Instrukcja obsługi Snapper REAR ENGINE RIDER 281222BE

Instrukcja obsługi dla urządzenia Snapper REAR ENGINE RIDER 281222BE

Urządzenie: Snapper REAR ENGINE RIDER 281222BE
Kategoria: Kosiarka
Producent: Snapper
Rozmiar: 0.86 MB
Data dodania: 10/8/2014
Liczba stron: 38
Drukuj instrukcję

Pobierz

Jak korzystać?

Naszym celem jest zapewnienie Ci jak najszybszego dostępu do treści zawartych w instrukcji obsługi urządzenia Snapper REAR ENGINE RIDER 281222BE. Korzystając z podglądu online możesz szybko przejrzeć spis treści i przejść do strony, na której znajdziesz rozwiązanie swojego problemu z Snapper REAR ENGINE RIDER 281222BE.

Dla Twojej wygody

Jeżeli przeglądanie instrukcji Snapper REAR ENGINE RIDER 281222BE bezpośrednio na tej stornie nie jest dla Ciebie wygodne, możesz skorzystać z dwóch możliwych rozwiązań:

  • Przeglądanie pełnoekranowe - Aby wygodnie przeglądać instrukcję (bez pobierania jej na komputer) możesz wykorzystać tryp przeglądania pełnoekranowego. Aby uruchomić przeglądanie instrukcji Snapper REAR ENGINE RIDER 281222BE na pełnym ekranie, użyj przycisku Pełny ekran.
  • Pobranie na komputer - Możesz również pobrać instrukcję Snapper REAR ENGINE RIDER 281222BE na swój komputer i zachować ją w swoich zbiorach. Jeżeli nie chcesz jednak marnować miejsca na swoim urządzeniu, zawsze możesz pobrać ją w przyszłości z ManualsBase.
Snapper REAR ENGINE RIDER 281222BE Instrukcja obsługi - Online PDF
Advertisement
« Page 1 of 38 »
Advertisement
Wersja drukowana

Wiele osób woli czytać dokumenty nie na ekranie, lecz w wersji drukowanej. Opcja wydruku instrukcji również została przewidziana i możesz z niej skorzystać klikając w link znajdujący się powyżej - Drukuj instrukcję. Nie musisz drukować całej instrukcji Snapper REAR ENGINE RIDER 281222BE a jedynie wybrane strony. Szanuj papier.

Streszczenia

Poniżej znajdziesz zajawki treści znajdujących się na kolejnych stronach instrukcji do Snapper REAR ENGINE RIDER 281222BE. Jeżeli chcesz szybko przejrzeć zawartość stron znajdujących się na kolejnych strinach instrukcji, możesz z nich skorzystać.

Streszczenia treści
Streszczenie treści zawartej na stronie nr. 1

Safety Instructions & Operator’s Manual for
REAR ENGINE RIDING MOWER
SERIES 22

MODELS
281222BE
301222BE
3314522BVE
331522KVE















MODEL NUMBER EXPLANATION

33 15 22 K V E

CUTTING WIDTH ENGINE OPTIONS
ENGINE HP ENGINE TYPE
SERIES DESIGNATION ENGINE MODEL

28 - 28” Cutting Deck 12 - 12.0 HP Engine 22 - Series Designation B - Briggs Engine V - Over Head E - Electric Start
30 - 30” Cutting Deck 145 - 14.5 HP Engine K - Kohler Engine Valve
33 - 33” Cuttin

Streszczenie treści zawartej na stronie nr. 2

IMPORTANT SAFETY INSTRUCTIONS WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of sound mind

Streszczenie treści zawartej na stronie nr. 3

IMPORTANT SAFETY INSTRUCTIONS PREPARATION OPERATION (Continued From Previous Page) (Continued From Previous Column) 7. Keep people and pets out of mowing area. 14. Exercise CAUTION when pulling loads. Limit loads Immediately STOP blades, STOP engine, and to those you can safely control and attach loads to STOP machine if anyone enters the area. hitch plate as specified with SNAPPER attachment 8. Check shields, deflectors, switches, blade instructions. controls and other safety devi

Streszczenie treści zawartej na stronie nr. 4

TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS.......................................................... 2-3 TABLE OF CONTENTS...................................................................................... 4 SECTION 1 - FAMILIARIZATION ....................................................................... 5 SECTION 2 - OPERATING INSTRUCTIONS................................................. 6-12 Pre-start Checklist ..................................................................

