Streszczenie treści zawartej na stronie nr. 1
5400 Series
User’s Manual
Third Edition, May 2004
Streszczenie treści zawartej na stronie nr. 2
5400 Series User’s Manual The software described in this manual is furnished under a license agreement and may be used only in accordance with the terms of that agreement. Copyright Notice Copyright 2004 Moxa Technologies Co., Ltd. All rights reserved. Reproduction without permission is prohibited. Trademarks MOXA is a registered trademark of Moxa Technologies Co., Ltd. All other trademarks or registered marks in this manual belong to their respective manufacturers.
Streszczenie treści zawartej na stronie nr. 3
Table of Contents Chapter 1 Introduction......................................................................................1-1 Overview ....................................................................................................... 1-2 Package Checklist......................................................................................... 1-2 Product Features........................................................................................... 1-2 Product Specifications.
Streszczenie treści zawartej na stronie nr. 4
Chapter 6 Configuring Windows Administrator .............................................6-1 Overview ....................................................................................................... 6-2 Installing Windows Administrator .................................................................. 6-2 Configuration................................................................................................. 6-4 Broadcast Search ................................................
Streszczenie treści zawartej na stronie nr. 5
1 1 Chapter 1 Introduction Welcome to MOXA NPort 5400 Series of advanced serial device servers that make it easy to network enable your serial devices. NPort 5410 comes with four RS-232 ports, and NPort 5430/5430I provide four RS-422/485 ports. The following topics are covered in this chapter: Overview Package Checklist Product Features Product Specifications Terminology and Acronyms
Streszczenie treści zawartej na stronie nr. 6
Overview NPort 5400 Series serial device servers are designed to make your industrial serial devices Internet ready instantly. The compact size of NPort 5400 device servers makes them the ideal choice for connecting your RS-232 (NPort 5410) or RS-422/485 (NPort 5430/5430I) serial devices—such as PLCs, meters, and sensors—to an IP-based Ethernet LAN, making it possible for your software to access serial devices anywhere over a local LAN or the Internet. NPort 5400 serial device servers en
Streszczenie treści zawartej na stronie nr. 7
Introduction Product Specifications LAN Ethernet 10/100 Mbps, RJ45 Protection Built-in 1.5 KV magnetic isolation NPort 5410 Serial Interface Interface RS-232 No. of Ports 4 Port Type DB9 Male Signals TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND Serial Line Protection 15 KV ESD for all signals 2 KV Isolation for NPort 5430I NPort 5430 Serial Interface Interface RS-422/485 No. of Ports 4 Port Type Terminal Block (5 pins per port) Signals RS-422: Tx+, Tx-, Rx+, Rx-, GND RS-485 (2-w
Streszczenie treści zawartej na stronie nr. 8
Power Requirements Power Input 12 to 48 VDC Power Consumption NPort 5410: 385 mA (at 12V max.) NPort 5430: 380 mA (at 12V max.) NPort 5430I: 600 mA (at 12V max.) Mechanical Material SECC sheet metal (0.8 mm) Dimensions (W × H × D) With mounting kit: 176 × 35.5 × 103 mm (6.93 × 1.4 × 4.06 inch) Without mounting kit: 158 × 33 × 103 mm (6.22 × 1.3 × 4.06 inch) Gross Weight NPort 5410: 0.5 kg (1.10 lb) NPort 5430, NPort 5430I: 0.5 kg (1.10 lb) Installation DIN-Rail, Wall M
Streszczenie treści zawartej na stronie nr. 9
2 2 Chapter 2 Getting Started This chapter includes information about installing NPort 5400 Series. The following topics are covered: Panel Layout Connecting the Hardware Wiring Requirements Connecting the Power Grounding NPort 5400 Connecting to the Network Connecting to a Serial Device LED Indicators
Streszczenie treści zawartej na stronie nr. 10
Panel Layout NPort 5430/5430I NPort 5410 2-2 NPort 5400 Series User’s Manual
Streszczenie treści zawartej na stronie nr. 11
Getting Started Connecting the Hardware This section describes how to connect NPort 5400 to serial devices for first time testing purposes. We cover Wiring Requirements, Connecting the Power, Grounding NPort 5400, Connecting to the Network, and Connecting to a Serial Device. Wiring Requirements Safety First! Be sure to disconnect the power cord before installing and/or wiring your NPort 5400. Wiring Caution! Calculate the maximum possible current in each power wire and common wire.
