Streszczenie treści zawartej na stronie nr. 1
485114 (1) 7/7/04 12:02 pm Page 1.1
Harrier 48
CODE
485A
Blade Brake Clutch - Autodrive
OWNER'S HANDBOOK
(English Version)
FROM SERIAL NO: 485A001001 HANDBOOK: 485114(REV .1.)
ISSUE 10.05.04
Streszczenie treści zawartej na stronie nr. 2
485114 (1) 7/7/04 12:02 pm Page 1.2 MAIN FEATURES /SPECIFICATIONS Main Features 1. Spark Plug Lead 2. Air Cleaner Cover 11 3. Engine Cover 12 4. Fuel Cap 10 5. Serial Number Label 9 6. Oil Filler Cap & Dipstick 13 7. Rear Deflector 8. Engine Start Grip 9. Throttle Control 8 10. Cutterblade Stop Lever 11. Handlebar 12. Ground Drive Clutch Lever 13. Blade Brake Clutch Lever 7 14 14. Grassbag Assembly 6 15. Handlebar Securing Knobs 5 4 16. Handlebar Height Adjust Knob 3 15 17.
Streszczenie treści zawartej na stronie nr. 3
485114 (1) 7/7/04 12:02 pm Page 1.3 1ST Year (12 months) 1ST Year (12 months) Owner’s Name: We certify that this service has been carried out by an Authorised Hayter Serial Number: Service Dealer Date: Date: Note for dealer: Please retain this voucher for your records. 2nd Year (24 months) 2nd Year (24 months) Owner’s Name: We certify that this service has been carried out by an Authorised Hayter Serial Number: Service Dealer Date: Date: Note for dealer: Please retain this voucher for your
Streszczenie treści zawartej na stronie nr. 4
485114 (1) 7/7/04 12:02 pm Page 1.4
Streszczenie treści zawartej na stronie nr. 5
485114 (1) 7/7/04 12:02 pm Page 1.5 CONTENTS 1.3 Main Features/Specifications 1.5 Contents 1.20 Maintenance Schedule 1.6 Introduction 1.21 - 1.27 Mower Maintenance 1.21 - Engine 1.7 Warranty 1.21 - Throttle Cable Adjustment 1.21 - Carburettor Adjustments 1.8 - 1.11 Safety Precautions 1.22 - Oil Service 1.22 - Air Cleaner Service 1.11 Safety Symbols 1.23 - Spark Plug Service 1.11 Decal Symbols 1.23 - Keeping Engine Clean 1.23 - Grassbag 1.12 Assembling the Mower 1.24 - Deck Housing 1.12 -
Streszczenie treści zawartej na stronie nr. 6
485114 (1) 7/7/04 12:02 pm Page 1.6 INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you gain safe and efficient service from your mower. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety, operation, maintenance and specifications. Read and understand this handbook prior to operating your mower for the first time. Make sure you are familiar with all the controls and
Streszczenie treści zawartej na stronie nr. 7
485114 (1) 7/7/04 12:02 pm Page 1.7 WARRANTY LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / transaxle (where applicable) furnish their own warranty and services are provided through their authorised network. To qualify for the full benefit of th
Streszczenie treści zawartej na stronie nr. 8
485114 (1) 7/7/04 12:02 pm Page 1.8 SAFETY PRECAUTIONS Safety Alert Symbol This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury. Carefully read the following and inform others. Your mower is perfectly safe if used correctly. Failure to observe the following precautions may result in serious injury. Training Before using the mower read the owners handbook carefully. Pay par- ticular attention to the safety precautions. En
Streszczenie treści zawartej na stronie nr. 9
485114 (1) 7/7/04 12:02 pm Page 1.9 SAFETY PRECAUTIONS Preparation - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely. A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition. A damaged cutterblade must be replaced immedi- ately with a genuine Hayter replacement part Operation Do not operate the engine in a confin
Streszczenie treści zawartej na stronie nr. 10
485114 (1) 7/7/04 12:02 pm Page 1.10 SAFETY PRECAUTIONS Operation Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift the rear deflector while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot. Stop the engine and disconnect the spark plug lead: - Before clearing blockages or unclogging the discharge chute. - Before clean
Streszczenie treści zawartej na stronie nr. 11
485114 (1) 7/7/04 12:02 pm Page 1.11 SAFETY PRECAUTIONS Maintenance & Storage Allow the engine to cool before storing in any enclosure. To reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease. Check the rear deflector and grassbag frequently for wear or deterioration. Replace worn or damaged parts for safety. If the fuel tank has to be drained, this should be done outdoors and when the engine is cool. Wear strong work gloves when rem
