Streszczenie treści zawartej na stronie nr. 1
TABLE OF CONTENTS
INTRODUCTION
1
1
2
? 5
SPECIFICATION
2.1. HARDWARE 1
2.2. SOFTWARE 2
2
1
3.3. QUICK REFERENCE FOR JUMPERS & CONNECTORS 2
6
6
7
3.7. SPEAKER CONNECTOR INSTALLATION 8
3.8. HARDWARE RESET SWITCH CONNECTOR INSTALLATION 8
3.9. POWER LED CONNECTOR INSTALLATION 8
1
3- ................. ................................
3- ....................
3- ...................... ................................
3- ............................. ................................ 3.6. CMOS RTC & IS
Streszczenie treści zawartej na stronie nr. 2
8 8 9 BIOS CONFIGURATION 4.1. ENTERING SETUP 4.3. GETTING HELP 4.5. STANDARD CMOS SETUP MENU 4.6. BIOS FEATURES SETUP 4.7. CHIPSET FEATURES SETUP 4.8. POWER MANAGEMENT SETUP 4.9. PNP/PCI CONFIGURATION 4.12. INTEGRATED PERIPHERALS 4.13. SUPERVISOR/USER PASSWORD 4.14. IDE HDD AUTO DETECTION 4.16. EXIT WITHOUT SAVING 2 A-1 ...... ................................ A.1. ATi RAGE PRO DISPLAY DRIVER INSTALLATION APPENDIX A: On-Board Display Driver Installation 4-33 ............... ......................
Streszczenie treści zawartej na stronie nr. 3
3 A-6 ................... ................................ A.2. YAMAHA SOUND DRIVER INSTALLATION 6ZMM
Streszczenie treści zawartej na stronie nr. 4
Streszczenie treści zawartej na stronie nr. 5
1. INTRODUCTION Welcome to use the 6ZMM motherboard. It is a Pentium II / III / Processor based PC / AT compatible system with AGP/ PCI / ISA Bus, and has been designed to be the fastest PC / AT system. There are some new features allow you to operate the system with just the performance you want. This manual also explains how to install the motherboard for operation, and how to set up your CMOS CONFIGURATION with BIOS SETUP program. q Intel Pentium II / III / Processor based PC / AT compa
Streszczenie treści zawartej na stronie nr. 6
q 24.5 cm x 20 cm Micro-ATX form factor, 4 layers PCB. 1.3. PERFORMANCE LIST The following performance data list is the testing results of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software configuration will result in different benchmark testing results.) • Pentium II processor • • • Onboard ATi AGP 3D graphics acceleration chip (8MB • • O.S. Window
Streszczenie treści zawartej na stronie nr. 7
Hi-End 39.1 43.4 ATi RAGE PRO AGP Bus VGA 14.318MHz Clock 14.318MHz 14.318MHz USB Bus I/O CHIPSET Winbond Game Port 24 . 3 1- PS/2 Mouse 576MHz PS/2 Keyboard L-OUT AC-2 Floppy Port YAMAHA L-IN 83977EF MIC LPT Port IDE Ports COM Ports Ultra DMA/33 ISA Bus CHIPSET IDE Bus USB Ports 82371EB 48MHz PIIX4 33MHz PCI Bus Generator 24MHz 100MHz 33MHz 100MHz 33MHz 100MHz DRAM Bus CHIPSET 100MHz 82443ZX PAC SDRAM 100MHz Host Bus DIMM Sockets 3.3V EDO/SDRAM 1.4. BLOCK DIAGRAM 6ZMM
Streszczenie treści zawartej na stronie nr. 8
â 1.5. INTRODUCE THE Pentium II / III Processors Figure 2:OEM Pentium II Processor 4 1- Figure 1:Universal Retention Mechanism & attach Mount Introduction
Streszczenie treści zawartej na stronie nr. 9
Figure 3: OEM Pentium III Processor ? The Accelerated Graphics Port (AGP) is a new port on the Host-To-PCI bridge device that supports an AGP port. The main purpose of the AGP port is to provide fast access to system memory. The AGP port can be used either as fast PCI port (32-bits at 66MHz vs. 32- bits at 33MHz) or as an AGP port which supports 2x data-rate, a read queue, and side band addressing. When the 2x-data rate is used, the port can – addressing can be used to transmit the data addres
Streszczenie treści zawartej na stronie nr. 10
Streszczenie treści zawartej na stronie nr. 11
2. • CPU - Pentium II / III / – 650 - 242 pins 66/100 MHz slot1 on board. • - - - - • - 2 banks 168 pins DIMM module sockets on board. - Use 8 / 16 / 32 / 64 / 128 / 256 MB DIMM module - - - 32 KB 1st cache memory included in CPU. • - - • I/O BUS SLOTS - - 1 8MHz 16 bits ISA BUS. - • IDE PORTS board.(Using IRQ14,15) - – ROM. - Supports 2 16550 COM ports. • I/O PORTS - Supports 1 LPT port. - Supports 1 Floppy port. - Supports 2 USB ports. - - Supports 1 PS/2 Keyboard. 1 2- Supports 1 PS/2 Mou
