Streszczenie treści zawartej na stronie nr. 1
Plug-In Wall Battery Charger
1-Amp Trickle Charge – 120V plug-in
Manual Operation
Reverse-Hookup Protection
Convenient 12-Foot Power Cord
Applications – Charge small batteries,
keep larger batteries warm in cold temperatures.
Model SE-1
Streszczenie treści zawartej na stronie nr. 2
Mountable Maintainer 1.5-Amp Trickle Charge – 120V plug-in – charges in 2 to 12 hours LEDs - indicate Power On and Charged Fully Automatic – once battery is charged, unit switches from full charge to float-mode monitoring “On-Board” Feature – comes complete with hardware & bracket to mount charger next to battery Reverse-Hookup Protection Molded Plastic Case Short Leads For Safety – minimize chance of getting tangled in moving engine parts Model SE-1-12S
Streszczenie treści zawartej na stronie nr. 3
Battery Charger 1-Amp Trickle Charge – 120V plug-in, Manual Operation 50-Amp Clamps Quick-Disconnect Harness Utilize ring connector and only hook harness up once No need to remove battery again to charge Both the 50-Amp clamp & ring connectors snap into place in seconds Reverse-Hookup Protection Molded Plastic Case Model MC-1
Streszczenie treści zawartej na stronie nr. 4
Metal Hand-Held Linear Battery Charger Manual Operation Rugged Durable Metal Case Top Mounted Carrying Handle Model SE-1010-2 Model SE-82-6 10-Amp Fast Charge –charges a 6-Amp Medium Charge – charges battery in 3 to 5 hours most batteries in 6 to 8 hours 2-Amp Trickle Charge – charges a 2-Amp Trickle Charge – charges a small 12 volt battery in 2 to 12 hours small 12 volt battery in 2 to 12 hours
Streszczenie treści zawartej na stronie nr. 5
Metal Hand-Held Linear Battery Charger Fully Automatic/Manual Operations Rugged Durable Metal Case Model SE-40MAP Model SE-520MA Top Mounted Carrying Handle 10-Amp Fast Charge – charges a 10-Amp Fast Charge – charges a battery in 3 to 5 hours battery in 3 to 5 hours 2-Amp Trickle Charge – charges a small 12 volt battery in 2 to 12 hours LED- shows Fully Charged
Streszczenie treści zawartej na stronie nr. 6
Metal Hand-Held Linear Battery Charger/Starter Manual Operation Rugged Durable Metal Case Top Mounted Carrying Handle Model SE-1052 Model SE-1250 50-Amp Engine Start – for emergency 50-Amp Engine Start – for starting emergency starting 10-Amp Fast Charge – charges a battery 30-Amp Boost – for quick charges in 3 to 5 hours 10-Amp Fast Charge – charges a 2-Amp Trickle Charge – charges a small battery in 3 to 5 hours 12 volt battery in 2 to 12 hours
Streszczenie treści zawartej na stronie nr. 7
Metal Hand-Held Linear Battery Charger/Starter Fully Automatic 2 LEDs Rugged Durable Metal Case Top Mounted Carrying Handle Model SE-5212A Model SE-1275A Model SE-1510MA 50-Amp Engine Start – for 75-Amp Engine Start – for 100-Amp Engine Start – for emergency starting emergency starting emergency starting 10-Amp Fast Charge – charges 12-Amp Fast Charge – 15-Amp Fast Charge – charges a a battery in 3 to 5 hours charges a battery in 2 to 5 battery in 2 to 4 hours hours 2
Streszczenie treści zawartej na stronie nr. 8
Metal Hand-Held Linear Charger/Starter Fully Automatic/Manual Operation 2 LEDs Rugged Durable Metal Case Top Mounted Carrying Handle Model SE-2151MA Model SE-125A 100-Amp Engine Start – for emergency 125-Amp Engine Start – for emergency starting starting 15-Amp Fast Charge – charges a 15-Amp Fast Charge – charges a battery in battery in 2 to 4 hours 2 to 4 hours 2-Amp Trickle Charge – charges a 2-Amp Trickle Charge – charges a small, 12 small 12 volt battery in 2 t
Streszczenie treści zawartej na stronie nr. 9
Metal Hand-Held Linear Charger/Starter 10-Amp Fast Charge – Charges a deep-cycle battery in 7 to 11 hours. Charges an automotive battery in 3 to 5 hours Flexible Function – select manual or fully automatic function for special applications Fully Automatic - once battery is charged, unit switches on and off as needed Rugged Durable Metal Case Top Mounted Handle Model SE-70MA
Streszczenie treści zawartej na stronie nr. 10
Multiple Battery Charger 10 or 5-Amp Charge Rate Manual Operation Rotary Switch Selection Includes 5 Jumpers – for connecting batteries in series Charge Up to Six 12V or Twelve 6V Batteries Dual-rate Output Safety – has overload & short-circuit protection Rugged Durable Metal Case Top Mounted Carrying Handle Applications – 6V & 12V batteries, hooked Model SE-1072 up in 12, 24, 36, 48, 60 or 72 Volt configurations 12V 6V
Streszczenie treści zawartej na stronie nr. 11
Signature Series Linear Battery Charger Rugged Polypropylene Case Built-In Top Mounted Carrying Handle Model 520A-PE Model 82-6-PE 10-Amp Fast Charge – charges a 12V battery in 3 6-Amp Medium Charge Rate – Charges a 12V to 5 hours battery in 6 to 8 hours 2-Amp Trickle Charge – charges a small 12 volt 2-Amp Trickle Charge – charges a small 12- battery in 2 to 12 hours Volt battery in 2 to 12 hours Fully Automatic Manual Operation 2 LEDs – signals Power On and Fully Charged
