Streszczenie treści zawartej na stronie nr. 1
JUBILEE
CODES
422V . 423V . 424V
(Push) (Push) (Auto Drive)
OWNER’S HANDBOOK
(English Version)
FROM SERIAL NO: 422V001001, 423V001001, 424V001001 HANDBOOK: 422064 (Rev.0.)
Issue : March 2001
Streszczenie treści zawartej na stronie nr. 2
305113 MAIN FEATURES / SPECIFICATIONS Main Features 1. Primer Bulb. 2. Fuel Filler Cap. 3. Oil Filler Cap and Dipstick. 8 4. Handlebar Securing Knob. 7 5. Rope Guide. 9 6. Engine Start-Grip. 7. Engine Stop lever. 6 8. Handlebar. 9. Ground Drive Clutch Lever (Auto drive only). 10. Rear Deflector. 11. Grassbag Assembly. 4 12. Serial Number Decal. 10 5 13. Height of Cut Adjuster. 14. Spark Plug Lead. 3 2 11 4 1 12 14 13 1D42205A Specifications Engine Briggs & Stratton Quantum XM 45 Engine type 1278
Streszczenie treści zawartej na stronie nr. 3
CONTENTS 1.2 Main Features/Specifications 1.18 Maintenance Schedule 1.3 Contents 1.19 - 1.25 Mower Maintenance 1.19 - Engine 1.4 Introduction 1.19 - Carburettor Adjustments 1.20 - Oil Service 1.5 Warranty 1.20 - Air Cleaner Service 1.21 - Spark Plug Service 1.6 - 1.9 Safety Precautions 1.21 - Keeping Engine Clean 1.21 - Grassbag 1.9 Safety Symbols 1.22 - Deck Housing 1.9 Decal Symbols 1.22 - Securing Nuts and Bolts 1.22 - Clutch Cable Adjustment 1.10 Assembling the Mower 1.23 - Lubrication 1.
Streszczenie treści zawartej na stronie nr. 4
INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you gain safe and efficient service from your mower. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety, operation, maintenance and specifications. Read and understand this handbook prior to operating your mower for the first time. Make sure you are familiar with all the controls and points of regular maintenance. If you
Streszczenie treści zawartej na stronie nr. 5
WARRANTY LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of the engines furnish their own warranty and services are provided through their authorised network (Refer to "Engine Warranty Statement"). To qualify for the full benefit of the warranty, the warranty registration card must be returned within 6
Streszczenie treści zawartej na stronie nr. 6
SAFETY PRECAUTIONS Safety Alert Symbol This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury. Carefully read the following and inform others. Your mower is perfectly safe if used correctly. Failure to observe the following precautions may result in serious injury. Training Before using the mower read the owners handbook carefully. Pay par- ticular attention to the safety precautions. Ensure that you are familiar with the con
Streszczenie treści zawartej na stronie nr. 7
SAFETY PRECAUTIONS Preparation - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely. A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition. A damaged cutterblade must be replaced immedi- ately with a genuine Hayter replacement part. Operation Do not operate the engine in a confined space where exhaust fumes (carbon m
Streszczenie treści zawartej na stronie nr. 8
SAFETY PRECAUTIONS Operation Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift the rear deflector while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot. Stop the engine and disconnect the spark plug lead: - Before clearing blockages or unclogging the discharge chute. - Before cleaning/checking or working on the mower. -
Streszczenie treści zawartej na stronie nr. 9
SAFETY PRECAUTIONS Maintenance & Storage Allow the engine to cool before storing in any enclosure. To reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease. Check the rear deflector and grassbag frequently for wear or deterioration. Replace worn or damaged parts for safety. If the fuel tank has to be drained, this should be done outdoors and when the engine is cool. Wear strong work gloves when removing and reassembling the cut- terblade
Streszczenie treści zawartej na stronie nr. 10
ASSEMBLING THE MOWER Delivery Checklist Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer. 1. Engine Handbook. 2. Warranty Reg. Card. 3. Grassbag To prevent accidents cut off the long ribbon attached to the grass- bag and discard. Handlebar Unscrew the handlebar securing knobs sufficiently to allow the handle- bar to pivot. Unfold the handlebar to the operating position. Tighten both ha
Streszczenie treści zawartej na stronie nr. 11
