Streszczenie treści zawartej na stronie nr. 1
Harrier 56
CODES
560G, 561G
OWNER’S HANDBOOK
Original Version (EN)
ISSUE: 20.12.10 PART NUMBER: 111-4502 (B)
Streszczenie treści zawartej na stronie nr. 2
CONTENTS Contents 2 - Grassbag 9 - Without Grass Collection 9 Introduction 3 - Heavy Growth 9 - Friction Disc 10 Specifications / Main Features 4 - Non-Grassed Areas 10 - Maintenance Schedule 10 Safety Precautions 5 - 6 - Engine Detail 10 - Safety Alert Symbol 5 - Training 5 Mower Maintenance 11 - 14 - Preparation 5 - Carburettor Adjustments 11 - Safety Symbols 5 - Oil Service 11 - Operation 5 - 6 - Air Cleaner Service 11 - Maintenance & Storage 6 - Spark Plug Service 11 - Control Symbols 6 -
Streszczenie treści zawartej na stronie nr. 3
INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you Use of non standard parts or any arbitrary modifications carried out on this machine may gain safe and efficient service from your machine. relieve Hayter Limited of liability for any resulting damage or injury. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it Hayter mowers are robustly constructed and designed for efficient economical perform- gives essential inform
Streszczenie treści zawartej na stronie nr. 4
SPECIFICATIONS / MAIN FEATURES Code 560 561 Engine Briggs & Stratton Briggs & Stratton Engine type Series 850 Series 850 Engine / Cutterbar Speed 2750 rpm 2750 rpm Fuel type Unleaded petrol Unleaded petrol Fuel capacity 1.5 litres 1.5 litres Oil type SAE 30 engine oil SAE 30 engine oil Oil sump capacity 0.6 litres 0.6 litres Cutting width 560mm 560mm Cutting height 13 - 60mm 13 - 60mm Overall dimensions 1080 x 590 x 1510mm 1080 x 590 x 1510mm Weight 49.5 Kg 52.5 Kg 12 13 11 1. Spark P
Streszczenie treści zawartej na stronie nr. 5
SAFETY PRECAUTIONS Safety Alert Symbol Preparation Operation This safety alert symbol indicates important safety While mowing, always wear substantial footwear and long Do not operate the engine in a confined space where messages. When you see this symbol be alert to the trousers. Do not operate the equipment when barefoot or exhaust fumes (carbon monoxide) can collect. possibility of injury. Carefully read the following and wearing sandals. inform others. Always pull the starter cord slowly
Streszczenie treści zawartej na stronie nr. 6
SAFETY PRECAUTIONS Allow the engine to cool before storing in any enclosure. Stop the engine and disconnect the spark plug lead: Operation Cont’d - Before clearing blockages or unclogging the dis- Always ensure the blade has stopped, by releasing the To reduce the fire hazard, keep the engine and the charge chute. engine stop lever, before tilting the mower for surrounding deck area free of grass, leaves, or excessive - Before cleaning/checking or working on the ma- transportation or cross
Streszczenie treści zawartej na stronie nr. 7
ASSEMBLING THE MOWER BEFORE FIRST USE The oil level is correct when it is at the full mark on Delivery Checklist Grassbag Assembly the dipstick. DO NOT OVERFILL. (Refer fig.5) Remove the mower from the packaging and check that Before first use assemble the grassbag and frame. Slide the following items have been supplied correctly. If any the frame (1) into the grassbag (2), ensuring that the han- items are missing contact, your local Hayter dealer. dle is above the grassbag as shown. Attach pl
Streszczenie treści zawartej na stronie nr. 8
OPERATING THE MOWER Only operate the lever with the engine running to prevent Controls Electric Start damage. Operate all control levers several times and ensure that (Code 561 only) the cables move freely. Check that the engine stop and Stand behind the mower and hold the handlebar together If the engine stop lever is released the engine will stop. ground drive clutch levers return freely to their rest with the engine stop lever. Turn the ignition key in a position when released. (Refer
Streszczenie treści zawartej na stronie nr. 9
OPERATING THE MOWER tiles. Inspect the area for hidden obstructions which and mow the area again as necessary until the required Stopping when contacted by the cutterblade could risk health finish is obtained. Release the ground drive clutch lever and release the and safety or result in damage to the mower. Remem- To prevent damage to your lawn do not remove more engine stop lever. ber the location of these obstructions and ensure that than one third of grass height in one cut. (Refer fig.1
Streszczenie treści zawartej na stronie nr. 10
