Instrukcja obsługi Land Pride ZXT54 Pro

Streszczenie treści zawartej na stronie nr. 1

ZXT Roll Over Protective Structure
Assembly Instructions
Manual No. 357-274M
ZXT54 Pro & ZXT72 Pro Zero Turn Mowers
Before You Start
IMPORTANT: Your ZXT mower seat must have seat
belt mounting holes in the back rest side plates. See
Figure 1, balloon (B). If it does not, you will need to
When you see this symbol, the subsequent
replace your seat with one that does.
instructions and warnings are serious - follow
!
without exception. Your life and the lives of
A detailed listing of parts for this

Streszczenie treści zawartej na stronie nr. 2

Land Pride Further Assistance Folding ROPS Bar Assembly Refer to Figure 2: 1. Insert Roll Over Protective bar (#5) into mounting brackets (A & B). Mounting brackets (A & B) are located on either side of the mower frame directly behind the hydraulic oil expansion tanks. 1. Insert 1/2"-13 x 3 1/4" GR5 hex head cap screws (#3) through mounting brackets and ROPS (#5) mounting holes as shown. 2. Secure ROPS bar with 1/2" lock nuts (#4). Tighten lock nuts to 76 ft-lbs. 3. Rotate ROPS loop end (#6) up