Streszczenie treści zawartej na stronie nr. 1
INSTRUCTION MANUAL
144/440 MHz FM DUAL BANDER
TH-D7A
144/430 MHz FM DUAL BANDER
TH-D7E
STA CON PACKET96BCONDUP
9
5 7
KENWOOD CORPORATION
B62-1004-00 (K,E) (A)
09 08 07 06 05 04 03 02 01 00
TH-D7 E 00 Cover 1 98.12.4, 0:09 PM
Streszczenie treści zawartej na stronie nr. 2
THANK YOU! FEATURES We are grateful you decided to purchase this This transceiver has the following main features. KENWOOD FM Dual Bander. KENWOOD always • Has a built-in TNC which conforms to the AX.25 provides Amateur Radio products which surprise and protocol. With a portable computer, allows you to excite serious hobbyists. This transceiver is no enjoy Packet operation quite easily. exception. This time KENWOOD presents a handheld • Includes a program for dealing with data formats with a
Streszczenie treści zawartej na stronie nr. 3
NOTICES TO THE USER PRECAUTIONS ATTENTION (U.S.A. Only) Please observe the following precautions to prevent Nickel-Cadmium batteries must be replaced or fire, personal injury, or transceiver damage: disposed of properly. State laws may vary regarding the handling and • Do not transmit with high output power for disposal of Nickel-Cadmium batteries. extended periods. The transceiver may overheat. Please contact your authorized KENWOOD dealer for more information. • Do not modify this transceiver
Streszczenie treści zawartej na stronie nr. 4
CONTENTS SUPPLIED ACCESSORIES ...................................... 1 CHAPTER 5 MENU SET-UP CONVENTIONS FOLLOWED IN THIS MANUAL....... 1 MENU ACCESS ...................................................... 16 CHAPTER 1 PREPARATION MENU CONFIGURATION ....................................... 17 INSTALLING THE NiCd BATTERY PACK .................. 2 CHAPTER 6 OPERATING THROUGH REPEATERS CHARGING THE NiCd BATTERY PACK ................... 2 PROGRAMMING OFFSET ...................................... 21 Se
Streszczenie treści zawartej na stronie nr. 5
CHAPTER 8 SCAN CHAPTER 12 AUXILIARY FUNCTIONS 1 SELECTING SCAN RESUME METHOD ................. 34 DIRECT FREQUENCY ENTRY ............................... 45 2 VFO SCAN .............................................................. 35 CHANGING FREQUENCY STEP SIZE ................... 46 3 MEMORY SCAN...................................................... 35 PROGRAMMABLE VFO .......................................... 46 4 Locking Out a Memory Channel .......................... 36 TONE ALERT .........
Streszczenie treści zawartej na stronie nr. 6
CHAPTER 15 SLOW-SCAN TELEVISION (SSTV) WITH CHAPTER 18 WIRELESS REMOTE CONTROL VC-H1 (TH-D7A ONLY) ENTERING CALL SIGN/ MESSAGE/ RSV .............. 58 PREPARATION ....................................................... 81 SELECTING COLOR FOR CALL SIGN/ CONTROL OPERATION.......................................... 82 MESSAGE/ RSV ..................................................... 59 CHAPTER 19 SKY COMMAND 2 2 2 2 2 (TH-D7A ONLY) EXECUTING SUPERIMPOSITION .......................... 59 CONNECTING T
Streszczenie treści zawartej na stronie nr. 7
SUPPLIED ACCESSORIES CONVENTIONS FOLLOWED IN THIS MANUAL The writing conventions described below have been Accessory Part Number Quantity followed to simplify instructions and avoid unnecessary repetition. AX ntenna T1 90-0634-X NiCd battery pack Instruction What to Do 1 For TH-D7A W09-0911-XX 1 2 Press [KEY].e Press and releas KEY. For TH-D7E W09-0909-XX Battery charger Press Press and hold KEY for For TH-D7A W08-0437-XX 1 [KEY] (1 s). 1 second or longer. For TH-D7E W08-0440-XX Press KEY1 momen
Streszczenie treści zawartej na stronie nr. 8
PREPARATION 1 INSTALLING THE NiCd BATTERY PACK CHARGING THE NiCd BATTERY PACK 2 1 Position the two grooves on the inside bottom corners After installing the NiCd battery pack, charge the battery 3 of the battery pack over the corresponding guides on pack. The battery pack is provided uncharged. 4 the back of the transceiver. 1 Confirm that the transceiver power is OFF. 5 • While charging the battery pack, leave the transceiver 6 power OFF. 7 2 Insert the DC plug from the charger into the DC IN
Streszczenie treści zawartej na stronie nr. 9
The following table shows the approximate battery life INSTALLING THE HAND STRAP/ BELT HOOK (hours) relative to the transmit output power. If desired, attach the provided hand strap and/ or belt 1 hook. VHF Band UHF Band 2 Batteries Belt hook H L EL H L EL 3 Hand strap 4 PB-39 NiCd 369369 5 P5 B-38 NiCd 47 . 14 0 70 1 6 Note: 7 Charge the NiCd battery pack within an ambient temperature of between 5°C and 40°C (41°F and 104°F). Charging outside this 8 To remove the belt hook, pull the belt hook
Streszczenie treści zawartej na stronie nr. 10
4 To install the battery case onto (or remove from) the INSTALLING ALKALINE BATTERIES transceiver, follow steps 1 to 3 for INSTALLING THE With an optional BT-11 battery case, you can use NiCd BATTERY PACK {page 2}. 1 commercially available alkaline batteries in such 2 occasions as camping or emergency operations. 3 Do not install the batteries in a hazardous environment where 1 To open the battery case cover, push on the locking sparks could cause an explosion. 4 tab, then pull the cover. Never
Streszczenie treści zawartej na stronie nr. 11
