Streszczenie treści zawartej na stronie nr. 1
® ®
SPEEDZTR
Operator Manual
SPEEDZTR 44 / 968999538 SPEEDZTR 36 / 968999539
SPEEDZTR 44 / 968999547 SPEEDZTR 36 / 968999609
SPEEDZTR 44 / 968999611 SPEEDZTR 42 / 968999689
SPEEDZTR 42 / 968999713
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
Streszczenie treści zawartej na stronie nr. 2
©2008 HTC. All rights reserved. Beatrice, NE. Printed in U.S.A.
Streszczenie treści zawartej na stronie nr. 3
TABLE OF CONTENTS INTRODUCTION .......................................................4 Choke Cable ........................................................38 Driving and Transport on Public Roads .................4 Air Filter ...............................................................39 Towing ...................................................................4 Fuel Filter ............................................................40 Operating ..............................................
Streszczenie treści zawartej na stronie nr. 4
INTRODUCTION Congratulations Towing Thank you for purchasing a Dixon ride-on mower. This Do not tow this machine, it may cause damage to the machine is built for superior efficiency to rapidly mow drive system. primarily large areas. A control panel easily accessible Do not tow any trailers, etc. with this mower. They may to the operator and a hydrostatic transmission jackknife or overturn causing damage to the mower regulated by steering controls both contribute to the and possible seriou
Streszczenie treści zawartej na stronie nr. 5
INTRODUCTION Good Service Dixon’s products are sold only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer. See the certificate in the Service Journal in this operator’s manual. When you need spare parts or support in service questions, warranty issues, etc., please consult the following professional: Engi
Streszczenie treści zawartej na stronie nr. 6
SYMBOLS AND DECALS These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. WARNING! Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx. Used in this publication to notify the reader of a risk of personal injury or death, particularly if the reader should neglect to follow instructions given in the manual. IMPORTANT INFORMATION Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx.
Streszczenie treści zawartej na stronie nr. 7
SYMBOLS AND DECALS Read Shut off engine and Keep a safe Use on slopes No passengers Operator’s remove key before distance from no greater Manual performing any the machine than 10° maintenance or repair work Whole body Severing of fingers Do not open or Careful backing up, Careful going exposure to and toes remove safety watch for other forward, watch for thrown objects shields while people other people engine is running Moving sharp blades under cover DIXON-7
Streszczenie treści zawartej na stronie nr. 8
SAFETY WARNING! WARNING! This symbol means that important THIS CUTTING MACHINE IS CAPABLE safety instructions need to be OF AMPUTATING HANDS AND FEET emphasized. It concerns your safety. AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. These instructions are for your safety. Read them carefully. General Operation 1. Read, understand, and follow all instructions on the machine and in the manual before starting. 2. Do no
Streszczenie treści zawartej na stronie nr. 9
SAFETY 1. Disengage blades when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge chute. 2. Operate machine only in daylight or good artificial light. 3. Do not operate the machine while under the influence of alcohol or drugs. 4. Watch for traffic when operating near or crossing roadways. 5. Use extra care when loading or unloading the machine into a trailer or truck. 6. Alwa
Streszczenie treści zawartej na stronie nr. 10
SAFETY Personal Safety Equipment WARNING! When using the machine, approved personal protective equipment (shown in illustrations) shall be used. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your retailer for help in choosing the right equipment. • Make sure that you have first aid equipment close at hand when using the machine. • Never use the machine when barefoot. • Always wear protective shoes or
Streszczenie treści zawartej na stronie nr. 11
SAFETY 7. Use extra care while operating machine with grass catchers or other attachments; they can affect the stability of the machine. 8. Do not use on steep slopes. 9. Do not try to stabilize the machine by putting your foot on the ground. 10. Do not mow near drop-offs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in. 8011-509 Be extra cautious when driving on slopes Children Tragic accidents can occur if the operator is
