Streszczenie treści zawartej na stronie nr. 1
Harrier
48
CODE 481A
(Electric Start)
OWNER’S HANDBOOK
(English Version)
FROM SERIAL NO: 481A001001 HANDBOOK: 481145 (Rev.1.)
Issue : 22.10.01
Streszczenie treści zawartej na stronie nr. 2
MAIN FEATURES /SPECIFICATIONS Main Features 1. Spark Plug Lead 2. Air Cleaner 3. Engine Cover 9 4. Fuel Cap 10 5. Oil Filler Cap & Dipstick 8 6. Rear Deflector 18 7. Engine Start Grip 8. Engine Stop Lever 11 7 9. Handlebar 10. Ground Drive Clutch Lever 11. Throttle Control 12. Grassbag Assembly 6 13. Handlebar Securing Knob 12 14. Handlebar Height Adjust Knob 17 19 15. Height of Cut Lever 16. Muffler Guard 4 13 17. Battery 18. Ignition Key 3 19. Serial Number Decal 2 1 14 15 5
Streszczenie treści zawartej na stronie nr. 3
CONTENTS 1.1 Main Features/Specifications 1.17 Maintenance Schedule 1.2 Contents 1.18 - 1.24 Mower Maintenance 1.18 - Engine 1.3 Introduction 1.18 - Throttle Cable Adjustment 1.18 - Carburettor Adjustments 1.4 Warranty 1.19 - Oil Service 1.19 - Air Cleaner Service 1.5 - 1.8 Safety Precautions 1.20 - Spark Plug Service 1.20 - Keeping Engine Clean 1.8 Safety Symbols 1.20 - Grassbag 1.8 Decal Symbols 1.21 - Deck Housing 1.21 - Securing Nuts and Bolts 1.9 Assembling the Mower 1.21 - Clutch Cable
Streszczenie treści zawartej na stronie nr. 4
INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you gain safe and efficient service from your mower. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety, operation, maintenance and specifications. Read and understand this handbook prior to operating your mower for the first time. Make sure you are familiar with all the controls and points of regular maintenance. If you
Streszczenie treści zawartej na stronie nr. 5
WARRANTY LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of the engines furnish their own warranty and services are provided through their authorised network (Refer to "Engine Warranty Statement"). To qualify for the full benefit of the warranty, the warranty registration card must be returned within 6
Streszczenie treści zawartej na stronie nr. 6
SAFETY PRECAUTIONS Safety Alert Symbol This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury. Carefully read the following and inform others. Your mower is perfectly safe if used correctly. Failure to observe the following precautions may result in serious injury. Training Before using the mower read the owners handbook carefully. Pay par- ticular attention to the safety precautions. Ensure that you are familiar with the con
Streszczenie treści zawartej na stronie nr. 7
SAFETY PRECAUTIONS Preparation - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely. A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition. A damaged cutterblade must be replaced immedi- ately with a genuine Hayter replacement part Operation Do not operate the engine in a confined space where exhaust fumes (carbon mo
Streszczenie treści zawartej na stronie nr. 8
SAFETY PRECAUTIONS Operation Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift the rear deflector while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot. Stop the engine and disconnect the spark plug lead: - Before clearing blockages or unclogging the discharge chute. - Before cleaning/checking or working on the mower. -
Streszczenie treści zawartej na stronie nr. 9
SAFETY PRECAUTIONS Maintenance & Storage Allow the engine to cool before storing in any enclosure. To reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease. Check the rear deflector and grassbag frequently for wear or deterioration. Replace worn or damaged parts for safety. If the fuel tank has to be drained, this should be done outdoors and when the engine is cool. Wear strong work gloves when removing and reassembling the cut- terblade
Streszczenie treści zawartej na stronie nr. 10
ASSEMBLING THE MOWER Delivery Checklist Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer. 1. Engine Handbook. 2. Warranty Reg. Card. 3. Grassbag. 4. Charger 5. Ignition Key To prevent accidents cut off the long ribbon attached to the grass- bag and discard. Handlebar Unscrew the handlebar securing knobs sufficiently to allow the handle- bar to pivot. Move the engine stop lever away fr
Streszczenie treści zawartej na stronie nr. 11
BEFORE STARTING THE MOWER Prevent Engine Damage To prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol before starting the engine. Oil Type Always use high quality detergent oil classified “For service SE, SF, SG” SAE 30 oil. Never use additives with recommended oils. SAE 10W-30 multigrade oil may be used, but this will result in higher engine operating temperatures with consequential high oil consump- tion. It