Streszczenie treści zawartej na stronie nr. 12
- • - - 1x Micro in - 1x Game Port - - 1x VGA Port. • - Suspend mode support. • GREEN FUNCTION - - IDE & Display power down support. - Monitor all IRQ / DMA / Display / I/O events. - 2M bits FLASH ROM. • - Supports Plug & Play, DMI Function. - Micro ATX Form Factor, 4 layers PCB. • • - Bus Master IDE Driver. - INTEL Patch_95 Driver. - - ATi 3D RAGE PRO Driver. - SIV Driver. • BIOS - Licensed AWARD BIOS. - Setup, Hard Disk Utility included. • O.S. - Operation with MS-DOS , Windows 95, Windo
Streszczenie treści zawartej na stronie nr. 13
3 2- Specification
Streszczenie treści zawartej na stronie nr. 14
Streszczenie treści zawartej na stronie nr. 15
3. mainboard package should contain the following: • 6ZMM mainboard . • The Retention Mechanism & Attach Mount or Universal Retention Mechanism & Attach Mount • mainboard. • Cable(Optional)]. • CD or diskette for ¡ B and ATi VGA Utility. The mainboard contains sensitive electric components, which can be easily damaged by static electricity, so the mainboard should be left in its original packing until it is installed. Unpacking and installation should be done on a grounded anti-static mat. The
Streszczenie treści zawartej na stronie nr. 16
USB CPU PWR CN6 INTEL 443ZX 3D RAGE PRO SW2 6ZMM SW1 BIOS Buzzer Floppy IR × Figure 3.1 Ø t I/O Ports Connector USB port. For Primary IDE port. For Secondary IDE port. For Floppy port For Serial port2 (COM B).[Support External Modem Ring On.] For Serial port1 (COM A).[Support External Modem Ring On.] For LPT port. For VGA port. For GAME port. ,LINE-IN,LINE-OUT port. For Internal Modem Ring Power ON port. t Slot 1 For Pentium II / III / t Pin No. Function 1 GND. 2 3- CPU FAN : CPU cooling F
Streszczenie treści zawartej na stronie nr. 17
2 3 t Pin No. Function 1 GND. 2 3 t Pin No. Function 1 GND. 2 3 t JP7 : Wake on Pin No. Function 1 2 3 Signal t IR : INFRARED Connector (IR) --(Optional) Pin No. Function 1 IR Data Output 2 3 IR Data Input 4 Signal 5 POWER (+) t JP8 : Onboard VGA Interrupt Function Selection Pin No. Function Onboard VGA Interrupt Function Disabled (Default). Onboard VGA Interrupt Function Enabled. t JP12 : Onboard VGA Function Selection Pin No. Function Onboard VGA Function Disabled. Onboard VGA Function En
Streszczenie treści zawartej na stronie nr. 18
t JP9 : Onboard Sound Function Selection Pin No. Function Onboard Sound Function Enabled(Default). Onboard Sound Function Disabled. t Pin No. Function t Pin No. Function Normal operation (Default). t JP13: Suspend To RAM Function (Optional). Pin No. Function Normal operation (Default). t JP11: Pin No. Function For 100MHz Normal (Default). t J11: RING PWR ON Pin No. Function 1 Signal 2 4 3- GND 2-3 Close For 100MHz Turbo and other frequencies 1-2 Close System Acceleration Enabled Suspend To
Streszczenie treści zawartej na stronie nr. 19
JP6 : For 2X11 PWR - P - GN GD 1 1 JP6 1 1 Soft PWR: Soft Power Connector Open: Normal Operation Short: Power On/Off Open: Normal Operation P+P - P - : Power LED PIN 1 : anode (+) 1 - ) - ) PIN 1 : VCC (+) - 1 + PIN 2 : VCC PIN 3 : Data PIN 4 : Data ( -) PIN 1 : VCC (+) 1 + - 5 3- SPKR : Internal Speaker Connector (Default) SPKR: Speaker Connector PIN 3 : cathode ( PIN 2 : cathode ( Short: For Hardware Reset System RES: Reset Switch RES S P K R HD P+P PINs Jumper Hardware Installation
Streszczenie treści zawartej na stronie nr. 20
PIN 2-PIN3 : Short PIN 4 : Data ( - ) 1 - ) GN: Green Function Switch Open : Normal operation GD: Green LED - ) 1 mainboard can be installed with 8 / 16 / 32 / 64 / 128 / 256 MB 168 pins DIMM module DRAM, and the DRAM speed must be 67~100 MHz for SDRAM. The DRAM memory system on mainboard consists of bank 0 , bank 1. Since 168 pins DIMM module is 64 bits width, using 1 PCS which can match a 64 bits system. The total memory size is 8MB ~ 256MB SDRAM. The DRAM installation position refer to Figure