OPERATING THE MOWER / MAINTENANCE SCHEDULE Daily Friction Disc Engine Detail (Refer fig.20) - Check the oil level The cutterblade is driven by the engine via a friction - Remove grass debris from around the engine, exhaust/ disc to help prevent damage occurring to the engine exhaust guard, air ways in the top cowl, underside of crankshaft and cutting mechanism when a hidden the deck housing and from the grassbag and check for obstruction or overload is encountered. (Refer fig.18) signs of d
Streszczenie treści zawartej na stronie nr. 11
MOWER MAINTENANCE the exhaust/exhaust guard, the air ways in the top cowl Carburettor Adjustments Air Cleaner Service and the surrounding deck areas on a daily basis after Should only be made by an authorised Briggs & Stratton To service the air cleaner, loosen screw (1) and remove use. Never spray the engine with water during cleaning. dealer. Under no circumstances should the engine be cover (2). (Refer fig.22) Water can contaminate the fuel. Always clean with a adjusted to run at a spee
Streszczenie treści zawartej na stronie nr. 12
MOWER MAINTENANCE The condition of the cutterblade and its mounting Securing Nuts & Bolts Lubrication arrangement should be checked regularly for signs of Regularly check that all securing nuts and bolts are tight. Lubricate the wheels, pivot points and linkages with wear or damage. Ensure that the cutterblade is not bent Replace missing or damaged items immediately. engine oil every 25 operating hours. or cracked. Apply a good quality medium grease to the inner control cables at the point
Streszczenie treści zawartej na stronie nr. 13
MOWER MAINTENANCE knobs sufficiently to allow it to be pivoted forwards to - Clean grass and debris from the engine cylinder, Cutterblade Assembly rest against the mower. Take care to ensure that the con- cylinder head cooling fins, under top cowl, around and Assemble the cutterblade with the turned up edges facing trol cables do not become snagged at the pivot point and behind exhaust/exhaust guard and ensure that the grass towards the engine. Secure the cutterblade using the bolt dep
Streszczenie treści zawartej na stronie nr. 14
MOWER MAINTENANCE - Disconnect the battery lead from the charger and then (c) The consumer has a critical role in returning waste Battery Charging connect the battery lead to the mower lead. electronic/electrical equipment for recycling and disposal. (Code 561 only) - PREVENT ACCIDENTS: ALWAYS charge the IMPORTANT - PREVENT DAMAGE: NEVER (d) Recycling keeps products out of the municipal waste battery in a well ventilated area. connect the battery charger to the engine lead as this stream.
Streszczenie treści zawartej na stronie nr. 15
LAWN CARE CALENDAR To be used as a guide only January June October There is very little work to do this month apart from Summer mowing should now be under way. It should be Rake out the thatch from the turf and spike the lawn to brushing away leaves. Keep off the grass if frozen or necessary to mow the lawn twice a week. Raking before assist in drainage. Brush in peat and sharp sand. mowing is important this month as the combined action waterlogged. keeps runners of clover under control. Wat
Streszczenie treści zawartej na stronie nr. 16
TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION PROBLEM CAUSES CORRECTIVE ACTION Discharge chute blocks 1. Grass is wet 1. Mow dry grass 1. Engine stop lever released 1. Operate engine stop lever 2. Cut height is too low 2. Increase cut height Engine will not turn 2. Incorrect oil level 2. Check oil level 3. Grassbag full 3. Empty grassbag over 3. Obstruction under deck 3. Remove obstruction 4. Airflow through the grassbag 4. Clean the grassbag 4. Battery discharged (if fitted) 4. Charge batte
Streszczenie treści zawartej na stronie nr. 17
WARRANTY NOTES LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / transaxle (where applicable) furnish their own warranty and services are provided through their authorised network. To qualify for the full benefit of the warranty, the warranty regis
Streszczenie treści zawartej na stronie nr. 18
NOTES NOTES 18 19
Streszczenie treści zawartej na stronie nr. 19
NOTES NOTES 18 19
Streszczenie treści zawartej na stronie nr. 20
CUSTOMER INFORMATION SERVICE RECORD CODE SERIAL NO. 1st Y ear (12 months ) 1st Y ear (12 months ) Owner ’s Name : We certify that this service has been carried out by an Authorised Hayter Serial Number: Service Dealer Date: Date: Engine Type:- Engine:- Date of Sale:- Your Local Dealer:- Note for dealer : Please retain this voucher for your records. 2nd Y ear (24 months ) 2nd Y ear (24 months ) Owner ’s Name : We certify that this serv