Streszczenie treści zawartej na stronie nr. 5

Section 1 - FAMILIARIZATION STEERING WHEEL FUEL TANK ENGINE SPEED CONTROL TRANSMISSION IGNITION SHIFT LEVER SWITCH CLUTCH/BRAKE PEDAL PARK BRAKE LATCH OVERRIDE CONTROL DISCHARGE DEFLECTOR BLADE BLADE LEVER FIGURE 1.1 1.1 INTRODUCTION 1.2 NOMENCLATURE This manual has been prepared for the operator’s of the The nomenclature drawing above, Figure 1.1, shows the SNAPPER Rear Engine Rider. Its purpose, aside from essential parts of the SNAPPER

Streszczenie treści zawartej na stronie nr. 6

Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the following checks and perform the service 2.2 OPERATOR’S SEAT ADJUSTMENT required before each start-up. 2.2.1. FRONT TO REAR ADJUSTMENT 2.1.1. Check tires and add or release air as needed 1. With the engine stopped, loosen the two adjusting to bring pressure to 12 psi in front and 12 psi in rear knobs and move seat to desired position. After tires. adjustment, tighten knobs securely. If seat does not 2.1.2. Check

Streszczenie treści zawartej na stronie nr. 7

Section 2 - OPERATING INSTRUCTIONS 2.3 STARTING & OPERATION TO START ENGINE, 2.3.1. ENGINE (ELECTRIC START) PUSH CLUTCH/BRAKE IMPORTANT: When the ignition key is turned to PEDAL ALL THE WAY “START”, the engine will turn over, but will not start DOWN unless the Clutch/Brake pedal is pressed all the way down, the Blade Lever is in the “OFF” position (See Figure 2.5). The operator should be in the seat. Start engine as follows: 1. Move transmission shift lever to (N) Neutral positio

Streszczenie treści zawartej na stronie nr. 8

Section 2 - OPERATING INSTRUCTIONS 2.3 STARTING & OPERATION 4. Open vent on fuel filler cap by turning 2.3.1. ENGINE (ELECTRIC START) (Continued) counterclockwise. NOTE: Failure to open vent on 8. Should the battery be too weak to start the engine, the fuel filler cap can cause engine to stall. refer to Section “ENGINE (MANUAL START)” to 5. Move engine speed control to the choke position manually start the electric start engines. to start a cold engine. See Figure 2.6. 9. On Model 3314

Streszczenie treści zawartej na stronie nr. 9

Section 2 - OPERATING INSTRUCTIONS WARNING WARNING Once blade is disengaged, it should come to a DO NOT operate blades in reverse. STOP BLADES. complete stop in 3 seconds or less. If the blade LOOK and SEE behind and down for children, pets continues to rotate after 3 seconds, the blade brake and hazards before and while backing. must be adjusted. Refer to Section “BLADE BRAKE ADJUSTMENT” for adjustment procedures or return DEPRESS machine to an authorized SNAPPER dealer for CLUT

Streszczenie treści zawartej na stronie nr. 10

Section 2 - OPERATING INSTRUCTIONS TO APPLY WARNING BRAKES, PUSH CLUTCH/BRAKE DO NOT leave the machine with the engine running. PEDAL ALL THE CLUTCH/BRAKE STOP Blade. STOP engine. Shift to neutral and WAY DOWN PEDAL engage park brake. Remove key. 2.4 STOPPING - ENGINE, WHEEL DRIVE, BLADE 2.4.1. ENGINE 1. Stop engine by turning key to the “OFF” position. See Figure 2.13. TURN TO “OFF” POSITION PARK BRAKE LATCH SHOWN ENGAGED KEY FIGURE 2.14 BLADE LEVER IN “OFF

Streszczenie treści zawartej na stronie nr. 11

Section 2 - OPERATING INSTRUCTIONS 2.4 STOPPING - ENGINE, WHEEL DRIVE, BLADE 2.5. CUTTING HEIGHT ADJUSTMENT 2.4.4. PARK BRAKE 1. Adjust cutting height as desired to any one of 1. Engage park brake by pushing clutch/brake pedal five positions using deck lift lever. Move deck lift lever up or down to desired cutting height and then “DOWN” and moving the park brake latch to the move over to secure in the height of cut notch. “ENGAGED” position. While holding the park brake latch “ENGA

Streszczenie treści zawartej na stronie nr. 12

Section 2 - OPERATING INSTRUCTIONS 2.6 REVERSE LOCKOUT MECHANISM 2.6.1. Reverse Lockout Mechanism Override 1. Stop machine. Stop blade. Data indicates that tragic back-over accidents occur 2. Depress and hold Override Lever. each year. These accidents usually involve 3. Depress and hold Blade Pedals. Release unsupervised children. Many times these children have Override Lever. been given rides on the machine and have been trained 4. Move blade lever forward to “ON” position. to vie

Streszczenie treści zawartej na stronie nr. 13

Section 3 – MAINTENANCE 5. After all the oil has drained, close the drain and WARNING wipe up any oil that may have spilled. See Figure 3.1. DO NOT attempt any adjustments, maintenance, service Dispose of used oil properly. or repairs with the engine running. STOP engine. STOP 6. Fill engine crankcase with new oil. Refer to blade. Engage parking brake. Remove key. Remove your engine owner’s manual for oil specifications. spark plug wire from spark plug and secure away from 7. Chang

Streszczenie treści zawartej na stronie nr. 14

Section 3 - MAINTENANCE IMPORTANT: The blade drive belt on 33” decks does WARNING not require tension adjustment. If the belt becomes worn DO NOT attempt any adjustments, maintenance, or slack it must be replaced. Refer to Section “BLADE service or repairs with the engine running. STOP DRIVE BELT REPLACEMENT”. engine. STOP blade. Engage parking brake. Remove ENGINE key. Remove spark plug wire from spark plug and PULLEY secure away from plug. Engine and components are HOT. Avoid ser

