Streszczenie treści zawartej na stronie nr. 1
OPERATOR’S
MANUAL
IS2000Z Series
Zero-Turn Riding Mower
Model Number: Description
5900619 IS2000ZKAV2561, 25HP, 61” Cut Zero-Turn Riding Mower
5901170 IS2000ZK2761, 27HP, 61” Cut Zero-Turn Riding Mower
5900624 IS2000ZKAV2552, 25HP, 52” Cut Zero-Turn Riding Mower
5900625 IS2000ZK2752, 27HP, 52” Cut Zero-Turn Riding Mower
5900629 IS2000ZLKAV2661, 26HP, 61” Cut Zero-Turn Riding Mower
5900670 IS2000ZB3061, 30HP, 61” Cut Zero-Turn Riding Mower
Briggs & Stratton Yard Power Products Group
5100758
5375
Streszczenie treści zawartej na stronie nr. 2
Thank you for purchasing this quality-built Ferris product. We’re pleased that you’ve placed your confidence in the Ferris brand. When operated and maintained according to the instructions in this manual, your Ferris product will provide many years of dependable service. This manual contains safety information to make you aware of the hazards and risks associated with this machine and how to avoid them. This machine is designed and intended to be used and maintained according to the manual and o
Streszczenie treści zawartej na stronie nr. 3
Operation Maintenance Troubleshooting Specifications Safety Controls Table of Contents Operator Safety ...................................................2 Identification Numbers ..........................................11 Safety Decals........................................................12 Safety Interlock System ........................................13 Features & Controls..........................................14 Control Functions..................................................14 Con
Streszczenie treści zawartej na stronie nr. 4
Operator Safety Operating Safety Congratulations on purchasing a superior-quality piece of lawn and garden equipment. Our products are designed and manufactured to meet or exceed all industry standards for safety. Do not operate this machine unless you have been trained. Reading and understanding this operator’s manual is a way to train yourself. Power equipment is only as safe as the operator. If it is misused, or not properly maintained, it can be dangerous! Remember, you are responsible for
Streszczenie treści zawartej na stronie nr. 5
Safety Operator Safety Slope Operation Operation on slopes can be dangerous. Using the unit on a slope that is too steep where you do not have adequate wheel traction (and control) can cause sliding, loss of steering, control, and possible rollover. You should not operate on a slope greater than a 3.5 foot rise over a 20 foot length (10 degrees). Always mow across slopes, not up and down (to maintain traction on the wheels) and avoid sudden turns or rapid speed changes. Reduce speed and use extr
Streszczenie treści zawartej na stronie nr. 6
Operator Safety Roll Bar Use Keep the roll bar in the raised position and fasten the seat belt. There is no roll over protection when the roll bar is down! Do not jump off if the mower tips (it is safer to be secured by the seat belt with the roll bar raised.) Lower the roll bar only when necessary (such as to temporarily clear a low overhanging obstacle) and NEVER remove it. Do NOT use the seat belt when the roll bar is down. Raise the roll bar as soon as clearance permits. Retaining Walls, Dro
Streszczenie treści zawartej na stronie nr. 7
Safety Operator Safety Fuel and Maintenance Always disengage all drives, shutoff the engine, and remove the key before doing any cleaning, refueling, or servicing. Gasoline and its vapors are extremely flammable. Do not smoke while operating or refueling. Do not add fuel while engine is hot or running. Allow engine to cool for at least 3 minutes prior to adding fuel. Do not add fuel indoors, in an enclosed trailer, garage, or any other enclosed area that is not well ventilated. Gasoline spills s
Streszczenie treści zawartej na stronie nr. 8
Operator Safety Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. This mowing deck is capable of amputating hands and feet and throwing objects. The triangle in text signifies important cautions or warnings which must be followed. 2. Mow only in the daylight or with good artificial TRAINING light, keeping away from holes and hidden
Streszczenie treści zawartej na stronie nr. 9
Safety Operator Safety 23. Use care when approaching blind corners, shrubs, Do Not trees or other objects that may obscure vision. 1. Avoid starting, stopping, or turning on a slope. If 24. To reduce fire hazard, keep unit free of grass, tires lose traction (i.e. machine stops forward leaves & excess oil. Do not stop or park over dry motion on a slope), disengage the blade(s) (PTO) leaves, grass or combustible materials. and drive slow off the slope. 25. The engine in this unit is not factory eq
Streszczenie treści zawartej na stronie nr. 10
Operator Safety mufflers, and engine to prevent fires. Clean up oil SERVICE AND MAINTENANCE or fuel spillage. To avoid personal injury or property damage, use 10. Let engine cool before storing and do not store extreme care in handling gasoline. Gasoline is near flame. extremely flammable and the vapors are explosive. 11. Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting. Safe Handling of Gasoline 12. Park machine on level ground. Never allow 1. Exti