CONNECTING WITH A REGULATED POWER SUPPLY CONNECTING WITH A CIGARETTE LIGHTER SOCKET To connect the transceiver with an appropriate regulated To connect the transceiver with the cigarette lighter 1 power supply, use an optional PG-2W DC cable. socket in your vehicle, use an optional PG-3J Cigarette 2 Lighter cable. 1 Confirm that the power switches of both the 3 transceiver and power supply are OFF. DC IN jack To cigarette 4 2 Connect the optional PG-2W DC cable to the power lighter 5 supply; red
Streszczenie treści zawartej na stronie nr. 12
FIRST QSO 1 The 7 steps given here will get you on the air in your first 2 4 QSO right away. So, you can enjoy the exhilaration that Press [UP]/ [DWN] or 3 comes with opening a brand new transceiver. turn the Tuning control to select a frequency. 4 1 5 Press the POWER 6 switch for 1 second or longer. 7 5 8 Press and hold the 9 PTT switch, then speak into the microphone in 10 a normal tone of voice. 2 11 Turn the VOL control 12 clockwise to the 11 o’clock position. 13 6 14 Release the PTT switch
Streszczenie treści zawartej na stronie nr. 13
OPERATING BASICS 1 SWITCHING POWER ON/OFF SELECTING A BAND 2 1 Press the POWER switch (1 s) to switch ON the Press [A/B] to select band A or B. 3 transceiver. • The cursor indicates the current band. 4 • A double beep sounds. 5 6 7 8 9 SELECTING A FREQUENCY 10 2 To switch OFF the transceiver, press the POWER switch (1 s) again. 11 Press [UP]/ [DWN] or turn the Tuning control to select a frequency. 12 13 ADJUSTING VOLUME 14 Turn the VOL control clockwise to increase the audio 15 level and counter
Streszczenie treści zawartej na stronie nr. 14
1 Press [F], [MONI]. ADJUSTING SQUELCH • The SQL meter indicates the current squelch level. The Selecting the correct squelch level relieves you from 1 default is level 2; 4 segments are visible. listening to background noise output from the speaker 2 when no signals are present. The appropriate squelch 3 level depends on ambient noise conditions. You can program a different level for band A and B. 4 5 6 2 Press [UP]/ [DWN] to select from 6 squelch levels. 7 • Select the level at which the ba
Streszczenie treści zawartej na stronie nr. 15
TRANSMITTING 1 To transmit, press and hold the PTT switch and speak The recommended duty cycle is 1 minute of transmission and 1 3 minutes of reception. Extended transmissions in the high into the microphone in a normal tone of voice. 2 power mode may cause the back of the transceiver to get hot. • Indicator A or B lights red depending on which band you Transmitting with the supplied antenna near other electronic 3 have selected. equipment can interfere with that equipment. Also, transmitting
Streszczenie treści zawartej na stronie nr. 16
GETTING ACQUAINTED 1 ORIENTATION 2 3 4 5 6 7 8 Antenna TX/RX indicator 9 10 11 Tuning control 12 VOL control 13 14 SP jack Display PTT switch 15 MIC jack POWER 16 switch PC jack 17 LAMP key GPS jack Speaker/ 18 MONI key Microphone Cursor 19 keys 20 21 Keypad 22 DC IN jack 23 10 TH-D7 E 10 Getting Acquainted 10 98.12.4, 0:10 PM
Streszczenie treści zawartej na stronie nr. 17
INDICATORS On the upper section of the display you will see various 1 indicators that show what you have selected. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1 18 TH-D7E only 19 9 5 7 20 Shows the strength of received signals. While 21 transmitting, shows the current relative battery charge. 22 Note: Electromagnetic fields, such as those produced by static electricity, may occasionally cause the display to function abnormally. 23 However, the display will typically return to normal operation with
Streszczenie treści zawartej na stronie nr. 18
CURSOR KEYS BAND A & B This transceiver employs 4 cursor keys so that you can In this manual, bands recalled beside “ ” and “ ” are 1 program most of the functions with only one hand. referred to as band A and band B. The band A default is 2 VHF (144 MHz) and the band B default is UHF. In band 3 A you can also recall a 118 MHz sub-band (TH-D7A only). In band B you can also recall a VHF (144 MHz) 4 sub-band. 5 This transceiver is capable of simultaneously receiving 6 on 2 bands (A and B). So,
Streszczenie treści zawartej na stronie nr. 19
Function Select mode BASIC TRANSCEIVER MODES Press [F] to select. In this mode you can scroll F–1 This section introduces you to the basic modes you can 1 through F–8 (except F–6) by pressing [UP]/ [DWN]; to select on this transceiver. 2 access F–6, first select the 118 MHz band {page 51}. VFO mode After accessing the desired function, press [OK], then 3 press [UP]/ [DWN] to select the desired parameter. Press [VFO] to select. In this mode you can change the 4 Last, press [OK] again to complet
Streszczenie treści zawartej na stronie nr. 20
Full Duplex mode Press [DUP] to select. In this mode the transceiver is 1 capable of simultaneously transmitting and receiving 2 signals. So, it is possible to transmit audio on the current band while receiving packet data on another 3 band. For further information, refer to “FULL DUPLEX” 4 {page 55}. 5 6 7 8 9 10 Packet mode 11 Press [TNC] twice to select. In this mode, you can send commands to the built-in TNC from a personal computer 12 {page 54}. 13 14 15 16 17 18 19 20 21 22 23 14 TH-D7
