Instrukcja obsługi Hypertec HYNEP60056

Streszczenie treści zawartej na stronie nr. 1

CardBus 56k Modem
HYNEP60056
USER GUIDE
Information in this document is subject to change without notice. All
rights reserved. All brand names are registered trademarks of their
respective companies.

Streszczenie treści zawartej na stronie nr. 2

standards. Records maintained by Hypertec continue to reflect that units being produced under this Declaration of Conformity, within the variation that can be expected due to quantity production and tested on a statistical basis, continue to comply with the applicable technical standards. The CardBus Modem 56k Card complies with Part 68 of the FCC rules.  FCC rules permit this device to be directly connected to the telephone network, using a standardised jack.  Do not use this equipment on

Streszczenie treści zawartej na stronie nr. 3

What to do if interference occurs Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of Subpart B of the FCC Rules. These limits provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate

Streszczenie treści zawartej na stronie nr. 4

Streszczenie treści zawartej na stronie nr. 5

ode C d p ugs o y ype C d us C C d s o , e b g e ccess, d download or fax services using the high speed data/fax modem. The software-upgradeable feature ensures continuous support of future ITU 56K standards as they become available. The Data/Fax Modem is installed as a COM port and runs an extended AT command set, and works with all major Windows Fax/Modem software. You don’t have to change your current communications software. The video-ready interface supplied by the CardBus 56k Modem Card pr

Streszczenie treści zawartej na stronie nr. 6

 Video-ready modem interface (VRM) V.80  Software upgrade to future ITU 56K standards  Supports CCITT V.17, V.29, V.27ter and V.21 ch 2 send and receive fax transmission (Class 1)  Increased modem throughput with V.42bis and MNP Class 5 data compression  Error detection and correction using V.42 LAPM and MNP protocol  Fax/Modem installs as a COM port, runs extended AT command set  Automatic Modem sleep mode for longer PC battery life  Supports Windows 98, Windows 95 and Windows N

Streszczenie treści zawartej na stronie nr. 7

If possible, install the adapter as soon as you remove it from its anti-static bag, without putting it down. If you must put it down, place it on the anti-static bag in which it was packed. Do not place the adapter on any metal surface. Installation Procedures To install the WMPC56 PC Card follow the instructions on the Online User Guide. To do so, install the Online User Guide. 1. Start Windows. 2. Insert the WMPC56 distribution diskette into the PC diskette drive. 3. From the TaskBar cl

Streszczenie treści zawartej na stronie nr. 8

86mA @3.3V (Active), 284 mW 98mA @3.3V (transmit), 324 mW 16mA @3.3V (sleep), 53 mW Operating Temperature: 0-50C Operating Humidity: 0% - 90% non-condensing Certifications: FCC Part 15, Subpart B class B FCC Part 68 CE Various Worldwide PTT’s Data Rates: CCITT V.90 (56,000bps) K56flex (56,000bps) CCITT V.34 (33,600bps) CCITT V.32 terbo (19,200bps) CCITT V.32bis (14,400bps) CCITT V.22bis (2,400/1200 bps) CCITT V.23 (1,200/75bps) CCITT V.21 (300bps) Bell 212A (7,200bps) Bell 103J (0-300bps) Fax Ra

Streszczenie treści zawartej na stronie nr. 9

Runs all popular Windows communication software Connector: RJ-11C, female

Streszczenie treści zawartej na stronie nr. 10

pg g , , , or non-Hypertec modification of the product. Additional components installed by the dealer or end user are not covered by this warranty. Apart from the above, no warranty is expressed or implied, including warranty of merchantability or warranty of fitness for use for a particular purpose. The liability of Hypertec is limited to the repair or replacement of the product with a functionally equivalent or better product. Hypertec is not liable for any accidental, general, special, exempl