Streszczenie treści zawartej na stronie nr. 1
DSL-200 ADSL USB Modem
User’s Guide
First Edition (Aug., 2000)
6DSL200H..01
Printed In Taiwan
RECYCLABLE
Streszczenie treści zawartej na stronie nr. 2
DSL-200 ADSL USB Modem User’s Guide Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Vervenden Sie keine Flüssig- oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4. Um eine Beschädigung des Gerätes zu vermeiden sollten Sie nur Zubehörteile verwenden, die vom Hersteller zugelassen sind. 5. Das Gerät is vor Feuc
Streszczenie treści zawartej na stronie nr. 3
DSL-200 ADSL USB Modem User’s Guide Limited Warranty Hardware: D-Link warrants its hardware products to be free from defects in workmanship and materials, under normal use and service, for the following periods measured from date of purchase from D-Link or its Authorized Reseller: Product Type Warranty Period Complete products One year Spare parts and spare kits 90 days The one-year period of warranty on complete products applies on condition that the product's Registration Card is filled out an
Streszczenie treści zawartej na stronie nr. 4
DSL-200 ADSL USB Modem User’s Guide may otherwise be provided free of charge. D-Link's sole obligation under this software warranty shall be to replace any defective software product with product which substantially conforms to D-Link's applicable product documentation. Purchaser assumes responsibility for the selection of appropriate application and system/platform software and associated reference materials. D-Link makes no warranty that its software products will work in combination with an
Streszczenie treści zawartej na stronie nr. 5
DSL-200 ADSL USB Modem User’s Guide Trademarks Copyright 2000 D-Link Corporation. Contents subject to change without prior notice. D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. All other trademarks belong to their respective proprietors. Copyright Statement No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Syste
Streszczenie treści zawartej na stronie nr. 6
DSL-200 ADSL USB Modem User’s Guide Table of Contents 0 ABOUT THIS USER’S GUIDE................................................................................................................... 1 PREFACE.................................................................................................................................................................. 1 OVERVIEW OF THE USER’S GUIDE ......................................................................................................
Streszczenie treści zawartej na stronie nr. 7
DSL-200 ADSL USB Modem User’s Guide 0 ABOUT THIS USER’S GUIDE This user’s guide tells you how to install your DSL-200 ADSL USB Modem and use it to connect to the Internet. Preface For simplicity, this documentation uses the terms “Modem” (first letter upper case) to refer to the DSL-200 USB Modem and “modem” (first letter lower case) to refer to all DSL modem devices, including the DSL-200. Overview of the User’s Guide ♦ Chapter 1 – Introduction provides a brief description of ADSL technology an
Streszczenie treści zawartej na stronie nr. 8
DSL-200 ADSL USB Modem User’s Guide 1 BEFORE YOU START This section discusses all the requirements for successful installation and operation of the Modem. In order to avoid problems please read this section and make sure you understand all the prerequisites for proper installation of your new Modem. Operating Systems The D-Link DSL-200 can be used with PCs running Microsoft® Windows 98, Windows 98 Second Edition or Windows 2000. USB Port In addition to the Windows OS, you will need a USB (Univer
Streszczenie treści zawartej na stronie nr. 9
DSL-200 ADSL USB Modem User’s Guide Micro-filters Since ADSL and telephone services share the same copper wire to carry their respective signals, a filtering mechanism must be used to avoid mutual interference. You will need to install a micro-filter (low pass filter) device for each telephone that shares the line with the ADSL line. Micro-filters are easy to install in-line devices which attach to the telephone cable between the telephone and wall jack. Your telephone company or ISP will have m
Streszczenie treści zawartej na stronie nr. 10
DSL-200 ADSL USB Modem User’s Guide 1 2 INTRODUCTION ADSL modem technology is a relatively new technology and may be unfamiliar to the reader. In this section, we introduce you to ADSL technology and give a brief description of its key attributes. We also give a general description of the D-Link DSL-200 USB Modem and its main features. What is ADSL? Asymmetric Digital Subscriber Line (ADSL) is an access technology that utilizes ordinary copper telephone lines to enable broadband high-speed digit
Streszczenie treści zawartej na stronie nr. 11