Streszczenie treści zawartej na stronie nr. 12
Grounding NPort 5400 Grounding and wire routing helps limit the effects of noise due to electromagnetic interference (EMI). Run the ground connection from the ground screw to the grounding surface prior to connecting devices. This product is intended to be mounted to a well-grounded mounting surface such as a metal panel. SG: The Shielded Ground (sometimes called Protected Ground) contact is the left most contact of the 3-pin power terminal block connector when viewed from the ang
Streszczenie treści zawartej na stronie nr. 13
3 3 Chapter 3 Initial IP Address Configuration When setting up your NPort 5410/5430/5340I for the first time, the first thing you should do is configuring the IP address. This chapter introduces the method to configure NPort’s IP address. Select one of the initial IP Address configuration methods to configure NPort’s IP Address. For more details about network settings, see the Network Settings section from Chapter 5, Web Console Configuration. This chapter includes the following sectio
Streszczenie treści zawartej na stronie nr. 14
Initializing NPort’s IP Address 1. Determine whether your NPort needs to use a Static IP or Dynamic IP (either DHCP or BOOTP application). 2. If NPort is used in a Static IP environment, you can use LCM Display, NPort Administration Suite, ARP, Web Console, or Telnet Console to configure the new IP address. 3. If NPort is used in a Dynamic IP environment, you can use LCM Display, NPort Administration suite, Web Console, or Telnet Console to configure NPort to get an IP address dynamicall
Streszczenie treści zawartej na stronie nr. 15
Initial IP Address Configuration There are four push buttons on NPort’s nameplate. Going from left to right, the buttons are: Button Name Action MENU menu activates the main menu, or returns to a lower level scrolls up through a list of items shown on the LCM panel’s second line up cursor scrolls down through a list of items shown on the LCM panel’s second down cursor line SEL select selects the option listed on the LCM panel’s second line The buttons are manipulated in a manner si
Streszczenie treści zawartej na stronie nr. 16
As you use the buttons to operate the LCM display, you will notice that with very few exceptions, moving up one level causes the bottom line of the display to move to the top line of the display. You will also notice that the bottom three options in level 2, and all of the options in level 3 have either a C or D attached. The meaning is as follows: • C = configurable I.e., you are allowed to change the setting of this option • D = display only I.e., the setting for this option is displ
Streszczenie treści zawartej na stronie nr. 17
Initial IP Address Configuration The part of the LCM operation that still requires some explanation is how to edit the configurable options. In fact, you will only encounter two types of configurable options. The first type involves entering numbers, such as IP addresses, Netmasks, etc. In this case, you change the number one digit at a time. The up cursor ( ) is used to decrease the highlighted digit, the down cursor ( ) is used to increase the highlighted digit, and the sel button is
Streszczenie treści zawartej na stronie nr. 18
NPort Administration Suite NPort Administration Suite consists of some useful utility programs that are used to configure and manage your NPorts. See Chapter 5 for details on how to install NPort Administration Suite, and how to use this suite of useful utilities to set up IP addresses and configure your NPort. ARP You can make use of the ARP (Address Resolution Protocol) command to set up an IP address for your NPort. The ARP command tells your computer to associate the NPort’s MAC add
Streszczenie treści zawartej na stronie nr. 19
Initial IP Address Configuration Telnet Console Depending on how your computer and network are configured, you may find it convenient to use network access to set up your NPort’s IP address. This can be done using the Telnet program. 1. From the Windows desktop, click on Start and then select Run. 2. Type telnet 192.168.127.254 (use the correct IP address if different from the default) in the Open text input box, and then click OK. 3. When the Telnet window opens, if you are prompted
Streszczenie treści zawartej na stronie nr. 20
6. Use the Backspace key to erase the current IP address, type in the new IP address, and then press Enter. 7. Press any key to continue… 8. Type m and then press Enter to return to the main menu. 3-8 NPort 5400 Series User’s Manual
