Streszczenie treści zawartej na stronie nr. 1
Hotwire 6310 MVL Modem Customer Premises
Installation Instructions
Document Number 6310-A2-GN10-40
February 2000
Contents
Hotwire 6310 MVL Modem Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installing the Hotwire MVL Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Power-On . . . . . . . . . . . . . . . . . . . . . . .
Streszczenie treści zawartej na stronie nr. 2
POWER ETHERNET POWER ETHERNET PHONE LINE PHONE LINE Hotwire MVL System Copper pairs run from the central office (CO) to the customer premises (CP) to create the local loop. The local loop terminates on the customer premises at the demarcation point. Customer Premises (CP) Central Office MVL (CO) Modem MVL/POTS Local Loop End-user Ethernet Network Ethernet Systems or Crossover Service Cable (up to 32) Cable Provider Demarcation (NSP) Point Hub 98-15930a-02 MVL – Multiple Virtual Lines POTS – Plai
Streszczenie treści zawartej na stronie nr. 3
NOTES: In this document: — A telephone is used to represent any equipment that plugs into a phone jack and uses the POTS line, such as a phone, modem, or fax machine. — End-user system is used to represent any PC with an Ethernet connection and MVL-based service. — Service provider is used to represent any Internet Service Provider (ISP) or remote LAN access provider. Before You Begin Verify that your package contains the following: Hotwire 6310 MVL Modem MVL interface cable with RJ11 connec
Streszczenie treści zawartej na stronie nr. 4
POWER ETHERNET PHONE LINE Product-Related Documents To install a phone filter, refer to the appropriate document: Document Number Document Title 6035-A2-GN11 Hotwire 6035 MVL Phone Filter Installation Instructions 6040-A2-GN11 Hotwire 6040 MVL Wall Jack Phone Filter Installation Instructions Contact your sales or service representative to order additional product documentation. Paradyne documents are available on the World Wide Web at www.paradyne.com. Select Library → Technical Manual → Hotwire
Streszczenie treści zawartej na stronie nr. 5
PHONE POWER ETHERNET POWER ETHERNET PHONE LINE PHONE LINE 3. Connect a telephone (optional); go to Step 4 if you are not connecting a telephone to the MVL modem. The 6035 phone filter has a cable attached. Plug the other end of this cable into the MVL modem jack labeled PHONE. Using the existing telephone interface cable that was unplugged in Step 1, plug into the POTS filter jack labeled PHONE. MVL Modem Supplied Existing Cable Cable 99-16239-01 4. Use an 8-pin Ethernet cable for the Ethernet c
Streszczenie treści zawartej na stronie nr. 6
POWER ETHERNET POWER ETHERNET PHONE LINE PHONE LINE Use an Ethernet crossover cable and connect the other end to a PC with an Ethernet Network Interface Card (NIC) installed. MVL Modem Ethernet Line PC with Ethernet Network Interface Card Ethernet Cable 98-15907 For MVL modem cable pin assignments, refer to Cables & Connectors on page 10. 5. Insert the supplied power cord’s round end into the jack labeled POWER. Attach the supplied ferrite choke as closely as possible to the MVL modem. Pass th
Streszczenie treści zawartej na stronie nr. 7
The MVL modem hardware installation is now complete. When the power cord is installed, the MVL modem goes through a power-on self-test. Power-On When power is applied, the MVL modem performs self-diagnostics and the PWR LED is on. The self-diagnostics includes a power-on self-test and all of the LEDs turn on for one second. Power – green Alarm – red Test – yellow Multiple Virtual Lines – green Transmit/Receive – green Ethernet Link – green PWR ALM TST ETHERNET LINE TX/RX MVL MODEM TM 99-15896-01
Streszczenie treści zawartej na stronie nr. 8
Status LEDs All of the LEDs turn on and off during the power-on self-test. After a successful self-test, the LEDs should appear as indicated in BOLD in the Condition column below. LED State Status PWR ON MVL modem has power. ALM OFF No active alarms. ON An alarm condition exists. TST OFF No active tests. ON The TST LED is on during the power-on self-test and during a test initiated by the Service Provider. LINE ON The MVL link is active and ready to transmit and receive data. OFF The MVL link ha
Streszczenie treści zawartej na stronie nr. 9
LED Symptom Action LINE LED is off. Verify that the MVL LINE cable is securely installed on both ends. If the problem continues, contact the Service Provider. Verify that the line has dial tone. If there is no dial tone, contact the Service Provider. LINE LED is on and The MVL link has been established but there is no data there is no data transmission. Verify the Ethernet connection. If the problem transmission. persists, contact the Service Provider. LINE and Ethernet The MVL and Ethernet link
Streszczenie treści zawartej na stronie nr. 10
