Streszczenie treści zawartej na stronie nr. 1
OWNER'S MANUAL
MODEL NO. SGT18H46C
18.0 HP 46 Inch
Lawn Tractor
For Parts and Service, contact our authorized distributor: call 1-800-849-1297
For Technical Assistance: call 1-800-829-5886
®
178387 4.6.01 TR
PRINTED IN U.S.A.
Streszczenie treści zawartej na stronie nr. 2
SAFETY RULES SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • Avoid starting or stopping on a slope. If tires lose traction, I. GENERAL OPERATION disengage the blades and proceed slowly straight down • Read, understand, and follow all instructions in the manual the slope. and on the machine before starting. • On
Streszczenie treści zawartej na stronie nr. 3
SAFETY RULES Safe Operation Practices for Ride-On Mowers Look for this symbol to point out im- portant safety precautions. It means • Be sure the area is clear of other people before mowing. Stop CAUTION!!! BECOME ALERT!!! YOUR machine if anyone enters the area. SAFETY IS INVOLVED. • Never carry passengers or children even with the blades off. • Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing. CAUTION: In order to prevent acciden- • Ne
Streszczenie treści zawartej na stronie nr. 4
CONGRATULATIONS on your purchase of a new tractor. It PRODUCT SPECIFICATIONS has been designed, engineered and manufactured to give you the best possible dependability and performance. GASOLINE CAPACITY 3.5 GALLONS AND TYPE: UNLEADED REGULAR Should you experience any problem you cannot easily remedy, please contact your nearest authorized service OIL TYPE (API-SF-SJ): SAE 30 (above 32°F) centre/department. We have competent, well-trained tech- SAE 5W-30 (below 32°F) nicians and the proper too
Streszczenie treści zawartej na stronie nr. 5
UNASSEMBLED PARTS Steering Wheel Seat (1) Washer 17/32 x 1-3/16 x 12 Gauge (1) Knob Nose Roller Steering Wheel Insert Gauge Wheels (2) Locknuts (2) Washers 5/16-18 17/32 x 7/8 x 16 Ga. (2) Gauge (2) Washers 3/8 Wheels x 7/8 x 14 Gauge Nose Roller Brackets (2) Hex Bolts (2) Shoulder 5/16-18 x 1 (2) Centerlock Nuts Bolts Mower (1) Oil Drain Tube For Future Use (2) Front Link Assemblies Slope Sheet Key (2) Keys (3) Retainer Springs (double loop) (4) Retainer Springs (single loop
Streszczenie treści zawartej na stronie nr. 6
ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY STEERING WHEEL INSERT A socket wrench set will make assembly easier. Standard wrench sizes are listed. LOCKNUT (2) 9/16" wrench Pliers LARGE (2) 1/2" wrenches
Streszczenie treści zawartej na stronie nr. 7
ASSEMBLY INSTALL SEAT (See Fig. 3) TO ROLL TRACTOR OFF SKID (See Operation section page 11 for location and function of Adjust seat before tightening adjustment knob. controls) • Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat • Press lift lever plunger and raise attachment lift lever to its highest position. to tractor. • Release parking brake by depressing clutch/brake pedal. • Pivot seat upward and remove from the cardboard packing.
Streszczenie treści zawartej na stronie nr. 8
ASSEMBLY • Place the suspension arms on outward pointing deck INSTALL MOWER AND DRIVE BELT pins. If necessary, rock and raise front of mower to align (See Figs. 5 and 6) deck pins with the holes in suspension arms. Retain Be sure tractor is on level surface and mower suspension with double loop retainer springs with loops down as arms are raised with attachment lift control. Engage parking shown. brake. • Connect anti-sway bar to chassis bracket under left • Cut and remove ties securing anti-
Streszczenie treści zawartej na stronie nr. 9
ASSEMBLY CHECK TIRE PRESSURE 3 CHECKLIST The tires on your tractor were overinflated at the factory for BEFORE YOU OPERATE AND ENJOY YOUR NEW TRAC- shipping purposes. Correct tire pressure is important for TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE best cutting performance. BEST PERFORMANCE AND SATISFACTION FROM THIS • Reduce tire pressure to PSI shown in “PRODUCT QUALITY PRODUCT. SPECIFICATIONS” section of this manual. PLEASE REVIEW THE FOLLOWING CHECKLIST: 3 All assembly instructions have b
Streszczenie treści zawartej na stronie nr. 10
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. BATTERY CAUTION OR REVERSE FORWARD FAST SLOW WARNING LIGHTS ON OVER TEMP ENGINE ON ENGINE OFF OIL PRESSURE LIGHT PARKING BRAKE UNLOCKED MOWER LIFT FUEL CHOKE MOWER HEIGHT LOCKED P ATTACHMENT REVERSE NEUTRAL HIGH LOW PARKING BRAKE CLUTCH ENGAGED 15 15 15 KEEP AREA CLEAR SLOPE HAZARDS ATTACHMENT (SEE SAFETY RULES SECTION) CLUTCH DISENGAGED IGNITION FREE WHEEL DANG
Streszczenie treści zawartej na stronie nr. 11
OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. ATTACHMENT LIGHT CLUTCH LEVER IGNITION SWITCH SWITCH POSITION AMMETER CHOKE LIFT LEVER PLUNGER CONTROL ATTACHMENT THROTTLE LIFT LEVER CONTROL CLUTCH/ BRAKE PEDAL FREE WHEEL PARKING CONTROL BRAKE MOTION CONTROL LEVER HEIGHT ADJUSTMENT KN
Streszczenie treści zawartej na stronie nr. 12
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses. IMPORTANT: LEAVING THE IGNITION SWITCH IN ANY HOW TO USE YOUR TRACTOR POSITION OTHER THAN "OFF" WILL CAUSE THE BATTERY TO BE DISCHARGED, (DEAD). TO SET PARKING BRAKE (See
Streszczenie treści zawartej na stronie nr. 13
OPERATION TO OPERATE ON HILLS TO ADJUST GAUGE WHEELS (See Fig. 8) Gauge wheels are properly adjusted when they are slightly CAUTION: Do not drive up or down hills off the ground when mower is at the desired cutting height in with slopes greater than 15° and do not operating position. Gauge wheels then keep the deck in drive across any slope. proper position to help prevent scalping in most terrain conditions. • Choose the slowest speed before starting up or down NOTE:Adjust gauge wheels with
Streszczenie treści zawartej na stronie nr. 14
OPERATION TO START ENGINE (See Fig. 6) BEFORE STARTING THE ENGINE When starting the engine for the first time or if the engine has CHECK ENGINE OIL LEVEL (See Fig. 15) run out of fuel, it will take extra cranking time to move fuel from the tank to the engine. • The engine in your tractor has been shipped, from the • Be sure freewheel control is in the transmission engaged factory, already filled with summer weight oil. position. • Check engine oil with tractor on level ground. • Sit on seat in
Streszczenie treści zawartej na stronie nr. 15
OPERATION MOWING TIPS PURGE TRANSMISSION • Tire chains cannot be used when the mower housing is CAUTION: Never engage or disengage attached to tractor. freewheel lever while the engine is run- • Mower should be properly leveled for best mowing ning. performance. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual. To ensure proper operation and performance, it is recom- • The left hand side of mower should be used for trimming. mended that the transmission be pur
Streszczenie treści zawartej na stronie nr. 16
CUSTOMER RESPONSIBILITIES MAINTENANCE SCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE SERVICE DATES Check Brake Operation Check Tire Pressure Check Operator Presence and Interlock Systems T R Check for Loose Fasteners 7 A Sharpen/Replace Mower Blades 4 C Lubrication Chart T Check Battery Level 6 0 Clean Battery and Terminals R Check Transaxle Cooling Adjust Blade Belt(s) Tension 5 Adjust Motion Drive Belt(s) Tension 5 Check Engine Oil Level Change Engine Oil 1 1,2,3 Clean Air Filter 2 E C
Streszczenie treści zawartej na stronie nr. 17
CUSTOMER RESPONSIBILITIES TRACTOR TRAILING MANDREL EDGE UP ASSEMBLY BLADE Always observe safety rules when performing any mainte- nance. CENTER HOLE BRAKE OPERATION If tractor requires more than six (6) feet stopping distance at BLADE BOLT (SPECIAL) high speed in highest gear, then brake must be adjusted. STAR (See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual). TIRES • Maintain proper air pressure in all tires (See “PRODUCT FIG. 12 SPECIFICATIONS” section of this manua
Streszczenie treści zawartej na stronie nr. 18
CUSTOMER RESPONSIBILITIES Change the oil after every 50 hours of operation or at least TO CLEAN BATTERY AND TERMINALS once a year if the tractor is not used for 50 hours in one year. Corrosion and dirt on the battery and terminals can cause the battery to “leak” power. Check the crankcase oil level before starting the engine and after each eight (8) hours of operation. Tighten oil fill cap/ • Remove terminal guard. dipstick securely each time you check the oil level. • Disconnect BLACK battery
Streszczenie treści zawartej na stronie nr. 19
CUSTOMER RESPONSIBILITIES AIR FILTER CLAMP CLAMP Your engine will not run properly using a dirty air filter. Clean the foam pre-cleaner after every 25 hours of operation or every season. Service paper cartridge every 100 hours of operation or every season, whichever occurs first. Service air cleaner more often under dusty conditions. FUEL FILTER (See engine manual for instructions). FIG. 16 MUFFLER Inspect and replace corroded muffler and spark arrester (if CLEANING equipped) as it could creat
Streszczenie treści zawartej na stronie nr. 20
SERVICE AND ADJUSTMENTS CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: Depress clutch/brake pedal fully and set parking brake. Place motion control lever in neutral (N) position. Place attachment clutch in “DISENGAGED” position. Turn ignition key “OFF” and remove key. Make sure the blades and all moving parts have completely stopped. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. TRACTOR IMPORTANT: IF AN ATTACHMENT OTHER
