Streszczenie treści zawartej na stronie nr. 1
www.igo.com
™ ®
iGo Stowaway
®
Bluetooth Mouse
Owner’s Manual
for
™
Pocket PC 2003/Windows Mobile 5
Apple Macintosh OS X
®
Windows XP
Microsoft
Mouse/Keyboard Driver:
Stowaway 4.51
Stowaway Bluetooth Mouse Owner’s Manual
Page 1
Streszczenie treści zawartej na stronie nr. 2
Installing the Mouse with Macintosh OS X....................3 Before You Begin....................................................................................3 Creating a Paired Connection with your Macintosh ............................3 Installing the Mouse for Use with Windows XP............4 Before You Begin....................................................................................4 Creating a Paired Connection with your PC.......................................
Streszczenie treści zawartej na stronie nr. 3
Installing the Mouse with Macintosh OS X Before You Begin Determine that your Macintosh is Bluetooth-enabled with either a built-in Bluetooth component, or via an external hardware adaptor (Dongle). Ensure that the accompanying Bluetooth software (Stack) is installed. It is not necessary to disable or remove your existing mouse software. (Refer to the User’s Guide included with your Macintosh with any questions on your current mouse.) Insert the 2 AAA batteries (included) b
Streszczenie treści zawartej na stronie nr. 4
Installing the Mouse for Use with Windows XP Before You Begin Determine that your PC is Bluetooth-enabled with either a built-in Bluetooth component, or via an external hardware adaptor (Dongle). Ensure that the accompanying Bluetooth software (Stack) is installed. It is not necessary to disable or remove your existing mouse software. (Refer to the User’s Guide included with your PC with any questions on your current mouse.) Insert the 2 AAA batteries (included) beneath the
Streszczenie treści zawartej na stronie nr. 5
Setting up the Mouse with Pocket PC Before You Begin Before you install the Stowaway keyboard and mouse software for Pocket PC 2003/Windows Mobile 5.0 PDAs: ActiveSync 4.0 or greater is required to install the keyboard driver application. Disable or uninstall any other keyboard or mouse applications that you have previously installed on your mobile device. Ensure there is at least 250 KB of memory on your mobile device. To check the available memory, tap Start Settings
Streszczenie treści zawartej na stronie nr. 6
Configuring the Mouse to Your Device 1. After the driver installation completes, the Stowaway Settings screen will display and you will be prompted to Choose device to setup. Select the Stowaway Bluetooth Mouse and tap Setup. 2. The Select mouse pointer mode screen will display for selecting Enhanced or Safe pointer mode: a. Enhanced mode – Works for most PDAs. Try Enhanced mode first. b. Safe mode – In the event that display issues arise with Enhanced m
Streszczenie treści zawartej na stronie nr. 7
4. Once the PDA resets, the Confirm mouse pointer mode screen will display. If the PDA display is working properly, accept Enhanced mode by selecting Enhanced again, and tapping OK. Otherwise, select Safe and tap OK. 5. On Pocket PC devices with Windows Mobile 5.0 you may see a screen warning that the Stowaway Mouse driver will not work with the built-in Bluetooth Keyboard driver. You must tap Disable built-in HID driver in order for the mouse to work correc
Streszczenie treści zawartej na stronie nr. 8
7. Then tap the Connect button on the screen. The status will read Scanning for a mouse. 8. The status will change to Initializing connection. During the initialization stage, the application starts the Pocket PC Bluetooth system software, known as the Bluetooth Stack. 9. Once a mouse is detected, the application will begin Verifying connection by prompting you to move the mouse and click in the red box provided. This will verif
Streszczenie treści zawartej na stronie nr. 9
10. If the connection process is successful, the Mouse connection enabled message will display on the Pocket PC device. This is the normal mode for wireless communication between the Stowaway Mouse and the Pocket PC device during use. 11. In the event that several Stowaway Bluetooth mice (or BT keyboards) happen to be nearby and in Discoverable mode, the scan will display all of these devices in the list. Compare the ID (Bluetooth address) of the device you
Streszczenie treści zawartej na stronie nr. 10
13. If the mouse has previously been connected with your Pocket PC but you have pressed the Discoverable mode button during normal use, the mouse will lose its bond with your handheld device. Tap Connect to reestablish the bond. 14. On the Advanced page, there are buttons provided to select Power efficient mode and Mouse Pointer mode. a. Power efficient mode – Allows you to enable the Stowaway Mouse application to Auto-detect the proper power setting for your d
Streszczenie treści zawartej na stronie nr. 11
