Instrukcja obsługi Behringer Digital Revern/Delay DR400

Streszczenie treści zawartej na stronie nr. 1

DIGITAL REVERB/DELAY DR400
Digital Stereo Reverb/Delay Effects Pedal
Thank you for showing your confidence in us by purchasing the BEHRINGER DIGITAL REVERB/
DELAY DR400. This Reverb/Delay effects pedal delivers 24-bit high-resolution stereo reverb and
delay effects. Experience state-of-the-art sounds comparable to studio processors in one compact pedal.
1. Controls
(1) Select the effect mode via the MODE
(5) (2)
switch (see table below).
(2) Depending on the selected mode,
(4) (1)
this knob

Streszczenie treści zawartej na stronie nr. 2

DIGITAL REVERB/DELAY DR400 The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to scratch the unit. ◊ The DR400 has no On/Off switch. It is operable as soon as you insert a plug into the IN connector. Disconnect the plug, if you don’t use the DR400. In doing so, you can extend the life time of the battery. The SERIAL NUMBER is located at the under