Streszczenie treści zawartej na stronie nr. 12
SAFETY WARNING! The engine must not be started when the driver’s floor plate or any protective plate for the mower deck’s drive belt is removed. Safe Handling of Gasoline To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. • Extinguish all cigarettes, cigars, pipes, and other sources of ignition. • Use only approved gasoline container. • Never remove gas cap or add fuel with the engine running. All
Streszczenie treści zawartej na stronie nr. 13
SAFETY General Maintenance • Never operate machine in a closed area. • Keep all nuts and bolts tight to be sure the equipment is in safe working condition. • Never tamper with safety devices. Check their proper operation regularly. • Keep machine free of grass, leaves, or other debris buildup. Clean oil or fuel spillage and remove any fuel-soaked debris. Allow machine to cool before storing. • If you strike a foreign object, stop and inspect the machine. Repair, if necessary, before resta
Streszczenie treści zawartej na stronie nr. 14
SAFETY • Ensure that nuts and bolts, especially the fastening bolts for the blade attachments, are properly tightened, torqued and that the equipment is in good condition. • Do not modify safety equipment. Check regularly to be sure it works properly. The machine must not be driven with defective or unmounted protective plates, protective cowlings, safety switches, or other protective devices. • Do not change the settings of governors and avoid running the engine with overly high engin
Streszczenie treści zawartej na stronie nr. 15
SAFETY • The blades are sharp and can cause cuts and gashes. Wrap the blades or use protective gloves when handling them. • Check the parking brake’s functionality regularly. Adjust and service as necessary. • The mulch blades should only be used in familiar areas when higher quality mowing is desired. • Reduce the risk of fire by removing grass, leaves, and other debris that may have accumulated on the machine. Allow the machine to cool before putting it in storage. • Regularly clean de
Streszczenie treści zawartej na stronie nr. 16
SAFETY Roll Over Protection System (ROPS) The ROPS increases the basic weight of the unit by 42 WARNING! lbs/19 kg. The ROPS is an accessory. The rollover protection system’s • Do not use ROPS as a lifting, attaching or capabilities may be impaired by anchoring point. damage if the mower is overturned • Do not use ROPS for wrecking or towing. or if alteration to the ROPS occurs. If • Do not exceed Max GVW: 2822 lbs/1283 kg. these conditions take place, the total • Read machine operator´s
Streszczenie treści zawartej na stronie nr. 17
CONTROLS This operator’s manual describes the Dixon Zero Turn Rider. The rider is fitted with either a Briggs & Stratton or Kohler four-stroke overhead valve engine developing 16 - 22 horse power. Transmission from the engine is made via two belt- driven hydraulic pumps, which in turn drive a hydraulic motor for each drive wheel. Using the left and right steering controls, the flow is regulated and thereby the direction and speed. 1 10 4 3 2 11 6 8 9 7 5 1. Motion Control Levers 7. Throttl
Streszczenie treści zawartej na stronie nr. 18
CONTROLS Motion Control Levers The machine’s speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a neutral position. Furthermore, there is a neutral position, which is locked if the steering controls are moved outward. When both controls are in the neutral position (N), the machine stands still. By moving both controls an equal amount forward or backward, the machine moves in a straight line forward o
Streszczenie treści zawartej na stronie nr. 19
CONTROLS Seat Adjustment Lever The seat can be adjusted lengthways. When making adjustments, sit on the seat. Slide the lever to the side and maneuver seat to appropriate placement and release lever. 8050-165 Seat adjustment Bypass Linkage Push lever in Unlocking Transmission and lock notch When pushing or pulling the mower, be sure to engage on frame the bypass linkages. (2 places) 1. Always turn off engine before engaging or disengaging the hydro release (free wheel) lever. Never atte
Streszczenie treści zawartej na stronie nr. 20
CONTROLS Fuel Tank The machine has one fuel tank, just behind the seat. The tank capacity is 4.5 gallons (17 liters). The engine will run on a minimum of 85-octane unleaded gasoline (no oil mix). Environmentally adapted alkylate gasoline can be used. See also Technical Data concerning ethanol fuel. Methanol fuel is not allowed. When operating below 32°F (0°C) use fresh, clean winter grade gasoline to help insure good cold weather starting. 8050-106 Fuel tank WARNING! Gasoline is highly fl
