Streszczenie treści zawartej na stronie nr. 1
Nokia Bluetooth Stereo
Headset BH-903 User Guide
9205806
Issue 2 EN
Streszczenie treści zawartej na stronie nr. 2
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this HS-72W product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/. © 2007, 2008 Nokia. All rights reserved. Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or
Streszczenie treści zawartej na stronie nr. 3
The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. P
Streszczenie treści zawartej na stronie nr. 4
Co nte n ts Contents 1. Introduction .............................................................. 6 Bluetooth wireless technology............................................................... 7 2. Get started................................................................. 9 Keys and parts............................................................................................. 9 Chargers..................................................................................................... 1
Streszczenie treści zawartej na stronie nr. 5
Co nt ents Switch the call between headset and phone.................................. 25 Call waiting............................................................................................... 25 Clear settings or reset............................................................................ 26 Troubleshooting....................................................................................... 27 4. Menu functions....................................................... 28 Music player .
Streszczenie treści zawartej na stronie nr. 6
Introd uction 1. Introduction With the Nokia Bluetooth Stereo Headset BH-903, you can listen to music and handle calls hands-free on your compatible mobile device. The headset also has a built-in FM radio. You can use the headset with compatible devices that support Bluetooth wireless technology. Read this user guide carefully before using the headset. Also read the user guide for your mobile device. It provides important safety and maintenance information. Check www.nokia.com/support or y
Streszczenie treści zawartej na stronie nr. 7
Intro d uction ■ Bluetooth wireless technology Bluetooth wireless technology allows you to connect compatible devices without <10m cables. A Bluetooth connection does not require that the mobile device and the headset are in line of sight, but the maximum distance between the devices is 10 metres (33 feet). The closer the mobile device and the headset are to each other, the better is the performance. The optimal operating range is shown in dark grey in the picture. The connection is su
Streszczenie treści zawartej na stronie nr. 8
Introd uction with the manufacturers of other devices to determine their compatibility with this device. 8
Streszczenie treści zawartej na stronie nr. 9
G e t starte d 2. Get started ■ Keys and parts 1 4 5 2 6 11 12 7 3 8 8 13 9 10 14 9 The headset contains the following parts: 1. Earphones 9
Streszczenie treści zawartej na stronie nr. 10
Get started 2. Controller with a microphone on the back, a mute key on the side, and an answer/end key on the front. 3. Charger connector 4. Neckstrap 5. Power key 6. Display 7. Rewind key 8. Scroll keys 9. Stop key 10. Menu key 11. Selection key 12. Forward key 13. Play/pause key 14. Answer/end key The symbols for the rewind key, forward key, stop key, play/ pause key, and answer/end key are shown if the keys can be used and the headset is not in the power saving mode or the 10
Streszczenie treści zawartej na stronie nr. 11
G e t starte d keys are not locked. When you press one of these keys, use only one finger. Before you can start using the headset, you must charge the battery and pair the headset with a compatible device. Parts of the headset are magnetic. Metallic materials may be attracted to the headset. Do not place credit cards or other magnetic storage media near the headset, because information stored on them may be erased. ■ Chargers This device is intended for use when supplied with power from th
Streszczenie treści zawartej na stronie nr. 12
Get started ■ Charge the battery Before charging the battery, carefully read “Battery information,” p. 37. 1. Connect the charger to a wall outlet. 2. Connect the charger cable to the charger connector on the headset. When the charging starts, Charging is briefly displayed on the headset. During charging, a battery animation is displayed. It may take a while before charging starts. If charging does not start, disconnect the charger, and plug it in again. Charging the battery fully may
Streszczenie treści zawartej na stronie nr. 13
G e t starte d The fully charged battery has power for up to 11 hours of talk time, up to 150 hours of standby time, up to 11 hours of music playing time, or up to 11 hours of radio playing time. With 20 minutes charging, the battery has power for up to 9 hours of talk time, music playing time, or radio playing time. When battery power is low, the headset beeps every 5 minutes and flashes on the display. Recharge the battery. ■ Switch on or off Switch on To switch on, press and hold the
Streszczenie treści zawartej na stronie nr. 14
Get started If the headset has not been paired with a device, it enters the pairing mode. See “Pair and connect the headset,” p. 14. Switch off To switch off, press and hold the power key until the headset beeps and Switching off is displayed. The headset switches off automatically if it is not connected to a paired device and the headset is not used within about 30 minutes. ■ Pair and connect the headset Pair and connect the headset with a phone If your mobile phone supports the A2DP Bluet
Streszczenie treści zawartej na stronie nr. 15
G e t starte d 2. If the headset has not been previously paired with a device, switch on the headset. The headset automatically enters the pairing mode. If the headset has been previously paired with another device, switch off the headset, and press and hold the power key until a text about pairing is displayed. You can also start pairing using the Pairing function described in “Connections,” p. 34. To cancel pairing, press the selection key. 3. Activate the Bluetooth feature on the phone,
Streszczenie treści zawartej na stronie nr. 16
Get started Pair and connect the headset with a music device If your phone does not support the A2DP Bluetooth profile, you can separately pair the headset with the phone and a music device that supports this profile. If you have paired and connected the headset with your phone, disconnect the headset from it before pairing the headset with a music device. To pair the headset with a music device, follow the instructions in “Pair and connect the headset with a phone,” p. 14. If your music
Streszczenie treści zawartej na stronie nr. 17
G e t starte d Switch off the headset. Press the menu key, and select > Connection and Call connections or Music connections. For details, see “Connections,” p. 34. Disconnect the headset in the Bluetooth menu of your device. You do not need to delete pairing with the headset to disconnect it. Reconnect the headset If the headset loses the connection to a paired device, you can connect the headset manually to the device. Switch on the headset, and do one of the following: Make the
Streszczenie treści zawartej na stronie nr. 18
Get started Press and hold the answer/end key to connect to a device that supports the Hands-Free Bluetooth profile, or press and hold the play/pause key to connect to a device that supports the A2DP Bluetooth profile. You may be able to set your device so that the headset connects to it automatically when the headset is switched on. To do this in a Nokia device, change your paired device settings in the Bluetooth menu. ■ Display When the headset is on but not used for about 10 seconds,
Streszczenie treści zawartej na stronie nr. 19
G e t starte d The following indicators can be shown on the display: The headset is connected to a compatible device and ready for use. The headset is not connected to a compatible device. A call is in progress. A call is active and another call is on hold. You have missed calls. This indicator is not shown in the radio and music player modes. The microphone is muted (during a call). The battery is fully charged. The battery charge is low. The headset keys are locked. The headset is in the ra
Streszczenie treści zawartej na stronie nr. 20
Get started The headset is in the music player mode. 20
