Streszczenie treści zawartej na stronie nr. 1
PCA7447FP
PROM Programming Adapter for M38C89EFFP
User's Manual
Rev.1.00
September 1, 2003
REJ10J0253-0100Z
Streszczenie treści zawartej na stronie nr. 2
• R4945 and R4945A are trademarks of Advantest Corporation. Keep safety first in your circuit designs! • Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriat
Streszczenie treści zawartej na stronie nr. 3
Contents Chapter 1. Precautions for Safety ...........................................................................................4 1.1 Safety Symbols and Meanings ..............................................................................4 Chapter 2. Introduction ...........................................................................................................6 2.1 Things to Check When Unpacking .......................................................................6 Chapter 3.
Streszczenie treści zawartej na stronie nr. 4
Chapter 1. Precautions for Safety In both the user's manual and on the product itself, several icons are used to insure proper handling of this product and also to prevent injuries to you or other persons, or damage to your properties. This chapter describes the precautions which should be taken in order to use this product safely and properly. Be sure to read this chapter before using this product. 1.1 Safety Symbols and Meanings If the requirements shown in the "WARNING" sentences are ignored,
Streszczenie treści zawartej na stronie nr. 5
WARNING Warnings for Use Environment: • This equipment is to be used in an environment with a maximum ambient temperature of 35˚C. Care should be taken that this temperature is not exceeded. • Select the proper programming mode of the PROM programmer. CAUTION Cautions to Be Taken for This Product: • Do not disassemble or modify this product. Disassembling or modifying this product can cause damage. Disassembling and modifying the product will void your warranty. • Use caution when handling this
Streszczenie treści zawartej na stronie nr. 6
Chapter 2. Introduction The PCA7447FP is a PROM programming adapter for M38C89EFFP (8-bit MCU). The PCA7447FP is used to write programs into the internal EPROM of MCU with commercially available PROM programmer. This manual mainly explains specifications of PCA7447FP and how to operate it. Figure 2.1 shows the external view of the product and its constituent parts. Figure 2.1 External view of adapter and constituent parts (IC socket: QFP) 2.1 Things to Check When Unpacking This product consists
Streszczenie treści zawartej na stronie nr. 7
Chapter 3. Specifications Table 3.1 lists specifications of the programming adapters. Table 3.1 Specifications 1MHz Operating clock frequency (Supplied by the ceramic oscillator mounted on the adapter) Power supply Supplied from Vcc of the PROM programmer PCA7447FP Board to insert a programmable MCU (Main unit) (IC socket mounted on it) Interface board Board PCA7402B (Connected by two rows of standard-pitch 18-pin connectors configuration (Interface unit) and two rows of standard-pitch 16-pin co
Streszczenie treści zawartej na stronie nr. 8
Chapter 4. How to Write the Program This chapter describes procedures you need to follow when writing the program. For details on how to operate the PROM programmer, refer to the user's manual of the PROM programmer. 4.1 Programming Procedure Follow steps (1) to (7) below to write the program. (1) Read the program into the PROM programmer. (2) Attach the adapter to the IC socket of the PROM programmer. See "4.2 Attaching Adapter to PROM Programmer" (page 9). (3) Insert the MCU into the adapter.
Streszczenie treści zawartej na stronie nr. 9
4.2 Attaching Adapter to PROM Programmer As shown in Figure 4.1, attach the No. 1 pin of the PCA7402E connector (standard-pitch 32-pin pin- header mounted) to the No. 1 pin of the IC socket of the PROM programmer. Be careful when attaching to the PROM programmer because incorrect insertion can cause fatal damage to the MCU. Figure 4.1 Attaching adapter to PROM programmer ( 9 / 18 )
Streszczenie treści zawartej na stronie nr. 10
4.3 Inserting MCU into Adapter As shown in Figure 4.2, insert the MCU into the IC socket with the No. 1 pin of the MCU matched to the No. 1 pin of the IC socket on the PCA7447FP. Be careful when attaching to the PROM programmer because incorrect insertion can cause fatal damage to the MCU. Top view Figure 4.2 Inserting an MCU (IC socket: QFP) ( 10 / 18 )
Streszczenie treści zawartej na stronie nr. 11
4.4 Precautions When Opening and Closing the IC Socket When opening and closing the IC socket, keep the IC socket side above and horizontal. Otherwise the inside of the IC socket may become damaged and cause an electrical insulation failure. Figure 4.3 shows the state of opening and closing the IC socket to insert the MCU. Side view Figure 4.3 Opening and closing the IC socket and inserting MCU 4.5 Caution to Be Taken for This Product Do not touch the connector in the IC socket and the pins on t
Streszczenie treści zawartej na stronie nr. 12
Chapter 5. Recommended PROM Programmers The PROM programmers listed in Table 5.1 are recommended for this product. Using the actual products, we have verified that these PROM programmers can be used to write programs without problem. Nonconformity occurring by using any other PROM programmers can not be supported. For the latest type of PROM programmers, contact the manufacturer to confirm whether it can be used for your product. Table 5.1 Recommended PROM programmers Programming voltage Manufac
Streszczenie treści zawartej na stronie nr. 13
Chapter 6. Memory Maps Figure 6.1 shows memory maps of the MCU and the PROM programmer. 0000 00000 16 16 Unused area 1000 16 Reserved ROM area 107F 16 0107F 16 1080 16 01080 16 Internal memory area Programming area (60K bytes) FFFD 0FFFD 16 16 FFFE 0FFFE 16 16 Reserved ROM area Unused area FFFF 0FFFF 16 16 10000 16 Unused area 1FFFF 16 MCU PROM programmer (M5M27C101 mode) Figure 6.1 Memory maps ( 13 / 18 )
Streszczenie treści zawartej na stronie nr. 14
Chapter 7. Troubleshooting The table below summarizes errors to be checked carefully before you determine them to be a fault. 7.1 Errors That Occur When Writing to PROM 7.1.1 When Newly Purchased Cause Remedy See page Is the adapter attached to the correct position of the PROM 9 programmer? Programming adapter Is the MCU attached to the correct position? 10 Is the area specification set correctly? 11 PROM programmer Is the correct device selected? 12 The IC socket of the PROM programmer may be s
Streszczenie treści zawartej na stronie nr. 15
7.2 MCUs Do Not Function Normally The program operates normally on the emulator, but when the MCU that has normally been written is attached the same program does not function normally. (1) Is the offset address specified correctly when copying data into the PROM programmer? (2) In the emulator, NOPs are often inserted in the area where the program has not been read, therefore the program happens to appear functioning normally even though it may have gone wild. Check your program again. (3) The
Streszczenie treści zawartej na stronie nr. 16
MEMO ( 16 / 18 )
Streszczenie treści zawartej na stronie nr. 17
PCA7447FP User's Manual Rev.1.00 September 1, 2003 REJ10J0253-0100Z COPYRIGHT ©2003 RENESAS TECHNOLOGY CORPORATION AND RENESAS SOLUTIONS CORPORATION ALL RIGHTS RESERVED
Streszczenie treści zawartej na stronie nr. 18
