Instrukcja obsługi Konica Minolta CM-SA

Streszczenie treści zawartej na stronie nr. 1

Skin Analysis Software CM-SA
Installation Guide
Software License Agreement
The terms of the license agreement of the CM-SA software are provided in the Software License Agreement dia-
log box displayed on-screen during the installation process. This software can be installed only if you agree to all
the terms of the agreement.
Safety Precautions
Before you use the CM-SA software, we recommend that you thoroughly read this manual as well as the
instruction manuals of your PC and the instrument.

Streszczenie treści zawartej na stronie nr. 2

1. Installing the software The CM-SA software is provided on a CD-ROM. A CD-ROM drive is required to install the software. When installing the software, you must log on to the computer as a user with Administrator privileges. 1.1 Installation procedure Install the CM-SA software. If your OS is Windows Vista or Windows 7, a dialog which checks User Account Control is displayed during the process. When this dialog box is displayed, click Continue. 1. Start Windows on your computer. 2. Insert the

Streszczenie treści zawartej na stronie nr. 3

2.1 Connecting to a PC/Installing the USB Driver (When the RS-232C cable or USB cable is used.) Although the USB cable can be connected/disconnected while the instrument and PC are turned ON, you need to turn them OFF in the procedure below. 1. Turn off both the instrument and the computer. 2. Connect the instrument and the computer via the RS-232C cable or USB cable as illustrated. Connect the computer end of the cable to the serial port (when the RS-232C cable is used) or USB port (when the

Streszczenie treści zawartej na stronie nr. 4

6. If you were not able to install the USB driver using the procedure above, install it from Device Manager. From the Start menu, right-click “My Computer” or “Computer” and select “Properties” to open Device Manager. Right click “Spectrophotometer CM-700/600 Series” and select “Update Driver”. Select the folder where CM-SA has been installed and specify Kmsecm700.inf. 7. Check which COM port of the PC the instrument has been assigned to. From the Start menu, right-click “My Computer” or “Comp