15. When the mouse batteries reach Low or Critical, a warning message will also be displayed on the Today screen. 16. If the mouse driver fails to detect a supported Bluetooth stack during the initial setup or at a later time (e.g. after power on), it will display the Bluetooth system not detected message on the Connection page. This should not happen on Pocket PC devices with a built-in Widcomm stack version 1.4.x or later or Microsoft stack, since it is alw
Streszczenie treści zawartej na stronie nr. 12
Reconnecting the Stowaway Mouse Despite a high degree of reliability, the Bluetooth connection could break for many reasons: When the mouse is powered off, the mouse circuit will be powered off, and the Bluetooth connection will be lost. As a power saving feature, the mouse will be automatically powered down after an idle period (when there is no activity for approximately 5 minutes). When the Pocket PC device is turned off, the established Bluetooth connection will be los
Streszczenie treści zawartej na stronie nr. 13
Bluetooth Accessibility For those using Windows Mobile 2003 or a non-Microsoft Bluetooth stack, there are two Bluetooth settings that affect how the mouse and the mobile device connect. If your Stowaway Mouse software returns to waiting mode, and pressing a mouse button will not trigger reconnection with the PDA, this may be because the Bluetooth stack is awaiting a signal only from a previously paired device, (such as if you had been using a Secured keyboard connection). If you want th
Streszczenie treści zawartej na stronie nr. 14
Customizing Mouse Functions Once the mouse software is installed on the Pocket PC device, you may customize the options. A mouse icon will display in the lower right corner of the screen while using Calendar, Contacts, or other applications. Tap the mouse icon on the bottom toolbar to display the Mouse Control Panel. Tap the keyboard icon at the Mouse Control Panel to display the Input Method Toolbar. Input Method Toolbar There are four icons that appear on the Input M
Streszczenie treści zawartej na stronie nr. 15
Mouse Control Panel On the Mouse tab: Tap Enable to choose which device to enable (the next screen will allow you to select the Stowaway Mouse). Tap Disable to turn off access to the mouse. To select Button Assignments for custom applications to launch, or functions to perform with each of the mouse buttons, tap the down- arrows following the Left, Middle and/or Right drop down lists. To increase mouse pointer speed, drag the Mouse Speed slider to the right. To decrease key r
Streszczenie treści zawartej na stronie nr. 16
Disabling the Stowaway Mouse When the Stowaway Mouse is no longer needed, you can disable it by tapping the Disable button, on the Connection or Mouse page. The Connection is not set up message will then be displayed on the Connection page. NOTE: Disabling the Stowaway Mouse will not automatically turn off the Bluetooth radio. Conversely, turning the Bluetooth radio off while the Stowaway BT keyboard driver is still enabled will not work. Because of the behavior of the Bluetooth stac
Streszczenie treści zawartej na stronie nr. 17
Using the Stowaway Mouse Moving the Pointer/Highlighting Text Using default mouse functions: Mouse movements and Mouse button clicks, you can easily navigate, position the cursor, and select text for subsequent editing functions. You may also customize mouse functionality with the Left, Middle and Right Button Assignment options via the Mouse tab: To Perform/Navigate Press Mouse Click Left mouse button (default) Launch Mouse Settings Middle mouse button (default) Context Menu Rig
Streszczenie treści zawartej na stronie nr. 18
Menu and Toolbar Navigation You can access program menus, submenus, and toolbars with the Stowaway Mouse using the following activities. Action To activate a program’s menu bar at the bottom of the Pocket PC device screen and select a main menu item: • Mouse click on the menu title, then move the mouse and click on the menu item, or submenu you want to activate. To access a program’s toolbar at the top or bottom of the Pocket PC device screen: • Mouse click on the desired tool on t
Streszczenie treści zawartej na stronie nr. 19
Frequently Asked Questions Q: My mouse and handheld are in-range and powered on, why won’t they reconnect after a mouse button press? If Bluetooth Accessibility is set to Paired devices only, the mouse may not automatically reconnect. To allow the mouse to reconnect with a button press, change the default settings within the Bluetooth accessibility settings, see Bluetooth Accessibility. Q: What should I do when I try to use the mouse and nothing happens? • Verify that the Pock
Streszczenie treści zawartej na stronie nr. 20
Q: I received an error message saying the keyboard/mouse driver cannot find a supported Bluetooth component, what should I do? The current version of the keyboard/mouse driver supports Widcomm Bluetooth for Windows CE (BTW-CE) version 1.4.1 or later, and Microsoft stack version TBD. If you have a different version, you may need to check for upgrades for either the Bluetooth stack or for the mouse driver. (To determine the version of the Bluetooth stack installed on your Pocket PC device
