Instrukcja obsługi Omnitron Systems Technology iConverter GX/F

Streszczenie treści zawartej na stronie nr. 1

Using its switch-based architecture, the GX/F can be
GX/F MODEL NUMBER REFERENCE CHARTS iConverter GX/F Dual/Single-Fiber Converters
used as a two-port fiber converter, or using its two
iConverter GX/F Dual Fiber Converters
additional 10/100 Ethernet backplane ports, it can Port 1 - 1000x Port 2 - 100Fx
Connector
®
iConverter GX/F User Manual
Dual Fiber Single Fiber
connect to adjacent modules and accommodate Type
Connector Types (P1/P2)
(Fiber Type / (Fiber Type /
(P1/P2)
Port 1 - 1000X Port 2

Streszczenie treści zawartej na stronie nr. 2

DIP-SWITCH SETTINGS NOTE: Converters in SFD mode must be deployed in pairs. on Port 1. This facilitates the connection to devices that LED INDICATORS do not auto-negotiate properly on their Gigabit fiber port. LED COLOR DESCRIPTION Front Panel DIP-Switch Settings Board-Mounted DIP-Switches Note: In order for Gigabit fiber ports to link up, the Pwr: Yellow On--Power ON linking two devices (ports) must be set to the same Off BPAEN = Backplane “A” Enabled 1 F/O P1 FDX: Green On--Full-Duplex detec