Streszczenie treści zawartej na stronie nr. 1
1200 WATTS/1800 WATTS/2200 WATTS-HEAVY DUTY COMMERCIAL MICROWAVE OVEN
FOUR À MICRO-ONDES COMMERCIAL SERVICE INTENSE 1200 WATTS/1800 WATTS/2200 WATTS
HORNO MICROONDAS COMERCIAL PARA SERVICIO PESADO - 1200 VATIOS/1800 VATIOS/2200 VATIOS
MODELS/MODÈLES/MODELOS
R-CD1200M/CD1800M/CD2200M
OPERATION MANUAL/MODE D’EMPLOI/MANUAL DE OPERACIÓN
FOR CUSTOMER ASSISTANCE
POUR L’ASSISTANCE À LA CLIENTÈLE
PARA ASISTENCIA AL CONSUMIDOR
To aid in reporting this commercial microwave oven in case of loss or theft, p
Streszczenie treści zawartej na stronie nr. 2
CONTENTS For Customer Assistance Front cover Multi Stage Cooking 10 Contents 1 Express Defrost 11 Precautions to Avoid Possible Exposure Express Defrost Chart 11 to Excessive Microwave Energy 1 Program & Customize 12 Limited Warranty 2 Custom Help 12 Important Safety Instructions 3 Counter Check 14 Service Call Check 4 To Reset the Counter to “0” 15 Grounding Instructions 5 Saving Memories 18 Installation 6 Other Convenient Features 23 Part Names 7 Demonstration Mode 23 Before Operation 8Mon
Streszczenie treści zawartej na stronie nr. 3
LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the fi rst end-user purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part there of with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not appl
Streszczenie treści zawartej na stronie nr. 4
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should be followed, including the following: WARNING - To reduce the risk of burns, electric shock, fi re, injury to persons or exposure to excessive microwave energy: 1. Read all instructions before using the appliance. 2. Read and follow the specifi c “PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY” on page EN-1. 3. This appliance must be grounded. Connect only to properly grounded
Streszczenie treści zawartej na stronie nr. 5
SERVICE CALL CHECK Please check the following before calling for service! 1. Plug the power cord into a three-pronged electric-outlet. (See page EN-5) 2. Open the door A. Does the oven light come on? Yes ____________No 3. Place one cup of water (approx. 250ml) in a microwave-safe glass measuring cup in the oven and close the door securely. Oven lamp should go off if door is closed properly. Set the oven for 30 seconds on 100% (HIGH). At this moment: Press these pads: SELECT START 30 TIME
Streszczenie treści zawartej na stronie nr. 6
MAINTENANCE MODE Should any of maintenance indicators appear in the display, follow the instruction: CC Mode Reason Action required CC1 Operation time of magnetrons exceeds Call for service to replace the parts promptly. Failure to CC2 1,250 hours. replace parts that have exceeded recommended operation time may cause failure of the microwave oven. CC4 Operation time of the control unit, relays, switches exceeds 200,000 times. CC3 Operation time of exhaust motor exceeds Even though CC3 is disp
Streszczenie treści zawartej na stronie nr. 7
INSTALLATION INSTALLATION Because your Sharp Commercial Microwave Oven will be used frequently, place it so that there is easy safe access for all users. 1. Be sure all electrical requirements are met. See page EN-5. 2. Remove all packing materials from the oven cavity. Check the unit for any damage, such as a misaligned door, damaged door seals around the door or dents inside the oven cavity or on the door. If there is any damage, please do not operate the oven until it has been checked by
Streszczenie treści zawartej na stronie nr. 8
PART NAMES 14 1 10 9 1 12 2 18 3 4 15 6 5 11 13 17 16 7 8 1. Touch control panels 12. Door handle 2. Door latch openings 13. Service window for replacing the oven light bulb 3. Ceramic shelf 14. Ventilation openings 4. Splash cover 15. Power supply cord 5. Oven light 16. Mounting plate 6. Air intake openings 17. Screw for mounting plate 7. Air intake fi lter 18. Oven ceiling cover 8. Door seals and sealing surfaces 9. Door hinges 10. Oven door with see-through window 11. Door latches 1
Streszczenie treści zawartej na stronie nr. 9
BEFORE OPERATION * Before operating your new oven, make sure you read 3. Cooking stops when the door is opened and cooking and understand this operation manual completely. data remains. However once the door is closed, 1) Plug in the oven. cooking data will be canceled if subsequent keys are * The digital display will then show “ . “ not pressed within 3 minutes. To resume cooking 2) Control panels can only be operated when the door press the START pad. is closed. 4. Cooking is immediately c
Streszczenie treści zawartej na stronie nr. 10
* Memory Cooking can be set in 6 operating ways. 4. Repeat Digit Input/Auto Start ON (without the Start pad) There are multiple methods of selecting memories depending on the input method selected and whether * Suppose you want to cook with memory 12, which or not Auto Start is turned on or off. To avoid was programmed for 10 seconds at 100%. mistakenly selecting the incorrect memory, please Procedure confi rm your settings by checking Custom Help (see Custom Help 1 and 2 on page EN-12). 1
Streszczenie treści zawartej na stronie nr. 11
