Streszczenie treści zawartej na stronie nr. 1
Enterprise Reporter
QUICK START
GUIDE
Model: ER
ER3-100 (5K02-55), ER3-200 (5K02-56), ERS-100 (5K02-51),
ERS-200 (5K02-52), ERH-100 (5K02-61), ERH-200 (5K02-24)
Release: 5.0.00 / Updated: 01.07.09
®
Streszczenie treści zawartej na stronie nr. 2
8e 6 e nterprise r eporter Quick s artt Guide © 2009 8e6 Technologies. All rights reserved. This document may not, in whole or in part, be copied, photocopied, reproduced, translated, or reduced to any elec- tronic medium or machine readable form without prior written consent from 8e6 Technologies. Every effort has been made to ensure the accuracy of this document. However, 8e6 Technologies makes no war- ranties with respect to this documentation and disclaims any implied warranties of merchant
Streszczenie treści zawartej na stronie nr. 3
Contents R e e R nte R p ise RepoRteR i R nt oduCtion ......................................................1 About this Document ....................................................................................................................2 Conventions Used in this Document ...........................................................................................2 s R e C vi e i R nfo tionma ..................................................................................3 p RR elimina
Streszczenie treści zawartej na stronie nr. 4
“” h s R e R ve s peCifiCtionsa ......................................................................51 Physical Specifications ...............................................................................................................51 Hardware Component Specifications ........................................................................................52 Internal Product Specifications ..................................................................................................52
Streszczenie treści zawartej na stronie nr. 5
R e e nteRR p ise RR epo R te i ntRoduCtion Thank you for choosing to evaluate the 8e6 Technologies ER Enterprise Reporter. The ER is designed to readily obtain information about end users’ Internet activity via log files (text files containing Web access data) from a source device such as the 8e6 R3000 Enterprise Filter. ER “H” server models include RAID technology for fault tolerance and high perfor- mance. The ER is comprised of the ER server and client application. Once the ER server is c
Streszczenie treści zawartej na stronie nr. 6
About this Document This document is divided into the following sections: • Introduction - This section is comprised of an overview of the ER product and how to use this document • Service Information - This section provides 8e6 Technologies contact information • Preliminary Setup Procedures - This section includes instructions on how to physi- cally set up the ER in your network environment • Install the Server - This section explains how to configure the ER for reporting • Conclusion - This s
Streszczenie treści zawartej na stronie nr. 7
s R e C vi e i R nfo tionma The user should not attempt any maintenance or service on the unit beyond the proce- dures outlined in this document. Any initial hardware setup problem that cannot be resolved at your internal organiza- tion should be referred to an 8e6 Technologies solutions engineer or technical support representative. 8e6 Corporate Headquarters (USA) Local : 714.282.6111 Domestic US : 1.888.786.7999 International : +1.714.282.6111 8e6 Taiwan Taipei Local : 2397-0300 Domes
Streszczenie treści zawartej na stronie nr. 8
p RR elimina y s etup p RoCR edu es Unpack the Unit from the Carton Inspect the packaging container for evidence of mishandling during transit. If the packag- ing container is damaged, photograph it for reference. Carefully unpack the unit from the carton and verify that all accessories are included. Save all packing materials in the event that the unit needs to be returned to 8e6 Tech- nologies. The carton should contain the following items: • 1 Enterprise Reporter (ER) • 1 Bezel to be instal
Streszczenie treści zawartej na stronie nr. 9
Select a Site for the Server The server operates reliably within normal office environmental limits. Select a site that meets the following criteria: • Clean and relatively free of excess dust. • Well-ventilated and away from sources of heat, with the ventilating openings on the server kept free of obstructions. • Away from sources of vibration or physical shock. • Isolated from strong electromagnetic fields and noise caused by electrical devices such as elevators, copy machines, air conditio
Streszczenie treści zawartej na stronie nr. 10
Install the “H” Server Bezel Before rack mounting an “H” server, the bezel should be installed on the front end of the chassis. This portion of the installation process requires you to unpack the unit and bezel. NOTE: The bezel has been packaged separately from the unit to prevent dam- age during shipping. Front of bezel Outside of left inner rail Inside front end of U-shaped handle on left inner rail Inner left rail attached to chassis Pin on right side of bezel 6 8e 6 e nterprise r
Streszczenie treści zawartej na stronie nr. 11
