Instrukcja obsługi Rolls RM65b

Streszczenie treści zawartej na stronie nr. 1

LIMITED WARRANTY
This product is warranted to the original consumer purchaser to be free from
defects in materials and workmanship under normal installation, use and service for a
period of one (1) year from the date of purchase as shown on the purchaser’s receipt.
The obligation of Rolls Corporation under this warranty shall be limited to repair
or replacement (at our option), during the warranty period of any part which proves
defective in material or workmanship under normal installation, use

Streszczenie treści zawartej na stronie nr. 2

INTRODUCTION SCHEMATIC Thank you for your purchase of the Rolls RM65b HexMix Professional Audio Mixer. This unit is a breakthrough in size/performance for an audio mixer. It’s a full- function 6 channel mic/line mixer in a single space 19” rack chassis. It is intended for sound reinforcement, studio, choir, and other applications where high channel to size ratio is desired. Each mic input has individual phantom power switches and input gain trims located on the rear panel. Each channel features

Streszczenie treści zawartej na stronie nr. 3

SPECIFICA SPECIFICAT TI IO ONS NS SPECIFICA SPECIFICA SPECIFICAT T TI I IO O ONS NS NS TREBLE: Controls the boost or cut of frequencies above 400 Hz for each channel. Input Impedance: 20K Ohms balanced PAN: Adjusts the amount of relative signal to the Right, Left or both Main Out 10K Ohms unbalanced (1/4") jacks. FX SEND: Controls the amount of signal (post-volume control) that is sent for that Output Impedance: 50 OhmsTRS Balanced channel to the FX Send jack. Max Input Level: +10 dBV XLR +10 dB

Streszczenie treści zawartej na stronie nr. 4

OPERATION The RM65b is ideal for small combo groups where a small number of instruments and The RM65b may also be used for recording. Connect microphones, instruments, and microphones need to be mixed together. Refer to Figure 2 for an example of how to effects to the inputs as described above - the connect the Right and Left outputs to your connect the inputs and outputs of your RM65b. Connect microphones to balanced XLR recording device and set the levels accordingly. cables and to the XLR inp