Adapter LED Status Description No light No Power Flashing Power go thru Solid HDMI signal sync Step8 Installation finished. Check LED status dark, flashing or solid. (If LED is solid, you are good to use.) (If not, please follow set up procedure next.) If you s
Streszczenie treści zawartej na stronie nr. 9
VGA to HDMI Adapter RCAD-11001 User Manual Set Up Your Resolution (For LED status is blue flashing) Step1 For Win XP or older, on Desktop mouse press right button→Property →Setting then set resolution to 800x600, click “apply”. On Win7, choose Resolution after right click on the desktop. *Note: If you are using desktop computer, your set up is completed. You should be able to see your screen with in 5 seconds. If you want to use other resolution, you can choose now. If
Streszczenie treści zawartej na stronie nr. 10
VGA to HDMI Adapter RCAD-11001 User Manual Step4 Please select project in both screens. (Because some of notebook will not send out VGA signal unless you do so) Step5 1. Signal sending out needs several seconds, please be patient. 2. If still no screen, check connection again. 3. If you see blue solid LED on device, then means your TV doesn’t support current resolution. Step6 If everything is right, then you will see both screens on. Congratulation!!