A. Remove the plastic wrapping from the left and right U-shaped chassis rail handles. B. On one side of the chassis (left or right), un- screw the inner rail from the chassis. C. Slide the loosened inner rail slightly backwards to release it from the clips at the side of the chassis, and then lay it down beside the chas- sis, with the inside of the rail facing up. D. On the inner rail that is still attached to the chassis, insert the bezel pin into the bottom hole of the U-shaped chass
Streszczenie treści zawartej na stronie nr. 12
F. Return the loosened inner rail to its upright po- sition and insert the bezel pin into the bottom hole of the U-shaped handle. G. Slide the inner rail forward beneath the clips to lock it in place. H. Screw the inner rail back on the chassis. I. After it is installed, the bezel should drop down when it is gently tugged forward and down- ward. The bezel should remain upright when raised up and closed. 8 8e 6 e nterprise r terepor Q uick s tart G uide
Streszczenie treści zawartej na stronie nr. 13
Rack Mount the Server Rack Setup Precautions Warning: Before rack mounting the server, the physical environment should be set up to safely ac- commodate the server. Be sure that: • The weight of all units in the rack is evenly distributed. Hazardous conditions may be created by an uneven weight distribution. • The rack will not tip over when the server is mounted, even when the unit is fully extended from the rack. • For a single rack installation, stabilizers are attached to the rack. • For m
Streszczenie treści zawartej na stronie nr. 14
Rack Mount Instructions for non-“H” Servers Rack Setup Suggestions • Determine the placement of each component in the rack before you install the rails. • Install the heaviest server components on the bottom of the rack first, and then work up. Identify the Sections of the Rack Rails You should have received two rack rail assemblies with the 8e6 server unit. Each of these assemblies consists of two sections: An inner fixed chassis rail that secures to the unit (A), and an outer fixed rack ra
Streszczenie treści zawartej na stronie nr. 15
Install the Chassis Rails Position the fixed chassis rail sections you just removed along the side of the server chassis making sure the five screw holes line up. Note that these two rails are left/right specific. Screw the rail securely to the side of the chassis. Repeat this procedure for the other rail on the other side of the chassis. You will also need to attach the rail brackets when installing into a Telco rack. Locking Tabs: As you have seen, both chassis rails have a locking tab, wh
Streszczenie treści zawartej na stronie nr. 16
Install the Server into the Rack You should now have rails attached to both the chassis and the rack unit. The next step is to install the server chassis into the rack. Do this by lining up the rear of the chassis rails with the front of the rack rails. Slide the chassis rails into the rack rails, keeping the pressure even on both sides (you may have to depress the locking tabs when inserting). Installing the Server into a Telco Rack If you are installing the 8e6 server unit into a Telco t
Streszczenie treści zawartej na stronie nr. 17
Identify the Sections of the Rack Rails You should have received two rack rail assemblies with the 8e6 server unit. Each of these assemblies consists of two sections: An inner fixed chassis rail that secures to the unit (A), and an outer fixed rack rail that secures directly to the rack itself (B). Two pairs of short brackets to be used on the front side of the outer rails are also included. 8e 6 e nterprise r terepor Q uick s tart G uide
Streszczenie treści zawartej na stronie nr. 18
Rack Mount Instructions for “H” Servers Rack Setup Suggestions • Determine the placement of each component in the rack before you install the rails. • Install the heaviest server components on the bottom of the rack first, and then work up. Install the Inner Rails Both the left and right side inner rails have been pre-attached to the chassis. Proceed to the next step. Install the Outer Rails Begin by measuring the distance from the front rail to the rear rail of the rack. Attach a short brac
Streszczenie treści zawartej na stronie nr. 19
Install the Server into the Rack You should now have rails attached to both the chassis and the rack unit. The next step is to install the server chassis into the rack. Do this by lining up the rear of the chassis rails with the front of the rack rails. Slide the chassis rails into the rack rails, keeping the pressure even on both sides (you may have to depress the locking tabs when inserting). When the server has been pushed completely into the rack, you should hear the locking tabs “clic
Streszczenie treści zawartej na stronie nr. 20
Installing the Server into a Telco Rack If you are installing the 8e6 server unit into a Telco type rack, follow the directions given on the previous page for rack installation. The only difference in the installation proce- dure will be the positioning of the rack brackets to the rack. They should be spaced apart just enough to accommodate the width of the Telco rack. 6 8e 6 e nterprise r terepor Q uick s tart G uide