Streszczenie treści zawartej na stronie nr. 12
485114 (1) 7/7/04 12:02 pm Page 1.12 ASSEMBLING THE MOWER Delivery Checklist Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer. 1. Engine Handbook. 2. Grassbag. To prevent accidents cut off the long ribbon attached to the grass- bag and discard. Handlebar Unscrew the handlebar securing knobs sufficiently to allow the handle- bar to pivot. Hold the engine stop lever in towards the han
Streszczenie treści zawartej na stronie nr. 13
485114 (1) 7/7/04 12:02 pm Page 1.13 MOWER BEFORE STARTING THE Prevent Engine Damage To prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol before starting the engine. Oil Type Always use high quality detergent oil classified “For service SE, SF, SG” SAE 30 oil. Never use additives with recommended oils. SAE 10W-30 multigrade oil may be used, but this will result in higher engine operating temperatures with c
Streszczenie treści zawartej na stronie nr. 14
485114 (1) 7/7/04 12:02 pm Page 1.14 OPERATING THE MOWER Controls Operate all control levers several times and ensure that the cables move freely. Check that the cutterblade stop and ground drive clutch levers return freely to their rest position when released. Whilst operating the engine throttle mechanism slight resistance should be felt when moving the lever to the ‘choke’ position. Starting - Step 1 Move the throttle control lever to the ‘choke’ position before start- ing a cold engine. M
Streszczenie treści zawartej na stronie nr. 15
485114 (1) 7/7/04 12:02 pm Page 1.15 OPERATING THE MOWER Step 4 To engage the cutterblade hold the cutterblade stop lever against the handlebar with your right hand and with your left hand push the blade brake clutch lever forwards to engage. Release the blade brake clutch lever and it will return to its rest position. Forward Travel Hold the handlebar and operate the ground drive clutch lever to power the mower in a forward direction. When the ground drive clutch lever is disengaged the mow
Streszczenie treści zawartej na stronie nr. 16
485114 (1) 7/7/04 12:02 pm Page 1.16 OPERATING THE MOWER Slopes To prevent engine damage do not use the mower on slopes greater than 20 degrees. Height of Cut + Move the height of cut lever sideways to disengage it from the locking notch, then push forwards to lower or pull backwards to raise the height - of cut. Release the lever in the required position and ensure that it locks firmly into one of the seven notch settings. Always select a height of cut to suit operating conditions. Prevent e
Streszczenie treści zawartej na stronie nr. 17
485114 (1) 7/7/04 12:02 pm Page 1.17 OPERATING THE MOWER Without Grass Collection Remove the grassbag and operate the mower with the rear deflector in the closed position. Heavy Growth Areas of heavy growth should be mown without collecting the clip- pings. If collection is required, first mow the area without the grass- bag at the maximum height of cut setting. Allow the grass clippings to dry out and then mow the area at the maximum height of cut setting with the grassbag fitted. Reduce
Streszczenie treści zawartej na stronie nr. 18
485114 (1) 7/7/04 12:02 pm Page 1.18 LAWN CARE CALENDAR To be used as a guide only. January There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. February Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary. March The yearly lawn work programme really starts this month. As soon as the ground conditions are suitable, the first cut can be made. The fi
Streszczenie treści zawartej na stronie nr. 19
485114 (1) 7/7/04 12:02 pm Page 1.19 LAWN CARE CALENDAR August Keep mowing regularly and watering as necessary. Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. September Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow. October Rake out the thatch from the turf and spike the lawn to assist in drainage. Brush in peat and sharp san
Streszczenie treści zawartej na stronie nr. 20
485114 (1) 7/7/04 12:02 pm Page 1.20 MAINTENANCE SCHEDULE To prevent accidents stop the engine disconnect the spark plug lead before attempting to carry out maintenance procedures on the mower. Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty, dry conditions, or when airborne debris is present or after extensive operation cutting tall, dry grass. First 5Hrs After the very first five hours cha
