Naszym celem jest zapewnienie Ci jak najszybszego dostępu do treści zawartych w instrukcji obsługi urządzenia National Instruments 5411. Korzystając z podglądu online możesz szybko przejrzeć spis treści i przejść do strony, na której znajdziesz rozwiązanie swojego problemu z National Instruments 5411.
Dla Twojej wygody
Jeżeli przeglądanie instrukcji National Instruments 5411 bezpośrednio na tej stornie nie jest dla Ciebie wygodne, możesz skorzystać z dwóch możliwych rozwiązań:
Przeglądanie pełnoekranowe - Aby wygodnie przeglądać instrukcję (bez pobierania jej na komputer) możesz wykorzystać tryp przeglądania pełnoekranowego. Aby uruchomić przeglądanie instrukcji National Instruments 5411 na pełnym ekranie, użyj przycisku Pełny ekran.
Pobranie na komputer - Możesz również pobrać instrukcję National Instruments 5411 na swój komputer i zachować ją w swoich zbiorach. Jeżeli nie chcesz jednak marnować miejsca na swoim urządzeniu, zawsze możesz pobrać ją w przyszłości z ManualsBase.
National Instruments 5411 Instrukcja obsługi - Online PDF
Wiele osób woli czytać dokumenty nie na ekranie, lecz w wersji drukowanej. Opcja wydruku instrukcji również została przewidziana i możesz z niej skorzystać klikając w link znajdujący się powyżej - Drukuj instrukcję. Nie musisz drukować całej instrukcji National Instruments 5411 a jedynie wybrane strony. Szanuj papier.
Streszczenia
Poniżej znajdziesz zajawki treści znajdujących się na kolejnych stronach instrukcji do National Instruments 5411. Jeżeli chcesz szybko przejrzeć zawartość stron znajdujących się na kolejnych strinach instrukcji, możesz z nich skorzystać.
Internet Support support@natinst.com E-mail: info@natinst.com FTP Site: ftp.natinst.com Web Address: http://www.natinst.com Bulletin Board Support BBS United States: (512) 794-5422 BBS United Kingdom: 01635 551422 BBS France: 01 48 65 15 59 Fax-on-Demand Support (512) 418-1111 Telephone Support (U.S.) Tel: (512) 795-8248 Fax: (512) 794-5678 International Offices Australia 03 9879 5166, Austria 0662 45 79 90 0, Belgium 02 757 00 20, Canada (Ontario) 905 785 0085, Canada (Québec) 514 694 8521, De
Streszczenie treści zawartej na stronie nr. 3
Important Information Warranty The DAQArb 5411 is warranted against defects in materials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation. National Instruments will, at its option, repair or replace equipment that proves to be defective during the warranty period. This warranty includes parts and labor. The media on which you receive National Instruments software are warranted not to fail to execute programming instruct
Streszczenie treści zawartej na stronie nr. 4
Table of Contents About This Manual Organization of This Manual........................................................................................ix Conventions Used in This Manual................................................................................x Customer Communication ............................................................................................x Chapter 1 Introduction About Your DAQArb 5411 ......................................................................
Table of Contents Appendix A Specifications Appendix B Waveform Sampling and Interpolation Appendix C Customer Communication Glossary Index Figures Figure 1-1. The Relationship between the Programming Environment, NI-DAQ, and Your Hardware ...............................................................1-4 Figure 3-1. DAQArb 5411 I/O Connector................................................................3-1 Figure 3-2. Output Levels and Load Termination Using a 50 Ω Output Impedance ...........
Streszczenie treści zawartej na stronie nr. 7
Table of Contents Figure 4-15. Burst Trigger Mode for DDS Mode ...................................................... 4-16 Figure 4-16. Markers as Trigger Outputs................................................................... 4-17 Figure 4-17. Analog Output and SYNC Out Block Diagram .................................... 4-18 Figure 4-18. Waveform, Trigger, and Marker Timings ............................................. 4-19 Figure 4-19. Output Attenuation Chain .............................