Streszczenie treści zawartej na stronie nr. 15

Section 3 – MAINTENANCE 3.3.2. BATTERY FLUID LEVEL WARNING 1. Remove battery. Refer to Section “BATTERY DO NOT operate machine if interlock system is not REMOVAL”. 2. Remove battery caps. Check fluid level. functioning properly. Contact your SNAPPER dealer 3. Add water only to bring fluid to proper level – immediately for assistance. approximately 3/16” above plates. DO NOT OVERFILL. 3.2.7. INTERLOCK SYSTEM 4. Reinstall battery. Refer to Section “BATTERY Check interlock control

Streszczenie treści zawartej na stronie nr. 16

Section 3 - MAINTENANCE WARNING LEFT REAR DO NOT attempt any adjustments, maintenance or AXLE BEARING service with the engine or blades running. Stop GREASE blades. Stop engine. Engage parking brake. Remove FITTING key. Remove spark plug wires from spark plugs and (gas only) secure wires away from spark plugs. Engine and components are HOT. Avoid serious burns by allowing all parts sufficient time to cool. 3.3.7. FRONT WHEEL BEARING - LUBRICATION 1. Lubricate front wheel

Streszczenie treści zawartej na stronie nr. 17

Section 3 – MAINTENANCE FUEL WARNING TANK DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious HOSE burns, allow all parts to cool before working on machine. CLAMPS Fuel Filler Cap and Vent must be closed securely to prevent fuel spillage. 3. Check fill/level plug for damag

Streszczenie treści zawartej na stronie nr. 18

Section 3 – MAINTENANCE 3.7 REMOVING FUEL TANK Before removing fuel tank from rear engine rider, move rider outdoors where fumes can be easily dissipated. Removal of the tank is accomplished from the left side of the machine by pulling the tank straight up and away from the fuel tank bracket. Holding the fuel tank, remove the fuel filler cap and pour remaining fuel in an approved container. See Figure 3.11. FUEL FILLER CAP FUEL TANK

Streszczenie treści zawartej na stronie nr. 19

Section 4 - ADJUSTMENTS & REPAIR WARNING WARNING DO NOT attempt any adjustments, maintenance, DO NOT operate machine until blade brake is service or repairs with the engine running. Stop adjusted and functioning properly. If blade stop time engine. Stop blade. Engage parking brake. Remove can not be achieved with the adjustment procedure key. Remove spark plug wire from spark plug and described above, take machine immediately to an secure away from plug. Engine and components are au

Streszczenie treści zawartej na stronie nr. 20

Section 4 - ADJUSTMENTS & REPAIR 7. Turn eccentric “UP” or “DOWN” as required until WARNING blade tips are within 1/8” of each other. See Figure DO NOT attempt any adjustments, maintenance, 4.3. service or repairs with the engine running. STOP 8. Tighten shoulder bolt loosened in Step 6. engine. STOP blade. Engage parking brake. Remove 9. Readjust rear hanger chain pivots to align with key. Remove spark plug wire from spark plug and holes in support brackets. secure away from plug. En


Podobne instrukcje
# Instrukcja obsługi Kategoria Pobierz
1 Snapper "MR" SERIES 17 EMRP216517B Instrukcja obsługi Kosiarka 22
2 Snapper "MR" SERIES 17 MR216017BV Instrukcja obsługi Kosiarka 5
3 Snapper "MR" SERIES 17 MR216517B Instrukcja obsługi Kosiarka 8
4 Snapper "MR" SERIES 17 MR216017B Instrukcja obsługi Kosiarka 1
5 Snapper "MR" SERIES 17 MRP216017B Instrukcja obsługi Kosiarka 3
6 Snapper "MR" SERIES 17 WMR216517B Instrukcja obsługi Kosiarka 0
7 Snapper "MR" SERIES 17 WMR216017B Instrukcja obsługi Kosiarka 1
8 Snapper "MR" SERIES 17 MRP216517B Instrukcja obsługi Kosiarka 2
9 Snapper "MR" SERIES 17 WMR216017BV Instrukcja obsługi Kosiarka 1
10 Snapper "MR" SERIES 17 MRP216017BV Instrukcja obsługi Kosiarka 1
11 Snapper "MR" SERIES 17 WMRP216017B Instrukcja obsługi Kosiarka 0
12 Snapper "MR" SERIES 17 WMRP216517B Instrukcja obsługi Kosiarka 1
13 Snapper 0 Instrukcja obsługi Kosiarka 0
14 Snapper 0-7001 Instrukcja obsługi Kosiarka 2
15 Snapper 06124 Instrukcja obsługi Kosiarka 0
16 2Wire 7-1/4 Inch Circular Saw 94245 Instrukcja obsługi Kosiarka 3
17 Agilent Technologies E4371A Instrukcja obsługi Kosiarka 0
18 Agilent Technologies E4370A Instrukcja obsługi Kosiarka 3
19 Agilent Technologies E4374A Instrukcja obsługi Kosiarka 1
20 Adams 22 Instrukcja obsługi Kosiarka 1