Streszczenie treści zawartej na stronie nr. 1
ADTRAN OPERATING SYSTEM (AOS)
Command Reference Guide
AOS Version 11.1
NetVanta 5000 Series Products
November 2005
61200990L1-35E
Streszczenie treści zawartej na stronie nr. 2
Command Reference Guide Trademarks Any brand names and product names included in this manual are trademarks, registered trademarks, service marks, or trade names of their respective holders. To the Holder of this Manual The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change the contents without prior notice. In no event will ADTRAN be liable for any special, incidental, or consequential damages or for commercial losses even if ADTRAN has bee
Streszczenie treści zawartej na stronie nr. 3
Command Reference Guide Warranty and Customer Service ADTRAN will repair and return this product within the warranty period if it does not meet its published specifications or fails while in service. Warranty information can be found at www.adtran.com. (Click on Warranty and Repair Information under Support.) Product Registration Registering your product helps ensure complete customer satisfaction. Please take time to register your products on line at www.adtran.com. Click Service/Support and
Streszczenie treści zawartej na stronie nr. 4
Command Reference Guide Pre-Sales Inquiries and Applications Support Your reseller should serve as the first point of contact for support. If additional pre-sales support is needed, the ADTRAN Support website provides a variety of support services such as a searchable knowledge base, latest product documentation, application briefs, case studies, and a link to submit a question to an Applications Engineer. All of this, and more, is available at: http://support.adtran.com When needed, further
Streszczenie treści zawartej na stronie nr. 5
Command Reference Guide Training The Enterprise Network (EN) Technical Training Department offers training on our most popular products. These courses include overviews on product features and functions while covering applications of ADTRAN's product lines. ADTRAN provides a variety of training options, including customized training and courses taught at our facilities or at your site. For more information about training, please contact your Territory Manager or the Enterprise Training Coord
Streszczenie treści zawartej na stronie nr. 6
Command Reference Guide Table of Contents Table of Contents Basic Mode Command Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Common Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Enable Mode Command Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Global Configuration Mode Command Se
Streszczenie treści zawartej na stronie nr. 7
Command Reference Guide Table of Contents TACACS+ Group Configuration Command Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1191 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1193 61200990L1-35E Copyright © 2005 ADTRAN 7
Streszczenie treści zawartej na stronie nr. 8
Command Reference Guide CLI Introduction REFERENCE GUIDE INTRODUCTION This manual provides information about the commands that are available with all of the NetVanta Series units. This manual provides information about the commands that are available with NetVanta 5000 Series units. For a list of all of the commands available through the CLI, see 61950860L1-35L (All Products). If you are new to the ADTRAN Operating System’s (AOS) Command Line Interface (CLI), take a few moments to review the
Streszczenie treści zawartej na stronie nr. 9
Command Reference Guide Understanding Command Security Levels Understanding Command Security Levels The ADTRAN CLI has two command security levels — Basic and Enable. Both levels support a specific set of commands. For example, all interface configuration commands are accessible only through the Enable security level. The following table contains a brief description of each level. Level Access by... Prompt With this level you can... Basic beginning an AOS session. > • display system informatio
Streszczenie treści zawartej na stronie nr. 10
Command Reference Guide Using CLI Shortcuts Mode Access by... Sample Prompt With this mode you can... Line specifying a line (console or Telnet) (config-con0)# • configure the while at the Global Configuration mode console terminal prompt. settings (datarate, For example: login password, etc.) >enable • create Telnet logins #config term and specify their (config)#line console 0 parameters (login password, etc.) Router entering router rip or router ospf (config-rip)# • configure RIP or w
Streszczenie treści zawartej na stronie nr. 11
Command Reference Guide Using CLI Shortcuts Shortcut Description ? The ADTRAN CLI contains help to guide you through the configuration process. Using the question mark, do any of the following: • Display a list of all subcommands in the current mode. For example: (config-t1 1/1)#coding ? ami - Alternate Mark Inversion b8zs - Bipolar Eight Zero Substitution • Display a list of available commands beginning with certain letter(s). For example: (config)#ip d? default-gateway dhcp-server domain-lo