Streszczenie treści zawartej na stronie nr. 11
Safety Operator Safety 27. Models equipped with an engine radiator: Never alter the ROLL BAR by welding anything to WARNING: Stored energy device. To prevent it or by drilling additional holes. serious bodily injury from hot coolant or steam BEFORE FIRST TIME USE - Inspect the ROLL blow-out, never attempt to remove the radiator cap BAR structure and mounting hardware for: while the engine is running. Stop the engine and 1) Check to make sure the machine GVW (Gross wait until it is cool. Even
Streszczenie treści zawartej na stronie nr. 12
Operator Safety INSPECT BUCKLE WARNING & LATCH Failure to properly inspect and maintain the seat belt can cause serious injury or death. INSPECTION AND MAINTENANCE OF THE ROLL BAR SEAT BELT The seat belt like the ROLL BAR, needs to be periodically inspected to verify that the integrity has not been compromised through normal machine use, misuse, age degradation, modifications, or a roll over. If the seat belt does INSPECT WEBBING not pass all of the following tests, it should be replaced. BE
Streszczenie treści zawartej na stronie nr. 13
Safety S SA AM MP PL LE E Operator Safety Identification Numbers Identification Tag When contacting your authorized dealer for replacement parts, service, or information you MUST have these numbers. Record your part number, serial number and engine serial numbers in the space provided for easy access. These numbers can be found in the locations shown. NOTE: For location of engine identification numbers, refer to the engine owner’s manual. 11
Streszczenie treści zawartej na stronie nr. 14
Operator Safety SAFETY DECALS This unit has been designed and manufactured to provide you with the safety and reliability you would expect from an industry leader in outdoor power 1 equipment manufacturing. Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effectively, we have placed several safety labels on the unit to remind you of this important 2 information while you are operating you
Streszczenie treści zawartej na stronie nr. 15
Safety Operator Safety Safety Icons SAFETY INTERLOCK The alert symbol is used to identity safety information about hazards that can result in personal SYSTEM injury. A signal word (DANGER, WARNING, or CAUTION) is used with the alert symbol to indicate This unit is equipped with safety interlock switches. the likelihood and the potential severity of the injury. These safety systems are present for your safety, do In addition, a hazard icon may be used to represent not attempt to bypass safety swi
Streszczenie treści zawartej na stronie nr. 16
Features & Controls AIR COOLED MODELS ONLY CONTROL FUNCTIONS The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section. Ground Speed Levers Seat Adjustment Lever These levers control the ground speed of the rider. The seat can be adjusted forward and back. Move
Streszczenie treści zawartej na stronie nr. 17
Controls Features & Controls Parking Brake Fuel Tank Cap To remove the cap, turn counterclockwise. DISENGAGE Releases the parking brake. Fuel Level Gauge ENGAGE Locks the parking brake. Displays the fuel level in the tank. Pull the parking brake lever back to engage the parking brake. Move the lever fully forward to disengage the parking brake. NOTE: To start the unit the parking brake must be engaged. PTO (Power Take Off) Switch The PTO switch engages and disengages the mower. Pull UP on the sw
Streszczenie treści zawartej na stronie nr. 18
Features & Controls LIQUID COOLED MODELS ONLY CONTROL FUNCTIONS The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section. Ground Speed Levers Seat Adjustment Lever These levers control the ground speed of the rider. The seat can be adjusted forward and back. Mo
Streszczenie treści zawartej na stronie nr. 19
Controls Features & Controls Fuel Tank Cap Parking Brake To remove the cap, turn counterclockwise. DISENGAGE Releases the parking brake. Fuel Level Gauge ENGAGE Locks the parking brake. Displays the fuel level in the tank. Pull the parking brake lever back to engage the parking brake. Move the lever fully forward to Water Temperature Gauge disengage the parking brake. NOTE: To start the unit Measures the engine coolant temperature. the parking brake must be engaged. PTO (Power Take Off) Switch
Streszczenie treści zawartej na stronie nr. 20
Operation CHECKS BEFORE STARTING GENERAL OPERATING SAFETY Check that crankcase is filled to full mark on Before first time operation: dipstick. See the engine Operator’s Manual for Be sure to read all information in the Safety and instructions and oil recommendations. Operation sections before attempting to operate Make sure all nuts, bolts, screws and pins are in this tractor and mower. place and tight. Become familiar with all of the controls and how to Adjust the seat position, and