Procedure Express Defrost with 2 Press the START pad to continue Memory defrosting. START * Suppose you want to cook with memory 0, which was programmed for 10 minutes Express Defrost sequence, Single Digit Input/Auto Start ON. NOTES: 1. Even though CHECK lights up in the display, your oven Procedure continues defrosting and does not stop to check. 2. Press the START pad at step 2 to continue defrosting 1 Place food in oven. as once the door is closed, cooking data will be 0 Enter me
Streszczenie treści zawartej na stronie nr. 12
Procedure Procedure 4 Press the SELECT POWER pad. 2 Enter defrosting time. 3 3 0 SELECT Enter power level for 2nd stage. (Refer to chart below.) 5 POWER 3 Press the START pad. START 5 Press the SELECT TIME pad. SELECT Enter cooking time for 3rd TIME stage. Midway through the defrosting cycle, the CHECK indicator will light in the display and an audible signal will be heard unless signal volume has been 3 0 0 set to Mute. You may open the door, turn food over and shield any warm portio
Streszczenie treści zawartej na stronie nr. 13
PROGRAM & CUSTOMIZE 2. Selecting Auto Start Operation Custom Help Your oven has 2 ways to start memory cooking. CH21 : Auto Start OFF = Factory Setting You can check your oven settings and customize your CH22 : Auto Start ON oven by changing Custom Help settings. The factory setting is Auto Start OFF. Under Auto Start The CUSTOM HELP pad has 11 operations. OFF, cooking will not begin until the START pad is 1. Selecting Memory Input Method pressed. Under Auto Start ON, cooking will automati
Streszczenie treści zawartej na stronie nr. 14
* Suppose you want to set Program Lock ON. 4. Audible Signal Sound Volume Setting The volume of the audible signal can be adjusted to Procedure High, Medium, or Mute. CH41 : High = Factory Setting 1 Press the CUSTOM HELP pad CH42 : Medium CUSTOM x 2 twice within 2 seconds. HELP CH43 : Mute To set cooking completion signal volume 2 Enter 3, 2 for Program Lock 3 2 Press the CUSTOM HELP pad twice within 2 seconds then ON. enter the numbers 4, 1 for High 3 Press the START pad to 4, 2 for Mediu
Streszczenie treści zawartej na stronie nr. 15
To check more than one counter Procedure Display Press each pad as indicated below, after the previous usage is displayed. 0 Total each Input memory number. NO. CHECK memory usage 1 Total manual Press the SELECT TIME 2 Enter memory number. NO. CHECK cooking usage pad. After about 1 sec. (After entering the Total Express Press the EXPRESS memory number, the Defrost usage DEFROST pad. memory setting of each CHECK content is shown for * Suppose you want to know total usage and each 1.5
Streszczenie treści zawartej na stronie nr. 16
To Reset the Counter to “0” Use Custom Help Function for Air Intake Filter Counter to change the Air Intake Filter cycle from 001-999. The Each counter can be manually reset to “0” by pressing factory setting is 100 hours. When 100 hours is exceeded, the START pad after the count is displayed. the FILTER indicator on the display will start to fl ash on * Suppose you want to reset the count for memory and off as a reminder to clean the air fi lter, even if in the number 1 in any Memory Inpu
Streszczenie treści zawartej na stronie nr. 17
Air Filter Cycle 10. Multiplication Factor for Double/Triple Quantity Air Filter Cycle can be changed from the factory setting The multiplication factors of the double and triple of 100 hours to 001-999 hours quantities for memory cooking are preset to 1.80 and 2.60. You can check or change the multiplication * Suppose you want to set the cycle to 250 hours. factors. * Suppose you want to know the multiplication Procedure Display factor for double quantity with memory 1, and change it to 2
Streszczenie treści zawartej na stronie nr. 18
NOTES: * Suppose you want to change the Express Defrost set factory settings to the following: 1. Only Dual Digit Input method can be used when inputting memory numbers in Multiplication Factor for Double/Triple Quantity. Power Defrosting Time Level 2. The multiplication factors can be set from 0.01 to 9.99 for double quantity and triple quantity. STAGE 1 T x 0.30 + 10 sec. 50% 3. When you want to know the multiplication factor for triple quantity, press the DOUBLE/TRIPLE QUANTITY STAGE
Streszczenie treści zawartej na stronie nr. 19
Procedure Display Saving Memories 5 Press the SELECT TIME * Memory 0 - 9 are programmed as factory settings. SELECT pad and enter desired See the table of Programmed Memories on page TIME DEF. multiplication for A2 at EN-8. Stage 2. * Memories must be programmed before memory 1 (Ex: Enter 1, 5 for 0.15.) cooking can be used. DEF. Memory banks 5 Dual Digit: Memory 0-99 DEF. Single Digit: Memory 0-9 Repeat Digit Input: Memory 0-29 6 Press the SELECT TIME Max. cooking stages: 4 stages
Streszczenie treści zawartej na stronie nr. 20
NOTES: 1. Press the SET MEMORY pad twice within 2 seconds. * Suppose you want to set 4 minutes at 60% with 2. If the cooking time is over the maximum time, the memory 1 and 2 minutes at 30% with memory 2. display will show error code EE9. To clear the error code, press the STOP/CLEAR pad and re-program. Procedure Display See Maximum Cooking Time on page EN-22. 3. It is not necessary to press the SELECT POWER pad for 100% in Single Stage. SET X 2 MEMORY