DSL-200 ADSL USB Modem User’s Guide Unpacking Open the shipping carton and carefully remove all items. In addition to this User's Guide, ascertain that you have: 1. D-Link DSL-200 USB Modem 2. USB cable 3. ADSL cable or connector 4. Installation CD-ROM 5. User’s Guide Modem Description and Operation The DSL-200 ADSL USB Modem is easy to install and use. The DSL-200 ADSL Modem connects directly a USB port on a PC with standard USB cable. Software drivers for D-Link ADSL Modems can be fully upgrad
Streszczenie treści zawartej na stronie nr. 12
DSL-200 ADSL USB Modem User’s Guide Rear Panel Both the USB and ADSL cables connect at the rear of the Modem. Front Panel LED Indicators There are two LED indicators on the Modem: ♦ Power - This indicates that the Modem is powered on. ♦ ADSL Link – This indicates a valid ADSL link has been established. 6
Streszczenie treści zawartej na stronie nr. 13
DSL-200 ADSL USB Modem User’s Guide 2 3 MODEM INSTALLATION This chapter describes the physical installation of the Modem and its connections. Connect and Install Modem To install the Modem, perform the following steps: 1. Insert the Installation CD disk into the CD-ROM drive. 2. Insert one end of the ADSL cable (26 AWG twisted-pair telephone cable) into the telephone wall jack (RJ-11 port). 3. Insert the other end of the ADSL cable into the ADSL port (RJ-11 port) on the Modem. 4. Insert the rec
Streszczenie treści zawartej na stronie nr. 14
DSL-200 ADSL USB Modem User’s Guide 3 4 SOFTWARE INSTALLATION The DSL-200 can be used with the following operating systems: ♦ Microsoft Windows 98 ♦ Microsoft Windows 98 Second Edition ♦ Microsoft Windows 2000 The procedures for each system are slightly different so be sure to follow the instructions provided for your PC’s operating system. The Microsoft Plug and Play feature will automatically detect the modem after it has been installed. A new window will appear for each step of the install
Streszczenie treści zawartej na stronie nr. 15
DSL-200 ADSL USB Modem User’s Guide Installing the Software Driver on Windows 98 or Windows 98 Second Edition This section describes the procedure used to install a software driver on a PC running either the Windows 98 or Windows 98 Second Edition operating system. A software driver is required to operate the Modem. You have a choice of two different drivers, the LAN (Local Area Network) or WAN (Wide Area Network) driver. Only one driver is needed to operate the Modem and only one driver should
Streszczenie treści zawartej na stronie nr. 16
DSL-200 ADSL USB Modem User’s Guide 2. Select the “Search for the best driver…” option by clicking inside the circle to the left of it, and click the Next button. 3. In the “Add New Hardware” select the “Specify a location:” option by clicking in the white box to the left. A check mark (!) will appear in the box indicating you have selected this option. Use the pull-down menu to highlight the correct location for the driver you want to install. Click Next. 10
Streszczenie treści zawartej na stronie nr. 17
DSL-200 ADSL USB Modem User’s Guide 4. This window informs you that the device driver is ready for installation. Check to make sure that the correct driver (WAN or LAN) is listed in this window. If the driver you wish to install is listed here, click Next. 5. After the driver has been installed you will be presented with a window informing of its completion. Click Finish to continue to the “Properties” window. 11
Streszczenie treści zawartej na stronie nr. 18
DSL-200 ADSL USB Modem User’s Guide 6. You will now be presented with the Modem Properties window. The DSL Settings tab will be displayed, it lists the Mode, and the default VCI and the VPI numbers, 88 and 0 respectively. Your telephone company or ISP should have given you VCI and VPI numbers. You will need to enter those numbers here. To change the default settings, click on the corresponding VCI and VPI number to highlight it, and type in the appropriate number. When both numbers are entered c
Streszczenie treści zawartej na stronie nr. 19
DSL-200 ADSL USB Modem User’s Guide Installing the Software Driver on Windows 2000 This section describes the procedure used to install a software driver on a PC running the Windows 2000 operating system. A software driver is required to operate the Modem. You have a choice of two different drivers, the LAN (Local Area Network) or WAN (Wide Area Network) driver. Only one driver is needed to operate the Modem and only one driver should be installed. The following instructions can be used for eith
Streszczenie treści zawartej na stronie nr. 20
DSL-200 ADSL USB Modem User’s Guide 2. Select the “Search for a suitable driver…” option by clicking inside the circle to the left of it, and click the Next button. 3. The “CD-ROM disk drives” option and the “Floppy disk drives” option should already be selected as indicated by the check mark (!) in the box. Click Next. 14
