Instrukcja obsługi ADTRAN Dial Backup Interface Module 1204006L2

Streszczenie treści zawartej na stronie nr. 1

For more detailed documentation, visit us online at www.adtran.com.
®
NetVanta ISDN BRI Dial Backup Interface Module (DIM) P/N 1200865L1
Quick Start Guide
INSTALLATION INSTRUCTIONS
1. Remove power from the base unit.
LAN
CONSOLE
2. If the Network Interface Module (NIM) is already in the NetVanta
SLOT 1 NET/D BU chassis, remove all cables from the module and release the pins at
both edges of the NIM faceplate and slide the module out of the
chassis.
3. Carefully align the P1 connector on the N

Streszczenie treści zawartej na stronie nr. 2

For more detailed documentation, visit us online at www.adtran.com. ® NetVanta ISDN BRI Dial Backup Interface Module (DIM) P/N 1200865L1 Quick Start Guide ISDN BRI DIM COMMANDS alias <“text”> caller-id override [always | if-no-CID ] Populates the ifAlias OID (Interface Table MIB of RFC2863) for all physical and virtual Configures the unit to replace caller ID information with a user-specified number. Use interfaces when using SNMP management station. the no form of this command