Streszczenie treści zawartej na stronie nr. 1
USER
MANUAL
MODEL 2300M SERIES
OpticLink Ethernet
Media Converters
(2300M, 2310M,
2311M, & 2312M)
Part# 07M2300M SALES OFFICE
Doc# 077321U Rev. A
(301) 975-1000
Revised 4/14/03
TECHNICAL SUPPORT
(301) 975-1007
An ISO-9001
Certified Company
Streszczenie treści zawartej na stronie nr. 2
CONTENTS 1.0 Warranty Information ................................................................. 3 1.1 Radio and TV Interference............................................................ 3 1.2 CE Notice...................................................................................... 3 1.3 Service.......................................................................................... 4 2.0 General Information............................................................
Streszczenie treści zawartej na stronie nr. 3
1.0 WARRANTY INFORMATION Patton Electronics warrants all Model 2300M Series components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse, or unauthorized modification. If this product fails or does not perform as warranted, your sole recourse shall be repair or replacement as describ
Streszczenie treści zawartej na stronie nr. 4
and the Low Voltage Directive (LVD) of the Union European (EU). A Cer- tificate of Compliance is available by contacting Technical Support. This device is not intended to be connected to the public telephone network. Caution 1.3 SERVICE All warranty and nonwarranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materi- als Authorization number on the outside of the shipping container. This number may be obtained from
Streszczenie treści zawartej na stronie nr. 5
2.0 GENERAL INFORMATION Thank you for your purchase of this Patton Electronics product. It has been thoroughly inspected and tested and is warranted for one year for parts and labor. If you have any questions about this product, please call Patton Electronics Technical Support at (301) 975-1007. 2.1 FEATURES • Cost effective plug and play solution for converting both 10Base-T and 100Base-TX to 10Base-FL, 100Base-FX, and 100Base-SX • Supports 802.3 and 802.3u, 10Base-T, 10Base-FL, 1
Streszczenie treści zawartej na stronie nr. 6
2.2 DESCRIPTION There are four base models in the Patton Model 2300M Series of stan- dards compliant Ethernet Media Converters (see Table 1) that convert and extend the reach of copper Ethernet over multi-mode fiber. Table 1: Model 2300M configurations Twisted-Pair Fiber Model Connector Distance Wavelength Standard Standard 2300M-ST 100Base-TX 100Base-FX ST 2 km 1300nm 2300M-SC 100Base-TX 100Base-FX SC 2 km 1300 nm 2310M-ST 10Base-T 10Base-FL ST 2 km 850nm 2310M-SC 10Base-T 10
Streszczenie treści zawartej na stronie nr. 7
side of the Model 2311M, there must be another 100Base or an auto-sensing 10/100 network device on the other. The Model 2311M is the ideal product for customers who currently have 10Base-T networks and/or equipment and are planning to upgrade to 100Base-TX in the future. The Model 2311 provides a migration path from 10Base-T/10Base-FL to 100Base-TX/100Base-SX, which elimi- nates the need to upgrade and lowers the overall cost of ownership. • The Model 2312M auto-negotiates and convert
Streszczenie treści zawartej na stronie nr. 8
Gaithersburg, Maryland Model 2311M Auto-Negotiating Ethernet Media Converter 10/100Base-T/TX to 10/100Base-FL/SX 3.0 INSTALLATION The following sections describe installing and configuring the Model 2300M Series of Ethernet Media Converters 3.1 INSTALLING A MEDIA CONVERTER Do the following to install the Model 2300M Series of Ethernet Media Converters: 1. The MDI/MDI-X switch enables you to connect the 2300M models to different types of network devices using a standard (straight-
Streszczenie treści zawartej na stronie nr. 9
