Streszczenie treści zawartej na stronie nr. 1
Grandstream Networks, Inc.
HT503
FXS/FXO Port
Analog Telephone Adaptor
HT503 User Manual www.grandstream.com
Firmware Version 1.0.0.6 support@grandstream.com
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS HT503 USER MANUAL WELCOME....................................................................................................................................................... 4 Safety Compliances..................................................................................................................................4 Warranty ........................................................................................................................................
Streszczenie treści zawartej na stronie nr. 3
TABLE OF FIGURES HT503 USER MANUAL FIGURE 1: CONNECTING THE HT503 ............................................................................................................... 5 FIGURE 2: INTERCONNECTION DIAGRAM OF THE HT503 ................................................................................... 6 FIGURE 3: SCREENSHOT OF CONFIGURATION LOG-IN PAGE............................................................................ 19 FIGURE 4: SCREENSHOT OF REBOOTING SCREEN.....
Streszczenie treści zawartej na stronie nr. 4
WELCOME Thank you for purchasing Grandstream’s HT503, the affordable, feature rich, Analog Telephone Adaptor/IAD. The HT503 combines a sleek design with the latest technology to offer more advanced telephony features and significantly better integrated router performance than its predecessor – the HT488. It is the second ATA/IAD in the HandyTone 50x series. The HT503 functions as a true 3-in-1 gateway for PSTN network, analog telephone FXS interface and IP network. It enables remote cal
Streszczenie treści zawartej na stronie nr. 5
INSTALLATION EQUIPMENT PACKAGING The HT503 ATA package contains: • One HT503 Main Case • One Universal Power Adaptor • One Ethernet Cable • One HT503 Vertical Stand CONNECTING YOUR ATA The HT503 Analog Telephone Adaptor is an all-in-one VoIP integrated device designed to be a total solution for networks providing VoIP services. The HT503 VoIP features and functions are available using a regular analog telephone. FIGURE 1: CONNECTING THE HT503 HT503 HT503 Back View Fro
Streszczenie treści zawartej na stronie nr. 6
FIVE EASY STEPS TO INSTALL THE HT503 The HT503 is designed for easy configuration and easy installation. Configure the HT503 following the directions in the Configuration section of this manual. 1. Connect a standard touch-tone analog telephone to the PHONE port. 2. Insert a standard RJ11 telephone cable into the LINE port and connect the other end of the telephone cable to a wall jack. 3. Insert the Ethernet cable into the WAN port of HT503 and connect the other end of the Etherne
Streszczenie treści zawartej na stronie nr. 7
PRODUCT OVERVIEW The HT503 is an affordable, high-quality, integrated IP telephony solution for both the residential customers and the ‘road-warriors’ who need advanced call features between traditional PSTN network and IP network. The HT503 enables IP connectivity for any phone or fax using the FXS port and a web- based GUI for easy configuration and installation. It functions as a true FXO gateway that enables remote call origination and termination from/to PSTN and supports the feature
Streszczenie treści zawartej na stronie nr. 8
HARDWARE SPECIFICATION The table below lists the hardware specification of HT503. TABLE 3: HT503 HARDWARE SPECIFICATION LAN interface 1xRJ45 10/100 Mbps Port WAN interface 1xRJ45 10/100 Mbps Port FXS telephone port 1 x FXS (RJ11) FXO telephone port (PSTN Port) 1x PSTN pass-through and life line port LED Power, WAN, LAN, PHONE, and LINE (Green) Input: 100–240 VAC, 50-60 Hz Universal Switching Output: 12VDC, 0.5A, UL certified Power Adaptor Dimension 25mm x 115mm x 75mm (when l
Streszczenie treści zawartej na stronie nr. 9
BASIC OPERATIONS GET FAMILIAR WITH VOICE PROMPT HT503 has a stored voice prompt menu for quick browsing and simple configuration. Currently, the voice prompt menu is designed for the FXS port only. Dial “***” from the analog phone to enter the voice prompt. TABLE 4: HT503 IVR MENU DEFINITIONS Menu Voice Prompt Options Main Menu “Enter a Menu Option” Press “*” for the next menu option Press “#” to return to the main menu Enter 01-05, 07,12-17,47 or 99 menu options 01 “DHCP Mode”,
Streszczenie treści zawartej na stronie nr. 10
NOTE: • “*” shifts down to the next menu option • “#” returns to the main menu • “9” functions as the ENTER key in many cases to confirm an option • All entered digit sequences have known lengths - 2 digits for menu option and 12 digits for IP address. For IP address, add 0 before the digits if the digits are less than 3 (like 192.168.0.26 should be key in like 192168000026, no dot needed while input). Once all of the digits are collected, the input will be processed. • Key entry can
Streszczenie treści zawartej na stronie nr. 11