BEFORE STARTING THE MOWER Prevent Engine Damage To prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol before starting the engine. Oil Type Always use high quality detergent oil classified SAE 30 Oil. Never use additives with this oil. To prolong the life of your engine it is important that the oil is changed after the first 5 hours of use - refer to ‘Maintenance Schedule’. Check Oil Level 0.15 Clean around the o
Streszczenie treści zawartej na stronie nr. 12
Double 3 OPERATING THE MOWER Controls Operate all control levers several times and ensure that the cables move freely. Check that the engine stop and (ground drive clutch levers - Autodrive model) return freely to their rest position when released. Starting - Step 1 Push the primer button 5 times allowing 2 seconds between each push. Step 2 Stand behind the mower and hold the handlebar with your left hand together with the engine stop lever. With your right hand hold the engine start - gri
Streszczenie treści zawartej na stronie nr. 13
OPERATING THE MOWER Turning To make a wide turn steer the mower with the handlebar in the direc- tion required. To make a tight turn (release the ground drive clutch lever, Autodrive model), apply downward pressure on the handlebar to raise the front wheels just above ground level and steer in the required direction. To prevent accidents do not raise the front of the mower exces- sively when making a turn. Never raise the rear of the mower when the engine is running. Stopping Release the ground
Streszczenie treści zawartej na stronie nr. 14
OPERATING THE MOWER Before Mowing To prevent accidents thoroughly inspect the area and remove all objects which when contacted by the cutterblade could become dangerous projectiles. Inspect the area for hidden obstructions which when contacted by the cutterblade could risk health and safety. Remember the location of these obstructions and ensure that you mow around them. Grassbag Lift the grassbag through the handlebar and close the rear deflector to rest against the rear of the mower. To empty
Streszczenie treści zawartej na stronie nr. 15
OPERATING THE MOWER Non-Grassed Areas When moving the mower across non-grassed areas, stop the cut- terblade and set the mower to the maximum height of cut to protect the cutting mechanism. 1.15
Streszczenie treści zawartej na stronie nr. 16
LAWN CARE CALENDAR To be used as a guide only. January There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. February Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary. March The yearly lawn work programme really starts this month. As soon as the ground conditions are suitable, the first cut can be made. The first cut should merely “top” the grass as
Streszczenie treści zawartej na stronie nr. 17
LAWN CARE CALENDAR August Keep mowing regularly and watering as necessary. Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. September Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow. October Rake out the thatch from the turf and spike the lawn to assist in drainage. Brush in peat and sharp sand. November Use a stiff broom to dispers
Streszczenie treści zawartej na stronie nr. 18
MAINTENANCE SCHEDULE Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty, dry conditions, or when airborne debris is present or after extensive operation cutting tall, dry grass. First 5Hrs After the very first five hours change the engine oil Daily Check the oil level Remove grass debris from around the engine, exhaust/exhaust guard and air ways in the top cowl and underside of the deck housing.
Streszczenie treści zawartej na stronie nr. 19
MOWER MAINTENANCE To prevent accidents stop the engine, disconnect the spark plug lead before attempting to carry out maintenance procedures on the mower. Engine 7 1. Finger Guard 8 2. Carburettor 1 3. Spark Plug / Lead 4. Exhaust Guard 6 9 5. Exhaust 6. Oil filler Cap/ Dipstick 7. Start Grip 1CG422V09A 8. Fuel Cap 9. Air cleaner. 2 5 3 4 Carburettor Adjustments Should only be made by an authorised Briggs & Stratton dealer. Under no circumstances should the engine be adjusted to run at a spe
Streszczenie treści zawartej na stronie nr. 20
MAINTENANCE MOWER Oil Service Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to-‘Before Starting the Mower’ for oil checking and filling instructions. Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:- 1. Drain fuel by running the engine until the fuel tank is empty. 2. Remove the spark plug lead. 3. Allow the engine to cool. 4. Drain the oil while the engine i
