Instrukcja obsługi Verbatim Optical Travel97253

Streszczenie treści zawartej na stronie nr. 1

Wireless Travel Mouse with Stow-Away Receiver
User Manual

Product Features

1. Radio frequency 27MHz wireless transmission
2. Use of 256 ID codes to prevent interference between several wireless mice being used
simultaneously
3. Automatic power sleep function to extend battery life
4. Storage area for receiver in the mouse

System Compatibility
Win 95/98/Me/2000/XP
Macintosh 9.x, 10.x

Initial Set up

1. Turn the computer power on and log in
2. Connect wireless mouse receiver

Streszczenie treści zawartej na stronie nr. 2

8. Now the mouse is ready for use Battery Installation 1. See Figure 2 below. 2. While pushing down on the area indicated push both sides of the cover off simultaneously. Figure 2 3. Insert 2 x AAA batteries as indicated 4. Replace the mouse cover over the batteries 5. To turn the mouse power on push the ID button, as indicated by Figure 3 below, for 3 seconds or more until the light comes on Figure 3 Receiver Storage 1. See Figure 4 below 2. Push on area indicated by the arrow

Streszczenie treści zawartej na stronie nr. 3

Figure 4 Note: 1. Please remove the batteries if the mouse will not be used for an extended period of time 2. If the mouse has entered power sleep mode please press any mouse button or move the mouse to make it active again 3. To turn the mouse power off click on the ID button on the underside of the mouse for over 3 seconds until the light turns off 4. Optical mouse will not operate correctly on any reflecting surface such as glass or 3D mouse pads Caution Any changes or modificati