EXAMPLES: 1. If the target IP address is 192.168.0.10, the dialing convention is Voice Prompt with option 47, then 192 168 000 010 followed by pressing the “#” key if it is configured as a send key or wait for more than 5 seconds. 2. If the target IP address/port is 192.168.1.20:5062, then the dialing convention would be: Voice Prompt with option 47, then 192168001020*45062 followed by pressing the “#” key if it is configured as a send key or wait for 4 seconds. NOTE: When
Streszczenie treści zawartej na stronie nr. 12
Three situations can follow the transfer: 1. A quick confirmation tone (temporarily using the call waiting indication tone) followed by a dialtone. This indicates the transfer was successful (transferee has received a 200 OK from transfer target). A can either hang up or make another call. 2. A quick busy tone followed by a restored call (on supported platforms only). This means the transferee has received a 4xx response for the INVITE and we will try to recover the call. The busy
Streszczenie treści zawartej na stronie nr. 13
1. A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone. 2. A dials C’s number then # (or wait for 4 seconds). 3. If C answers the call, then A presses FLASH to bring B, C in the conference. 4. If C does not answer the call, A can press FLASH back to talk to B. 5. If A presses FLASH during the conference, C will be dropped out. Note: Party A is the call initiator for both calls with party B and party C. PSTN PASS THROUGH HT503 supports PSTN
Streszczenie treści zawartej na stronie nr. 14
PSTN-TO-VOIP CALLS This function is available using the FXO port. The FXO port functions as a bridge between the Internet and PSTN and enables calls to be passed from the PSTN network to VoIP. The user can make VoIP calls remotely by dialing into the FXO line port on HT503. TO MAKE A PSTN-TO-VOIP CALL: 1. Make an incoming call to the PSTN line on FXO port. The phone will ring for 4 times by default (this setting is configurable on the configuration page). 2. If no one answers the cal
Streszczenie treści zawartej na stronie nr. 15
FORWARD CALLS TO PSTN Any VOIP call may be forwarded to a specified PSTN number if the call is not answered after a pre configured numbers of rings. By default “Number of Rings” parameter has value 4. For example, if the end-user has configured a cell phone number in the field “Forward to PSTN” under BASIC SETTINGS configuration page, all calls will be forwarded to the cell phone number after 4 rings. FORWARD CALLS TO VOIP By default, each incoming PSTN call is received over the FX
Streszczenie treści zawartej na stronie nr. 16
CALL FEATURES TABLE 5: HT503 CALL FEATURE DEFINITIONS Key Call Features *30 Block Caller ID (for all subsequent calls) *31 Send Caller ID (for all subsequent calls) *47 Direct IP Calling. Dial “*47” + “IP address”. No dial tone is played in the middle. Detail see Direct IP Calling section on page 12. *50 Disable Call Waiting (for all subsequent calls) *51 Enable Call Waiting (for all subsequent calls) *67 Block Caller ID (per call). Dial “*67” + ” number ”. No dial tone is played in
Streszczenie treści zawartej na stronie nr. 17
CONFIGURATION GUIDE CONFIGURING HT503 THROUGH VOICE PROMPT DHCP MODE Follow Table 3 with voice menu option 01 to enable HT503 to use DHCP. STATIC IP MODE Follow Table 3 with voice menu option 01 to enable HT503 to use STATIC IP mode, then use option 02, 03, 04 to set up HT503’s IP, Subnet Mask, Gateway respectively. TFTP SERVER ADDRESS Follow Table 3 with voice menu option 06 to configure the IP address of the TFTP server. FIRMWARE SERVER IP ADDRESS Select voice menu option 1
Streszczenie treści zawartej na stronie nr. 18
CONFIGURING HT503 WITH WEB BROWSER HT503 ATA has an embedded Web server that will respond to HTTP GET/POST requests. It also has embedded HTML pages that allow users to configure the HT503 through a Web browser such as Microsoft’s IE, AOL’s Netscape or Mozilla Firefox installed on Windows or Unix OS. (Macintosh OS is not included). Access the Web Configuration Menu The HT503 HTML configuration page can be accessed via LAN or WAN ports. • FROM THE LAN PORT: 1. Directly connect a comput
Streszczenie treści zawartej na stronie nr. 19
FIGURE 3: SCREENSHOT OF CONFIGURATION LOG-IN PAGE The password is case sensitive with maximum length of 25 characters. The factory default password for End User and administrator is “123” and “admin” respectively. Only an administrator can access the “ADVANCED SETTING” configuration page. NOTE: If you can not log into the configuration page by using the default password, please check with the VoIP service provider. It is most likely the VoIP service provider has provisione
Streszczenie treści zawartej na stronie nr. 20
End User Password This contains the password for end user to access the Web Configuration Menu. User can put new password here. This field is case sensitive with maximum of 25 characters Web Port This is the device’s internal HTTP server port. Default is 80. Telnet Server Default is set to YES IP Address • If DHCP mode is enabled, then all the field values for the Static IP mode are not used (even though they are still saved in the Flash memory.) The HT503 will acquire its IP address fr
