Streszczenie treści zawartej na stronie nr. 1
ISDN TA PCI Card
From Quick Setup
to
Internet Access
Streszczenie treści zawartej na stronie nr. 2
Class B CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures
Streszczenie treści zawartej na stronie nr. 3
Quick Installation for Windows 98/ME/2000/XP VCOMM (PPP) -- Basic Internet Precautions: 1. This quick installation guide aims at helping you to setup the ISDN TA PCI Card and go to the Inter- net in VCOMM mode with ease and efficiency. For NDIS and CAPI modes, refer to the user manual for details. 2. Before you proceed the following steps, make sure no old driver suites exist in your computer. Unin- stall any old driver suites that already exist, for these could hamper your computer
Streszczenie treści zawartej na stronie nr. 4
9. To verify whether the Network device exists in your computer and is enabled, go to My Com- puter Control Panel System. Click the Device Manager tab. If the Intelligent PCI ISDN TA (ISDN) device, Modems, Multifunction adapters and Net- work adapters are found, it means that your Network device is well installed and enabled. If not, consult your computer dealer for technical support. Installing the Applications 1. Go to My Computer. 2. Select the drive whichever contains the dev
Streszczenie treści zawartej na stronie nr. 5
using compact disc, select the CD-ROM drive and dou- ble-click on folder PCI\WIN98ME when in Windows 98/ME, or PCI\WIN2KXP for Windows 2000/XP. 3. Double-click Setup.exe. Follow the on-screen instruc- tions to proceed. Windows 2000/XP Uninstall Removing the Device Driver 1. Go to My Computer Control Panel System. 2. From the System window, click the Hardware tab. 3. From the Hardware tab, double click the Device Man- ager button. 4. From the Device Manager window, click Multifunc-
Streszczenie treści zawartej na stronie nr. 6
Removing the Applications 1. Go to My Computer Control Panel. 2. From the Control Panel window, double click the Add/Remove Programs icon. 3. Choose Configuration Utility for Windows 2000. Click Change/Remove button and click OK. The ap- plications for this device will be removed automatically. 4. Remove the ISDN TA PCI Card from your computer. Making a New Connection 1. Go to My Computer. 2. Select Dial-Up Networking. Double-click Make a New Connection, a dialog box will appea
Streszczenie treści zawartej na stronie nr. 7
6. From the Dial-Up Networking window right-click your newly created connection. Select Properties. On the General tab, cancel the selection of “Use area code and Dialing Properties” and click OK. 7. From the Start menu, select Programs. Select Con- figuration Utility. Click Config. A dialog box will prompt you to change the settings to fit your needs. - 7 -
Streszczenie treści zawartej na stronie nr. 8
8. Select the proper switch type corresponding to your need. Switch Type varies between countries. Although you have the option of “Automatic” as a selection, it is highly recommended that you choose a specific selec- tion to reduce the chance of incompatibility. Typically the selections are as follows: Area Switch Type Canada & United Northern Telecom & States NI-1 Japan INS Net 64 Taiwan DSS1 (ETSI) Europe DSS1 (ETSI) 9. Enter in the ISDN phone numbers and the Service Pro- fi
Streszczenie treści zawartej na stronie nr. 9
Quick Installation for Windows NT NDIS (PPP) -- Basic Internet Precautions: 1. This quick installation guide aims at helping you to setup the ISDN TA PCI Card and go to the Inter- net in NDIS mode with ease and efficiency. For CAPI mode, please refer to the user manual for details. 2. Before you proceed the following steps, make sure no old driver suites exist in your computer. Unin- stall any old driver suites that already exist, for these could hamper your computer system. Install
Streszczenie treści zawartej na stronie nr. 10
3. Click Have Disk… and click OK to continue. 4. If you are using disks to install the device driver, insert the device driver disk into the floppy disk drive of your system and enter the drive name, for example, A:, to continue. Or if you are using compact disc to install, in- sert the compact disc into the CD-ROM drive of your system and enter the CD-ROM drive letter followed by PCI\WINNT\DRIVERS, and click OK to continue. 5. When the Select OEM Option dialog box appears, clic
Streszczenie treści zawartej na stronie nr. 11
6. When the following dialog box appears, enter the re- quired data appropriately. 7. Click OK to continue. The installation program will proceed automatically. 8. When finished, a Setup Message will prompt you to invoke Remote Access Services (RAS) setup. Click OK to continue. 9. When the Network dialog box appears, select the Serv- ices tab. - 11 -
Streszczenie treści zawartej na stronie nr. 12
10. Select Remote Access Service. Click Properties. The following figure will appear. Select Add... When the Add RAS Device dialog box appears, select ISDN1 – ISDN_TA and click OK. Click Add... again to add ISDN2-ISDN_TA. When completed, click Continue. The Network dialog box will appear again. Click Close. The installation program will continue automatically. When finished, Windows will prompt you to restart your computer. Click Yes to continue. - 12 -
Streszczenie treści zawartej na stronie nr. 13
- 13 -
Streszczenie treści zawartej na stronie nr. 14
Installing the Applications 1. Insert the application software disk or compact disc into your computer. 2. Go to the Start menu. Click Run. 3. If you are using compact disc to install the application software, enter the CD-ROM drive letter followed by winnt\ntap\setup. Or if you are using disk, enter a: setup. The Configuration Utility installation program will proceed automatically. 4. Follow the on-screen instructions to continue. When finished, Windows will prompt you to res
Streszczenie treści zawartej na stronie nr. 15
Making a New Connection 1. Go to My Computer. Select Dial-Up Networking. 2. Click New... to name the phonebook appropriately. 3. Shift to the next tab to enter the required data. - 15 -
Streszczenie treści zawartej na stronie nr. 16
4. When finished, click OK. Select Dial to continue. 5. When the Connect to ISDN dialog appears, you are connected to the Internet. - 16 -