POWER ETHERNET POWER ETHERNET PHONE LINE PHONE LINE To enable the sharing of resources and review security considerations, see Microsoft’s Web site at www.microsoft.com. In this example of HomeLink, the PC in the family room could use the office printer. Office Family Room MVL Modem FAX RJ11 MVL Modem Hub Wall Jack RJ11 Wall Jack Ethernet Printer Cable 98-15952a-01 Increasing the Number of End-User Systems A single end-user system is attached to the Hotwire 6310 MVL Modem by using an Ethernet cr
Streszczenie treści zawartej na stronie nr. 11
The Ethernet interface connector uses an 8-pin, non-keyed modular plug. — To connect the MVL modem to an Ethernet hub, use the straight-through connection. 8-Pin Straight-Through Connection Ethernet Cable Pin # Function 1 10BaseT TX D+ 2 10BaseT TX D– 8-Pin 3 10BaseT RX D+ Plug 4 & 5 Not used 6 10BaseT RX D– 7 & 8 Not used Pin #8 Pin #1 98-16055a — To connect the MVL modem directly to a PC with an Ethernet NIC card, use an Ethernet crossover cable. 8-Pin Ethernet Crossover Cable Function Pin #
Streszczenie treści zawartej na stronie nr. 12
Optional MVL Modem Wall Placement The Hotwire 6310 MVL Modem is designed for tabletop placement. The MVL modem can also be mounted on a wall. To mount the modem, you will need: Three slotted-head #6 self-threading screws with molly bolts Drill and 3/16” drill bit for the molly bolts Screwdriver A template with the dimensions for the three screws is provided. See MVL Modem Hardware Template on page 9. Procedure To mount the Hotwire 6310 MVL Modem: 1. Use a drill to install the plastic anc
Streszczenie treści zawartej na stronie nr. 13
MVL Modem Hardware Template 5.43" Front (LEDs) 7.55" To Bottom Hole 98-16171 13
Streszczenie treści zawartej na stronie nr. 14
Hotwire 6310 MVL Modem Technical Specifications * Item Specification Height x Width x Depth 1.43″ x 6.00″ x 8.75″ (3.64 cm x 15.24 cm x 22.23 cm) Weight 1 lb. 1 oz. (0.48 kg) Power Input: 100 Vac (+10%), 50 Hz; 120 Vac (+10%), 60 Hz; or Class 2 Transformer normal 230 Vac (+10%), 50/60 Hz service input voltage range Output: 15 Vdc nominal, minimum 0.6A (SELV) Approvals FCC Part 15 Class B digital device CISPR 22 Class B requires the supplied ferrite choke. Safety Certifications Refer to equipment
Streszczenie treści zawartej na stronie nr. 15
! Important Safety Instructions 1. Read and follow all warning notices and instructions marked on the product or included in the manual. 2. Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these slots and openings must not be blocked or covered. 3. Do not allow anything to rest on the power cord and do not locate the product where persons will walk on the power cord. 4. Do not attempt to service this p
Streszczenie treści zawartej na stronie nr. 16
CE Marking When the product is marked with the CE mark on the equipment label, this demonstrates full compliance with the following European Directives: Directive 73/23/EEC – Council Directive of 19 February 1973 on the harmonization of the laws of the member states relating to electrical equipment designed for use within states relating to electrical equipment designed for use within certain voltage limits, as amended by Directive 93/68/EEC. Directive 89/336/EEC – Council Directive of 3 May
Streszczenie treści zawartej na stronie nr. 17
Declaration of Conformity This Declaration of Conformity is made by Paradyne Corporation pursuant to Parts 2 and 15 of the Federal Communications Commission’s Rules. This compliance information statement pertains to the following products: Trade Name: Hotwire Model Number: 6310-A2-200 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference receive
Streszczenie treści zawartej na stronie nr. 18
United States – Notice to Users of the Telephone Network 1. This equipment complies with Part 68 of the FCC rules. On the equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. The label is located on the bottom of your modem. 2. The Hotwire 6310 MVL Modem connects to the Public Switched Telephone Network (PSTN) using the Universal Service Order Code (USOC) RJ11C. 3. The Ringer Equivalence (REN) is used to
Streszczenie treści zawartej na stronie nr. 19
Notice to Users of the Canadian Telephone Network The Industry Canada label identifies certified equipment. This certification means that the equipment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is permissible to be connect
Streszczenie treści zawartej na stronie nr. 20
Warranty, Sales, Service, and Training Information Contact your local sales representative, service representative, or distributor directly for any help needed. For additional information concerning warranty, sales, service, repair, installation, documentation, training, distributor locations, or Paradyne worldwide office locations, use one of the following methods: Internet: Visit the Paradyne World Wide Web site at www.paradyne.com. (Be sure to register your warranty at www.paradyne.com/wa