2. The media converter comes equipped with a shielded RJ-45 Jack for Ethernet connections (see Figure 1 on page 8). Connect the Ethernet RJ-45 jack to the appropriate 802.3 compliant network equipment via a standard network patch cable (not pro- vided). The pinout diagrams in Figure 2 reflect the pinouts of the Ethernet RJ-45 jack when switched to MDI and MDI-X settings. Note Twisted-pair connections from the Ethernet RJ-45 Jack to the network device should be 802.3 compliant (Categ
Streszczenie treści zawartej na stronie nr. 10
PWR FO100 FOACT FO10 TP100 TPACT TP10 3. Connect the dual fiber ST or SC connectors on the media converter (see Figure 3) directly to the 802.3 compliant multi-mode fiber cable equipped with male ST or SC connectors or via 802.3 compliant multi-mode fiber patch cord (not provided) and corresponding ST or SC fiber wall jacks. Note Verify that the cable connecting the TX and RX of the 2300M Series unit is connected to the RX and TX respectively on the remote 2300M Series unit or netwo
Streszczenie treści zawartej na stronie nr. 11
3.2 END-TO-END CONNECTION Figure 4 shows an end-to-end connection between a personal computer/ terminal and Ethernet hub using two Patton Model 2300M Series Ether- net Media Converters and a multi-mode fiber connection. Figure 4. End-to-end multi-mode fiber connection 11
Streszczenie treści zawartej na stronie nr. 12
Gaithersburg, Maryland Model 2311M Auto-Negotiating Ethernet Media Converter 10/100Base-T/TX to 10/100Base-FL/SX 4.0 OPERATION Once you have installed the Model 2300M Series unit and have con- nected the External Power Supply Adapter to the appropriate power source, the unit will power up automatically and is ready to operate. 4.1 LED INDICATORS Once powered up, LED indicators located on the side of the Model 2300M Series unit will illuminate to indicate the operating status of the u
Streszczenie treści zawartej na stronie nr. 13
The LED indicators reflect the following operating status: Table 2: LED indicator descriptions Number Name Description 1 PWR Illuminates green to shown that power is applied to unit. 2 FO100 Illuminates green to show that a 100 Mbps signal is present on the fiber optic side of the unit. (Not used on Model 2310M.) 3 FOACT Blinks yellow to show activity on the fiber optic side of the unit. 4 FO10 Illuminates green to show that a 10 Mbps signal is present on the fiber optic side of the unit.
Streszczenie treści zawartej na stronie nr. 14
APPENDIX A SPECIFICATIONS A.1 INTERFACES/CONNECTORS • Twisted-Pair/Copper Ethernet: Shielded RJ-45 Jack • Fiber Optic Ethernet: Dual ST or SC Connectors A.2 INTERFACE SPEED • 2300M: 100 Mbps • 2310M: 10 Mbps • 2311M: Auto-Negotiating 10 or 100 Mbps • 2312M: Auto-Negotiating 10 or 100 Mbps A.3 TRANSMISSION MODE Full or Half-Duplex Operating Modes (Auto-sensing) A.4 TWISTED-PAIR/COPPER CABLE TYPE* Category 5 or better recommended A.5 FIBER CABLE TYPE* Recommended: 62.5/125
Streszczenie treści zawartej na stronie nr. 15
A.7 FIBER OPTIC LINK BUDGET Transmit power • 2300M: -16.8 dBm (typical) • 2310M: -12 dBm (typical) • 2311M: -12 dBm (typical) • 2312M: -16.8 dBm (typical) Receiver Sensitivity • 2300M: -33.5 dBm (typical) • 2310M: -28 dBm (typical) • 2311M: -28 dBm (typical) • 2312M: -33.5 dBm (typical) Delay Time • 2300M: 5μs per km (typical) • 2310M: 5μs per km (typical) • 2311M: 5μs per km (typical) • 2312M: 5μs per km (typical) Typical Fiber Max. Distance • 2300M—1.24 mile (2 km) • 2310M—1.24
Streszczenie treści zawartej na stronie nr. 16
A.10 COMPLIANCE • Safety & EMC: Patton Internal Safety & EMC Testing, FCC Part 15 Class A • Telecom—CE Mark per EMC directive 89/336/EEC and Low Voltage Directive 73/23/EEC A.11 POWER • External 120 VAC, 60 Hz AC Power Supply (5 VDC output) • External 220 VAC, 50 Hz AC Power Supply (5 VDC output) • External UI AC Power Supply (100–240 VAC, 50–60Hz input, 5 VDC output) • -45 VDC • -24 VDC • -12 VDC A.12 PACKAGED WEIGHT Less than 1 lb. (0.45 kg) with power supply A.13 DIMENSIONS
