Streszczenie treści zawartej na stronie nr. 1
INSTRUCTION MANUAL
VHF TRANSCEIVER
iF3022T/S
The photo shows the 10-key
version transceiver.
Streszczenie treści zawartej na stronie nr. 2
IMPORTANT PRECAUTIONS READ ALL INSTRUCTIONS carefully and com- RCAUTION! NEVER hold the transceiver so that the pletely before using the transceiver. antenna is very close to, or touching exposed parts of the body, especially the face or eyes, while transmitting. The SAVE THIS INSTRUCTION MANUAL— This transceiver will perform best if the microphone is 5 to 10 cm instruction manual contains important operating instructions away from the lips and the transceiver is vertical. for the IC-F3022T/S VH
Streszczenie treści zawartej na stronie nr. 3
DO NOT modify the transceiver for any reason. KEEP the transceiver from the heavy rain, and Never immerse it in the water. The transceiver construction is water resistant, not waterproof. The use of non-Icom battery packs/chargers may impair transceiver performance and invalidate the warranty. ii
Streszczenie treści zawartej na stronie nr. 4
TABLE OF CONTENTS IMPORTANT ........................................................................ i 6 OPTIONAL SWIVEL BELT CLIP .......................... 22–23 EXPLICIT DEFINITIONS ..................................................... i MB-93 contents ........................................................ 22 PRECAUTIONS ................................................................... i Attaching .................................................................. 22 TABLE OF CONTENTS .
Streszczenie treści zawartej na stronie nr. 5
ACCESSORIES 1 Supplied accessories Accessory attachments 1 DFlexible antenna Flexible antenna Battery pack Belt clip Connect the supplied flexible antenna to the antenna connector. CAUTION! • NEVER HOLD the antenna when carrying the transceiver. • Transmitting without an antenna may damage the transceiver. Jack cover Unit cover (with screws) (double-sided tape)* *Use the unit cover as a spare. Ask your dealer for details. 1
Streszczenie treści zawartej na stronie nr. 6
1 ACCESSORIES ïBattery pack DBelt clip To attach the battery pack: To attach the belt clip: Slide the battery pack in the direction of the arrow (q), then q Release the battery pack if it is attached. lock it with the battery release button. w Slide the belt clip in the direction of the arrow until the belt • Slide the battery pack until the battery release button makes a ‘click’ clip is locked and makes a ‘click’ sound. sound. To release the battery pack: Slide the battery release button in the
Streszczenie treści zawartej na stronie nr. 7
ACCESSORIES 1 ïJack cover 1 Attach the jack cover when the optional speaker-microphone or headset is not used. To detach the jack cover: To attach the jack cover: q Unscrew the screws using a phillips screwdriver. q Attach the jack cover to the [MIC/SP] jack. w Detach the jack cover for the speaker-microphone or w Tighten the screws. headset connection. [MIC/SP] jack q q w w q Jack cover CAUTION! Attach the jack cover when the optional speaker-micro- phone or headset is not used. 3
Streszczenie treści zawartej na stronie nr. 8
PANEL DESCRIPTION 2 Front panel e DEALER-PROGRAMMABLE KEY [Side1] ! Desired function can be programmed by your dealer. (p. 7) q r PTT SWITCH [PTT] w Push and hold to transmit; release to receive. o e t DEALER-PROGRAMMABLE KEYS [Side2]/[Side3] Desired functions can be programmed independently by Speaker r your dealer. (p. 7) Microphone y 10-KEYPAD (Depending on version) i t The keypad allows you to enter digits to: u • Select memory channels y • Select tone channels • Select DTMF codes (during
Streszczenie treści zawartej na stronie nr. 9
PANEL DESCRIPTION 2 2 o EXTERNAL MICROPHONE/SPEAKER JACK Connect an optional speaker-microphone or headset. NOTE: Connect or disconnect the optional equipment after the transceiver is turned OFF. Jack cover NOTE: Attach the jack cover when the optional equipment is not used. See (p. 3) for details. ! VOLUME CONTROL [VOL] Rotate to turn the power ON/OFF and adjusts the audio level. 5 0
Streszczenie treści zawartej na stronie nr. 10
2 PANEL DESCRIPTION Function display y SCRAMBLER INDICATOR q w e r t y u i Appears when the voice scrambler function is activated. u BELL INDICATOR o Appears/blinks when the specific 5-tone code is received, according to the pre-programming. ! i KEY LOCK INDICATOR Appears during the key lock function is ON. o BATTERY INDICATOR q TRANSMIT INDICATOR Appears or blinks when the battery power decreases to a Appears while transmitting. specified level. w BUSY INDICATOR ! ALPHANUMERIC DISPLAY Appears w
Streszczenie treści zawartej na stronie nr. 11
PANEL DESCRIPTION 2 Programmable function keys 2 The following functions can be assigned to [Emer], [Side1], SCAN A KEY [Side2], [Side3], [P0], [P1], [P2] and [P3] programmable ➥ This key’s operation depends on the Power ON Scan set- function keys. ting. Consult your Icom dealer or system operator for details con- When the power ON scan function is turned OFF; cerning your transceivers programming. Push to start and cancel scanning operation. In case of If the programmable function names are b
