Instrukcja obsługi Altinex 8-out Video/Sync Output Cards VM2146UX

Streszczenie treści zawartej na stronie nr. 1

V-MATIRX
MANUAL PART NUMBER: 400-0173-003
VM2144VS/VM2145SS/VM2146UX
8-OUT VIDEO/SYNC OUTPUT CARDS FOR
TM
V-MATRIX WITH COVER PLATE
USER’S GUIDE

Streszczenie treści zawartej na stronie nr. 2

V-MATRIX TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS .............. 2 GENERAL ......................................................... 2 INSTALLATION................................................. 2 CLEANING ........................................................ 2 FCC / CE NOTICE............................................. 2 ABOUT YOUR V-MATRIX™ VIDEO/SYNC OUTPUT CARDS ..............................................

Streszczenie treści zawartej na stronie nr. 3

V-MATRIX reasonable protection against harmful PRECAUTIONS / SAFETY WARNINGS 1 interference when the equipment is operated in a commercial environment. This equipment Please read this manual carefully before using your generates, uses, and can radiate radio VM2144VS/VM2145SS/VM2146UX. Keep this frequency energy and, if not installed and used manual handy for future reference. These safety in accordance with the instruction manual

Streszczenie treści zawartej na stronie nr. 4

V-MATRIX ABOUT YOUR V-MATRIX™ VIDEO/SYNC TECHNICAL SPECIFICATIONS 3 OUTPUT CARDS 2 FEATURES/ VM2144VS/VM2145SS/ DESCRIPTION VM2146UX VM2144VS/VM2145SS/VM2146UX Output 8-out V-MATRIX™ Video/Sync Output Cards Impedance 75 Ohms, 1% The VM2144VS/VM2145SS/VM2146UX are 8- Return Loss 40dB @ 10MHz output Cards designed for use in a V-Matrix™ DC on Outputs +/-30mV (max) enclosure and can handle a wide array of signal Equalization +3dB @

Streszczenie treści zawartej na stronie nr. 5

V-MATRIX PRODUCT DESCRIPTION 4 APPLICATION DIAGRAM 5 Application 1: Diagram for Video Signal Note that cards are shown with cover plate attached. 4

Streszczenie treści zawartej na stronie nr. 6

V-MATRIX Application 2: Diagram for Sync Signal 5

Streszczenie treści zawartej na stronie nr. 7

V-MATRIX Application 3: Setting Jumpers for Sync - Positive Polarity (VM2145SS) Note: In the diagram above, the jumpers are set for positive polarity on the following ports: P7, P4, P6, P5, P13, P12, P15, and P14. For positive polarity, set jumper on the top pin and middle pin (pins are the dark circles). The jumpers are the dark rectangles on the right side of the diagram next to the bold port numbers. 6

Streszczenie treści zawartej na stronie nr. 8

V-MATRIX Application 4: Setting Jumpers for Sync-Negative Polarity (VM2145SS) Note: In the diagram above, the jumpers are set for negative polarity on the following ports: P7, P4, P6, P5, P13, P12, P15, and P14. For negative polarity, set jumper on the bottom and middle pins (pins are dark circles). The jumpers are the dark areas on the right side of the diagram next to the bold port numbers. 7

Streszczenie treści zawartej na stronie nr. 9

V-MATRIX Application 5: Setting Jumpers for Video (VM2146UX) Note: In the diagram above, the jumpers are set for video on the following ports: P8, P9, P11, P10, P16, P17, P18 and P19. For video, set jumper on the top pin and middle pin (pins are dark circles). The jumpers are the dark rectangles on the left side of the diagram next to the bold port numbers. 8

Streszczenie treści zawartej na stronie nr. 10

V-MATRIX Application 6: Setting Jumpers for Sync-Positive Polarity (VM2146UX) Note: In the diagram above, the jumpers are set for positive sync polarity on the following ports: P8, P9, P11, P10, P16, P17, P18, P19, P7, P4, P6, P5, P13, P12, P15, and P14. For sync, set the jumpers on the left to the bottom pin and middle pin. For positive sync polarity, set jumpers on the right to the top pin and middle pin (pins are the dark circ

Streszczenie treści zawartej na stronie nr. 11

V-MATRIX Application 7: Setting Jumpers for Sync-Negative Polarity (VM2146UX) Note: In the diagram above, the jumpers are set for negative sync polarity on the following ports: P8, P9, P11, P10, P16, P17, P18, P19, P7, P4, P6, P5, P13, P12, P15, and P14. For sync, set the jumpers on the left to the bottom pin and middle pin. For negative sync polarity, set jumpers on the right to the bottom pin and middle pin (pins are the dark c

Streszczenie treści zawartej na stronie nr. 12

V-MATRIX OPERATION 7 INSTALLING YOUR V-MATRIX™ VIDEO/SYNC OUTPUT CARDS 6 The VM2144VS/ VM2145SS/ VM2146UX will operate successfully as long as the card is installed Step 1. Slide the VM2144VS/ VM2145SS/ properly and other technical specifications are VM2146UX and the VM2143VS into followed. available slots in the V-Matrix™ Enclosure. Make sure that the cards fit TROUBLESHOOTING GUIDE 8 into place. Secure the card to the V- We ha

Streszczenie treści zawartej na stronie nr. 13

V-MATRIX (Return Material Authorization). Products returned ALTINEX POLICY 9 without an RMA number may experience a delay in 9.1 LIMITED WARRANTY service. The service charges will be quoted to you before the actual repairs are done. ALTINEX warrants that its products and cables are free from defects in materials under normal use and 9.3 CONTACT INFORMATION service. This warranty is limited to repairing at ALTINEX, INC. company’s