Instrukcja obsługi Honda Power Equipment QH5000

Streszczenie treści zawartej na stronie nr. 1

Streszczenie treści zawartej na stronie nr. 2

Thank you for purchasing a Honda Front Quick-Hitch Kit. This manual covers the installation and operation of the Honda QH5000 Quick-Hitch on Honda RT5000, H5013, and H5518 tractors. A parts list and customer service information are included on’ pages 5 and 6. Make sure this manual remains with the Quick-Hitch if resold. The information in this publication was in effect at the time of approval for printing. American Honda Motor Co., Inc. reserves the right to discontinue, or to change specif

Streszczenie treści zawartej na stronie nr. 3

SAFETY Read this operators manual carefully, and familiarize yourself fully with its safety recommendations and operating procedures before using the attachment. Follow the instructions in this publication at Failure to do so could result in all times, and insist that those who work with you do likewise. personal injury or equipment damage. SAFE OPERATING RULES l To avoid injury, keep bystanders, children, and pets away from the operating area. l Stay clear of the front of the hitch and

Streszczenie treści zawartej na stronie nr. 4

INSTALLATION INSTRUCTIONS 1. HITCH PIVOT INSTALLATION H5518 Tractors: RT5000 and H5013 Tractors: To provide clearance for the quick-hitch, the The 16.1 mm diameter hitch pivots provided collars must be removed from the IO x 20 mm with the tractor must be replaced with 22.1 mm diameter pivots. flange bolts that attach lower frame cover A. Pivot, 22.1 mm (2 required) a. Remove the two 10 x 20 mm flange bolts H/C 3502374; P/N 76323-752-JO0 from the front edge of lower frame cover A. Remo

Streszczenie treści zawartej na stronie nr. 5

2. Install a 5/s2-inch cotter pin in one end of the pivot rod, and place a 7/8-inCh flat 5/32” COTTER PIN washer on the inner side of the cotter pin. 3. Lift the rear of the Quick-Hitch into position between the hitch pivots, and secure the hitch with the pivot rod. 11/16” FLAT WASHER 4. Place a 7/8-inCh washer on the pivot rod, and secure the rod with a 5/32 x 215/i6-inch spring clip. 5. RT5000 and H5013 Tractors: Tighten the 8mm flange bolts on the hitch pivots that were installe

Streszczenie treści zawartej na stronie nr. 6

REPLACEMENT PARTS 15 Q 5 1 Pin (l/4” x 1 3/r. I 6 1 Cotter Pin 13/32” ; 3/4”) 1 I I 7 1 Attaching Lever I 1 I 8 1 Rubber Handle Grip 1 9 1 Flat Washer 19/16”) I 1 r- 10 r Cotter Pin (l/8” x 1”) I 2 I 11 Bolt (3/8” NC x 1 l/2”) 1 12 Lock Nut (3/8” NC, Nylon) 1 13 Pivot Rod 1 14 Flat Washer (11 /16”) 2 15 Cotter Pin (5/32” x 1”) 4 16 Spring Pin (5/32” x 2 15/l 6”) 3 17 Lift Link 2 18 Clevis Pin 4 19 Chain 1 20 Linch Pin (5/l 6”) 1 21 Safety Chain and Pin Assembly

Streszczenie treści zawartej na stronie nr. 7

CUSTOMER SERVICE INFORMATION Honda Power Equipment dealership personnel are trained professionals. They should be able to answer any questions you may have. If you encounter a problem that your dealer does not solve to your satisfaction, please discuss it with the dealership’s management. The Service Manager or General Manager can help. Almost all problems are solved in this way. If you are dissatisfied with the decision made by the dealership’s management, contact the Honda Power Equipmen

Streszczenie treści zawartej na stronie nr. 8