Streszczenie treści zawartej na stronie nr. 12
OPERATING THE MOWER Controls Operate all control levers several times and ensure that the cables move freely. Check that the engine stop and ground drive clutch levers return freely to their rest position when released. Whilst operating the engine throttle mechanism slight resistance should be felt when moving the lever to the ‘choke’ position. Starting - Step 1 Move the throttle control lever to the ‘choke’ position before starting a cold engine. Move the throttle control lever to the ‘fast’ po
Streszczenie treści zawartej na stronie nr. 13
OPERATING THE MOWER Forward Travel Hold the handlebar and operate the ground drive clutch lever to power the mower in a forward direction. When the ground drive clutch lever is disengaged the mower may be pushed. This feature is useful when mowing in confined areas. If the engine stop lever is released the engine will stop. Turning To make a wide turn steer the mower with the handlebar in the direc- tion required. To make a tight turn release the ground drive clutch lever, apply down- ward press
Streszczenie treści zawartej na stronie nr. 14
OPERATING THE MOWER Height of Cut + Move the height of cut lever sideways to disengage it from the locking notch, then push forwards to lower or pull backwards to raise the height - of cut. Release the lever in the required position and ensure that it locks firmly into one of the seven notch settings. Always select a height of cut to suit operating conditions. Prevent engine overloading and blockages by avoiding low cuts in long grass conditions. Be prepared to make two cuts when the grass is lo
Streszczenie treści zawartej na stronie nr. 15
OPERATING THE MOWER Heavy Growth Areas of heavy growth should be mown without collecting the clip- pings. If collection is required, first mow the area without the grass- bag at the maximum height of cut setting. Allow the grass clippings to dry out and then mow the area at the maximum height of cut setting with the grassbag fitted. Reduce the height of cut and mow the area again as necessary until the required finish is obtained. 305113 To prevent grass damage do not remove more than one thi
Streszczenie treści zawartej na stronie nr. 16
LAWN CARE CALENDAR To be used as a guide only. January There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. February Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary. March The yearly lawn work programme really starts this month. As soon as the ground conditions are suitable, the first cut can be made. The first cut should merely “top” the grass as
Streszczenie treści zawartej na stronie nr. 17
LAWN CARE CALENDAR August Keep mowing regularly and watering as necessary. Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. September Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow. October Rake out the thatch from the turf and spike the lawn to assist in drainage. Brush in peat and sharp sand. November Use a stiff broom to dispers
Streszczenie treści zawartej na stronie nr. 18
MAINTENANCE SCHEDULE Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty, dry conditions, or when airborne debris is present or after extensive operation cutting tall, dry grass. First 5Hrs After the very first five hours change the engine oil Daily Check the oil level Remove grass debris from around the engine, exhaust/exhaust guard and air ways in the top cowl and underside of the deck housing.
Streszczenie treści zawartej na stronie nr. 19
MOWER MAINTENANCE To prevent accidents stop the engine disconnect the spark plug lead before attempting to carry out maintenance procedures on the mower. Engine 1. Engine Cowl 8 7 2. Carburettor 6 3. Spark Plug / Lead 9 4. Muffler Guard 5. Muffler 6. Oil filler Cap/ Dipstick 10 7. Start Grip 8. Fuel Cap 1 9. Finger Guard 2 10. Air Cleaner 5 4 3 Throttle Cable Adjustment 2 Remove two screws securing the engine cowl and remove the cowl to 3 expose the throttle mechanism on the front of the engine.
Streszczenie treści zawartej na stronie nr. 20
MOWER MAINTENANCE Oil Service Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to-‘Before Starting the Mower’ for oil checking and filling instructions. Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:- 1. Drain fuel by running the engine until the fuel tank is empty. 2. Remove the spark plug lead. 3. Allow the engine to cool. 4. Drain the oil while the engine i
