Streszczenie treści zawartej na stronie nr. 1
Operator ′s manual
Rider 213 C Rider 216
Rider 216 AWD
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
E E E En n n ng g g glllliiiis s s sh h h h
Streszczenie treści zawartej na stronie nr. 2
CONTENTS Checking the cutting unit’s parallelism ......................... 22 Contents Adjusting the parallelism of the cutting unit .................. 22 CONTENTS Service position for the cutting unit .............................. 23 Contents ...................................................................... 2 Removing the BioClip plug ........................................... 24 KEY TO SYMBOLS Checking the blades ........................
Streszczenie treści zawartej na stronie nr. 3
KEY TO SYMBOLS Symbols Ignition These symbols are on the machine and in the instructions. Hydrostatic freewheel WARNING! Careless or incorrect use can result in serious or fatal injury to the operator or others. Warning: rotating parts. Keep hands and feet clear. Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. Parking brake Always wear: • Approv
Streszczenie treści zawartej na stronie nr. 4
KEY TO SYMBOLS Starting instructions Check the engine’s oil level Check the hydrostat’s oil level Lift up the cutting unit Apply and lock the parking brake. If the engine is cold, use the choke Release the parking brake before driving Switch off the engine and take off the ignition cable before repairs or maintenance 4 – English
Streszczenie treści zawartej na stronie nr. 5
INTRODUCTION Dear Customer, Thank you for choosing a Husqvarna Rider. Husqvarna Riders are built to a unique design with a front-mounted cutting unit and a patented articulated steering. Riders are designed for maximum efficiency even in small or confined areas. The closely grouped controls and pedal-operated hydrostatic transmission also contribute to the performance of this machine. This operator’s manual is a valuable document. By following its instructions (on ope
Streszczenie treści zawartej na stronie nr. 6
Service journal 13 Tell customer about: Pre-delivery service Needs and benefits of following the service 1 Charge the battery for 4 hours at max. 3 amp. schedule. 2 Fit steering wheel, seat and any optional Servicing and the influence of this journal on the equipment. second-hand value of the machine. 3 Check and adjust tyre pressure. (60 kPa, 0.6 bar, Range of applications for BioClip. 9 psi). Complete proof of sale etc. 4 Adjust cutting unit: Adjust lift springs (effective w
Streszczenie treści zawartej na stronie nr. 7
WHAT IS WHAT? 12 3 4 5 6 7 10 89 11 12 13 14 Location of the controls 1 Speed limiter for driving forward 8 Parking brake 2 Speed limiter for reversing 9 Lock button for parking brake 3 Lifting lever for the cutting unit 10 Seat adjustment. 4 Cutting height adjustment lever 11 Lever to disengage the driving front axle, 216 AWD 5 Ignition lock 12 Fuel cap 6 Throttle control/choke control 13 Battery 7 Cover lock 14 Lever to disengage the drive, 213 C and 216 Lever to disengage the dr
Streszczenie treści zawartej na stronie nr. 8
SAFETY INSTRUCTIONS • Remember that the driver is responsible for dangers or Safety instructions accidents. These instructions are for your safety. Read them carefully. • Never carry passengers. The machine is only intended to be used by one person. Insure your Rider • Check the insurance coverage for your new Rider. • Contact your insurance company. • You should have fully comprehensive insurance including: third party, fire, damage, theft and liability General use • Read all the instruc
Streszczenie treści zawartej na stronie nr. 9
SAFETY INSTRUCTIONS • Never allow children or other persons not trained in the This is what you do use of the machine to use or service it. Local laws may • Remove obstacles such as stones, branches, etc. regulate the age of the user. • Mow upwards and downwards, not sideways. WARNING! You must use approved personal • Do not use the machine on ground that slopes more than protective equipment whenever you use the 10°. ! machine. Personal protective equipment • Take extra care if any attach
Streszczenie treści zawartej na stronie nr. 10
SAFETY INSTRUCTIONS • Follow the manufacturer’s recommendations regarding • Petrol and petrol fumes are poisonous and extremely wheel weights or counterbalance weights to increase flammable. Be especially careful when handling petrol, as machine stability. carelessness can result in personal injury or fire. • Only store fuel in containers approved for the purpose. IMPORTANT INFORMATION • Never remove the fuel cap and fill the fuel tank when the engine is running. Wheel weights fitted on the rear
Streszczenie treści zawartej na stronie nr. 11
SAFETY INSTRUCTIONS • Do not change the setting of governors. If you run too fast, you risk damaging the machine components. See chapter on Technical data for highest permitted engine speed. • Never use the machine indoors or in spaces lacking proper ventilation. Exhaust fumes contain carbon monoxide, an odourless, poisonous and highly dangerous gas. • Stop and inspect the equipment if you run over or into anything. If necessary, make repairs before starting. • Never make adjustments with