Streszczenie treści zawartej na stronie nr. 12
Command Reference Guide Performing Common CLI Functions Performing Common CLI Functions The following table contains descriptions of common CLI commands. Command Description do The do command provides a way to execute commands in other command sets without taking the time to exit the current and enter the desired one. The following example shows the do command used to view the Frame Relay interface configuration while currently in the T1 interface command set: (config)#interface t1 1/1 (con
Streszczenie treści zawartej na stronie nr. 13
Command Reference Guide Understanding CLI Error Messages Understanding CLI Error Messages The following table lists and defines some of the more common error messages given in the CLI. Message Helpful Hints %Ambiguous command The command may not be valid in the current command mode, or you may %Unrecognized Command not have entered enough correct characters for the command to be recognized. Try using the ? command to determine your error. See Using CLI Shortcuts on page 10 for more informati
Streszczenie treści zawartej na stronie nr. 14
Command Reference Guide Command Descriptions COMMAND DESCRIPTIONS This portion of the guide provides a detailed listing of all available commands for the ADTRAN OS CLI (organized by command set). Each command listing contains pertinent information including the default value, a description of all sub-command parameters, functional notes for using the command, and a brief technology review. To search for a particular command alphabetically, use the Index at the end of this document. To search
Streszczenie treści zawartej na stronie nr. 15
Command Reference Guide Command Descriptions BGP Neighbor Configuration Command Set on page 1095 Community List Command Set on page 1111 Router (OSPF) Configuration Command Set on page 1114 Router (PIM Sparse) Configuration Command Set on page 1129 Router (RIP) Configuration Command Set on page 1134 Security and Services Command Sets DHCP Pool Command Set on page 1145 Quality of Service (QoS) Map Commands on page 1163 Radius Group Command Set on page 1169 Route Map Command Set on page 1171 TACAC
Streszczenie treści zawartej na stronie nr. 16
Command Reference Guide Basic Mode Command Set BASIC MODE COMMAND SET To activate the Basic mode, simply log in to the unit. After connecting the unit to a VT100 terminal (or terminal emulator) and activating a terminal session, the following prompt displays: > The following command is common to multiple command sets and is covered in a centralized section of this guide. For more information, refer to the section listed below: exit on page 34 All other commands for this command set are descri
Streszczenie treści zawartej na stronie nr. 17
Command Reference Guide Basic Mode Command Set enable Use the enable command (at the Basic Command mode prompt) to enter the Enable Command mode. Use the disable command to exit the Enable Command mode. Refer to Enable Mode Command Set on page 36 for more information. Syntax Description No subcommands. Default Values No default value necessary for this command. Applicable Platforms This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900 Series u
Streszczenie treści zawartej na stronie nr. 18
Command Reference Guide Basic Mode Command Set logout Use the logout command to terminate the current session and return to the login screen. Syntax Description No subcommands. Default Values No defaults necessary for this command. Applicable Platforms This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900 Series units. Command History Release 1.1 Command was introduced. Usage Examples The following example shows the logout command being execut
Streszczenie treści zawartej na stronie nr. 19
Command Reference Guide Basic Mode Command Set ping
Use the ping command (at the Basic Command mode prompt) to verify Internet Protocol (IP) network connectivity. Syntax Description Specifies the IP address of the system to ping. Entering the ping command with no specified address prompts the user with parameters for a more detailed ping configuration. Refer to Functional Notes (below) for more information. Default Values No default value necessary for this command. Applic
Streszczenie treści zawartej na stronie nr. 20
Command Reference Guide Basic Mode Command Set The following is a list of available extended ping fields with descriptions: Target IP address Specifies the IP address of the system to ping. Repeat Count Specifies the number of ping packets to send to the system (valid range: 1 to 1,000,000). Datagram Size Specifies the size (in bytes) of the ping packet (valid range: 1 to 1448). Timeout in Seconds Specifies the timeout period after which a ping is considered unsuccessful (valid range: 1 to 5 s