Streszczenie treści zawartej na stronie nr. 12
2 PANEL DESCRIPTION PRIO A/B KEYS TALK AROUND KEY ➥Push to select Priority A or Priority B channel. Push to turn the talk around function ON and OFF. •The talk around function equalizes the transmit frequency to the ➥Push and hold [Prio A (Rewrite)] or [Prio B (Rewrite)] for 1 receive frequency for transceiver-to-transceiver communication. sec. to reassign the operating channel to Priority A or Priority B channel. WIDE/NARROW KEY Push to toggle the IF bandwidth between wide and narrow. MR-CH 1/2
Streszczenie treści zawartej na stronie nr. 13
PANEL DESCRIPTION 2 SURVEILLANCE KEY ID-MR SELECT KEYS Push to turn the surveillance function ON or OFF. ➥Recalls detected ID codes. •Push this key, then select the ID code using [CH Up]/[CH Down]. When this function is turned ON, the beep is not emitted and 2 •Up to 5 ID’s are memorized. the LCD backlight does not light when a signal is received or ➥Push and hold for 1 sec. to erase the selected ID’s. a key is pushed, etc. SCRAMBLER FUNCTION SIREN KEY Push to toggle the voice scrambler function
Streszczenie treści zawartej na stronie nr. 14
BASIC OPERATION 3 Turning power ON Prior to using the transceiver for the first time, the battery DBattery type selection pack must be fully charged for optimum life and operation. The battery type must be selected according to the attaching (p. 16) battery type when turning the transceiver ON. Ask your dealer for details. q Rotate [VOL] to turn the power ON. w If the transceiver is programmed for a start up password, q Turn the power OFF. input the digit codes as directed by your dealer. w Whi
Streszczenie treści zawartej na stronie nr. 15
BASIC OPERATION 3 Channel selection Call procedure Several types of channel selections are available. Methods When your system employs tone signaling (excluding CTCSS may differ according to your system set up. and DTCS), the call procedure may be necessary prior to voice 3 transmission. The tone signaling employed may be a selective NON-ZONE TYPE: calling system which allows you to call specific station(s) only Push [CH Up] or [CH Down] to select the desired operating and prevent unwanted st
Streszczenie treści zawartej na stronie nr. 16
3 BASIC OPERATION Receiving and transmitting NOTE: Transmitting without an antenna may damage the DTransmitting notes transceiver. See (p. 1) for accessory attachments. • Transmit inhibit function The transceiver has several inhibit functions which restrict Receiving: transmission under the following conditions: q Rotate [VOL] to turn the power ON. - The channel is in mute condition (‘Inaudible’ condition; w Push [CH Up] or [CH Down] to select the conventional sys- “ ” does not appear.) tem c
Streszczenie treści zawartej na stronie nr. 17
BASIC OPERATION 3 DTX code channel selection DTX code number edit If the transceiver has [TX Code CH Select] assigned to it, the If the transceiver has [TX Code CH Select] or [TX Code 3 indication can be switched between the operating channel Enter] assigned to it, TX code contents can be edited within number (or name) and TX code channel number (or name). the allowable digits. When the TX code channel number (or name) is displayed, [CH Up] or [CH Down] selects the TX code channel. USING [TX COD
Streszczenie treści zawartej na stronie nr. 18
3 BASIC OPERATION USING [TX CODE ENTER] KEY: User set mode q Select the desired TX code channel via [TX Code CH Select]+[CH Up] or [CH Down], [TX Code CH Up] or [TX User set mode is accessed at power ON and allows you to Code CH Down]. (p. 13) set seldom-changed settings. In this case you can “cus- w Push [TX Code Enter] to enter the TX code edit mode. tomize” the transceiver operation to suit your preferences and e Push [TX Code Enter] several times to select the desired operating style. digi
Streszczenie treści zawartej na stronie nr. 19
BASIC OPERATION 3 Emergency transmission Stun function When [Emergency Single] or [Emergency Repeat] is pushed, When the specified ID, set as a killer ID, is received, the stun an emergency signal is automatically transmitted for the spec- function is activated. 3 ified time period. When the killer ID is received, the transceiver switches to the When [Emergency] is pushed, the DTMF emergency signal password required condition. Entering of the password via the is transmitted on the priority cha
Streszczenie treści zawartej na stronie nr. 20
BATTERY CHARGING 4 Caution R DANGER! NEVER use or leave battery packs in areas Misuse of Lithium-ion batteries may result in the follow- with temperatures above +60˚C. High temperature buildup in ing hazards: smoke, fire, or the battery may rupture. the battery, such as could occur near fires or stoves, inside a Misuse can also cause damage to the battery or degra- sun heated car, or in direct sunlight may cause the battery to dation of battery performance. rupture or catch fire. Excessive tempe