Streszczenie treści zawartej na stronie nr. 12
PRESENTATION Speed limiter Presentation The speed of the machine is steplessly regulated with two Congratulations on your choice of an excellent quality product pedals. Pedal (1) is used to drive forwards, and pedal (2) to that will give you great pleasure for many years. This drive backwards. operator’s manual describes Rider 213 C, Rider 216 and Rider 216 AWD. 1 Rider 216 AWD is equipped with all wheel drive. 2 The power transmission from the engine is handled by a hydrostatic transmissi
Streszczenie treści zawartej na stronie nr. 13
PRESENTATION Cutting height adjustment lever Release lever Rider 213 C, Rider 216 The cutting height can be adjusted to 10 different positions The release control must be pulled out in order for the with the cutting height lever. machine to be moved when the engine is shutoff. Pull the controls to the end positions, do not use an intermediate Combi-unit 25-75 mm position. Seat The seat has a jointed attachment on the front edge and can be tipped forward. The seat can also be adjusted lengthw
Streszczenie treści zawartej na stronie nr. 14
START START START START Driving The engine can not be started if the parking brake is not Before starting pressed down. With a cold engine: IMPORTANT! 4 Move the throttle to position 3 (choke position). In this The air intake grille in the engine cover behind the driver’s position the engine is fed with a richer mixture, which seat must not be blocked by, for example, clothing, leaves, means the engine is easier to start. grass or dirt. 1 2 Impaired cooling of the engine. Risk of major engi
Streszczenie treści zawartej na stronie nr. 15
Driving Starting the engine with a weak Driving the Rider battery 1 Release the parking brake by first pressing down the parking brake pedal and then releasing it. WARNING! Lead-acid batteries produce explosive gases. Avoid sparks, open flames ! and smoking close to batteries. Always wear protective glasses in the vicinity of batteries. If the battery is too weak to start the engine, it should be 2 Carefully press down one of the pedals until the required recharged. speed is obtained. Pedal
Streszczenie treści zawartej na stronie nr. 16
T S OP START Driving Cutting tips Stop the engine Preferably allow the engine to idle for a minute to obtain normal working temperature before stopping it if it has been working hard. Avoid idling the engine for long periods, as there is a risk of carbon build-up on the spark plugs. 1 Lift up the cutting unit by pulling the lever backwards to its locked position. WARNING! Clear the lawn from stones and other objects which can be thrown out by ! the blades. • Localise and mark stones and o
Streszczenie treści zawartej na stronie nr. 17
Maintenance Maintenance schedule The following is a list of the maintenance which should be conducted on the machine. For those points not described in this manual, visit an authorised service workshop. Daily maintenance At least once Maintenance Maintenance before starting a year interval in hours 25 50 100 200 Cleaning X Check the engine’s oil level X Check the engine’s cooling air intake X Check the fuel pump air filter X Check the steering wires X Check the brakes X Check the battery X Chec
Streszczenie treści zawartej na stronie nr. 18
Maintenance Front cover Cleaning Release the clip on the front hood and lift off the fender. Clean the machine directly after use. It is much easier to wash off grass cuttings before they dry. Right-hand fender Remove the accelerator knob (1), screws (2), and remove the cover. Oily dirt can be removed using a cold degreasing agent. 2 Spray on a thin layer. 1 Rinse at normal water pressure. 2 Do not direct the jet towards electrical components or 2 bearings. Do not rinse hot surfaces such as
Streszczenie treści zawartej na stronie nr. 19
Maintenance 2 Check the tension of the steering wires by squeezing Adjusting the parking brake Rider them together by the arrows as illustrated. It should be 216 AWD possible to push them together so that the distance between them is half as much, without using unnecessary Check that the parking brake is adjusted correctly by placing force. the machine on a slope with the front and rear axles disengaged. Apply and lock the parking brake. When the machine does not stand still, the parking
Streszczenie treści zawartej na stronie nr. 20
Maintenance 2 Pull the choke wire casing to the far right and tighten the 7 Slide the filter onto the air hose. clamping screw. 8 Push the filter cartridge in place. 3 Pull back the throttle to the full throttle position and check that the choke is no longer actuated. 9Refit the air filter cover. Replacement of fuel filter Replacing the air filter Replace the fuel filter every 100 running hours (once per season) or more frequently if it is clogged. If the engine seems to lack power or does not run sm