Streszczenie treści zawartej na stronie nr. 8
About This Manual The DAQArb 5411 User Manual describes the features, functions, and operation of the DAQArb 5411. The DAQArb 5411 is a high-speed arbitrary waveform generating device with performance comparable to standalone instruments. Organization of This Manual The DAQArb 5411 User Manual is organized as follows: • Chapter 1, Introduction, describes the DAQArb 5411, lists the optional software and optional equipment, and explains how to unpack your DAQArb 5411. • Chapter 2, Installatio
Streszczenie treści zawartej na stronie nr. 9
About This Manual Conventions Used in This Manual The following conventions are used in this manual: < > Angle brackets enclose the name of a key on the keyboard (for example,
Streszczenie treści zawartej na stronie nr. 10
Chapter 1 Introduction This chapter describes the DAQArb 5411, lists the optional software and optional equipment, and explains how to unpack your DAQArb 5411. About Your DAQArb 5411 Thank you for buying a National Instruments DAQArb 5411 device. The DAQArb 5411 family consists of two different devices for your choice of bus: the PCI-5411 for the PCI bus and the AT-5411 for the ISA bus. Your 5411 device has the following features: • One 12-bit resolution analog output channel • Up to 16 MHz
Streszczenie treści zawartej na stronie nr. 11
Chapter 1 Introduction RTSI bus triggers on devices that use the RTSI bus or the digital trigger on the I/O connector. Detailed specifications of the DAQArb 5411 devices are in Appendix A, Specifications. What You Need to Get Started To set up and use your DAQArb 5411, you will need the following: ❑ One of the following DAQArb 5411 devices: – PCI-5411 – AT-5411 ❑ DAQArb 5411 User Manual ❑ NI-DAQ for PC compatibles, version 5.0 or later ❑ One of the following software packages and documentation
Streszczenie treści zawartej na stronie nr. 12
Chapter 1 Introduction Software Programming Choices There are several options to choose from when programming your National Instruments DAQ hardware. You can use LabVIEW, LabWindows/CVI, or VirtualBench. National Instruments Application Software LabVIEW and LabWindows/CVI are innovative program development software packages for data acquisition and control applications. LabVIEW uses graphical programming, whereas LabWindows/CVI enhances traditional programming languages. Both packages inclu
Streszczenie treści zawartej na stronie nr. 13
Chapter 1 Introduction Your DAQArb 5411 kit contains a free copy of VirtualBench-Arb and VirtualBench-Function Generator. VirtualBench-Arb is a turn-key application you can use to generate waveforms as you would with a standard arbitrary waveform generator. NI-DAQ Driver Software The NI-DAQ driver software is included at no charge with all National Instruments DAQ hardware. NI-DAQ is not packaged with accessory products. NI-DAQ has an extensive library of functions that you can call from y
Streszczenie treści zawartej na stronie nr. 14
Chapter 1 Introduction Optional Equipment National Instruments offers a variety of products to use with your DAQArb 5411, including probes, cables, and other accessories, as follows: • Shielded and unshielded I/O connector blocks (SCB-68, TBX-68, CB-68) •RTSI bus cables For more specific information about these products, refer to your National Instruments catalogue or web site, or call the office nearest you. Cabling The following list gives recommended part numbers for cables that you can
Streszczenie treści zawartej na stronie nr. 15
Chapter 1 Introduction Unpacking Your device is shipped in an antistatic package to prevent electrostatic damage to the device. Electrostatic discharge can damage several components on the device. To avoid such damage in handling the device, take the following precautions: • Ground yourself via a grounding strap or by holding a grounded object. • Touch the anti-static package to a metal part of your computer chassis before removing the device from the package. • Remove the device from the p
Streszczenie treści zawartej na stronie nr. 16
Chapter Installation and 2 Configuration This chapter describes how to install and configure your DAQArb 5411. Installation Note: You should install your driver software before installing your hardware. Refer to the DAQArb 5411 Read Me First document for software installation information. If you have an older version of NI-DAQ already in your system, that software will not work with your device. Install NI-DAQ from the NI-DAQ software CD shipped with your DAQArb 5411. You can install the PC
Streszczenie treści zawartej na stronie nr. 17
Chapter 2 Installation and Configuration 8. Replace the cover. 9. Plug in and turn on your computer. The PCI-5411 or AT-5411 is now installed. Hardware Configuration The DAQArb 5411 is a fully software-configurable, Plug and Play device. Configuration information is stored in nonvolatile memory. The Plug and Play services query the device, read the information, and allocate resources for items such as base address, interrupt level, and DMA channel. After assigning these resources, the operat
Chapter 3 Signal Connections ARB Connector The ARB connector provides the waveform output. The maximum output levels on this connector depend on the type of load termination. If the output of a DAQArb 5411 terminates into a 50 Ω load, the output levels are ±5 V, as shown in Figure 3-2. If the output of DAQArb 5411 terminates into a high impedance load (HiZ), the output levels are ±10 V. If the output terminates into any other load, the levels are: R L V = – x 10 V out R + R L O where V is t
Streszczenie treści zawartej na stronie nr. 20
Chapter 3 Signal Connections SYNC Connector The SYNC connector is a transistor-transistor-logic (TTL) version of the sine waveform being generated at the output. You can think of the SYNC output as a very high frequency resolution, software-programmable clock source for many applications. You can also vary the duty cycle of SYNC output on the fly by software control, as shown in Figure 3-3. t is the time period of the sine wave being p generated and t is the pulse width of the SYNC output.