Streszczenie treści zawartej na stronie nr. 12
Signature Series Linear Battery Charger/Starter Rugged Polypropylene Case Built-In Top Mounted Carrying Handle Model 5216A-PE Model 1050-PE 50-Amp Engine Start – for emergency starting 50-Amp Engine Start – for emergency starting 10-Amp Fast Charge – charges a 12V battery 10-Amp Fast Charge – charges a 12V battery in 3 to 5 hours in 3 to 5 hours 2-Amp Trickle Charge – charges a small 12V 2-Amp Trickle Charge – charges a small 12V battery in 2 to 12 hours battery in 2 to 12
Streszczenie treści zawartej na stronie nr. 13
Speed Charge Maintainer 1.5-Amp Charger and Maintainer Fully Automatic – once battery is charged, unit switches from Full Charge to Float-Mode Monitoring Microprocessor Controlled Automatic Voltage Detection Automatic Temperature Compensation Thermal Runaway Protection Safety Start – charger will not supply current to battery until it is properly connected to a battery. LEDs – indicate Charging, Charged and Power Quick-Disconnect Harness Model SEM-1562A Utilize ring connec
Streszczenie treści zawartej na stronie nr. 14
SpeedCharge Battery Charger Microprocessor Controlled LEDs Indicate – Charging, Charged and Trouble Safety Start Fully Automatic – once battery is charged, unit switches from Full Charge to Float-Mode Monitoring Quick-Disconnect Harness - Utilize ring connector and only hook harness up once The 50-Amp clamps snap into place in seconds! Model SC-300A Model SC-200A Use male adaptor plug to recharge booster 3-Amp Charge – 120V 2-Amp, 12V Charge – 120V packs or plug-in,
Streszczenie treści zawartej na stronie nr. 15
SpeedCharge Battery Charger Microprocessor Controlled Thermal Runaway Protection Safety Start Electronic Push Button Controls Sturdy, Built-In Handle Molded Polypropylene Case Model SC-600A Model SC-1000A 6-Amp Medium Charge – charger monitors battery 10-Amp Medium Charge – charger monitors battery condition and automatically adjusts charging rate, condition and automatically adjusts charging rate, preventing battery damage preventing battery damage 4-Amp Medium Charge – sel
Streszczenie treści zawartej na stronie nr. 16
SpeedCharge Battery Charger 12-Amp Fast Charge – charger monitors battery condition and automatically adjusts charging rate, preventing battery damage 8-Amp Medium Charge – self-adjusting charge rate ideal for everyday charging needs 2-Amp Slow Charge – for charging small batteries and maintaining large ones 50-Amp Clamps – offer versatility for top and side- mounted battery posts Microprocessor Controlled Thermal Runaway Protection Safety Start - charger will not supply curren
Streszczenie treści zawartej na stronie nr. 17
SpeedCharge Hybrid Battery Charger/Starter/Tester Microprocessor Controlled Thermal Runaway Protection Safety Start Charging Status LEDs Electronic Touch Pad Controls 125-Amp Sure-Grip Clamps Retractable Handle Built-In Digital Voltmeter/Tester Molded Polypropylene Case Model SC-8020A Model SC-10030A 80-Amp engine start 100-Amp engine start 10 ◄►20-Amp fast charge 12 ◄►30-Amp fast charge 2-Amp Trickle Charge 2-Amp Trickle Charge
Streszczenie treści zawartej na stronie nr. 18
SpeedCharge Ship N’ Shore High Frequency Charger Microprocessor Controlled Thermal Runaway Protection Safety Start Charging Status LEDs Electronic Push Button Controls Molded Polypropylene Case Model SSC-1500A Model SSC-1000A 10-Amp Fast Charge – charger monitors battery 15-Amp Fast Charge – charger monitors battery condition and automatically adjusts charge rate, condition and automatically adjusts charge rate, preventing battery damage for car, truck, marine, preventing batt
Streszczenie treści zawartej na stronie nr. 19
Signature Series Ship N’ Shore Battery Charger Fully Automatic LED Indicators Reverse-Hookup Safeguard Built-in Convenient Carrying Handle Model SS-120A-PE Model SS-51A-PE 12-Amp FAST Charge 10-Amp Fast Charge – ideal for Flexible Function – manual or automatic everyday charging needs Microprocessor Controlled
Streszczenie treści zawartej na stronie nr. 20
Ship N’ Shore Battery Charger True 10-Amp Charge for– Single 12V battery Two 12V Batteries in a two-battery, 24-Volt system True 20-Amp Charge – for single 12-Volt battery Fully Automatic Multiple Marine Capabilities – comes complete with two sets of output cords Microprocessor Controlled – dedicated processor for each independently controlled bank Safe – ignition protected, non-sparking battery leads allow safe charging, even on board Electrically Independent Outputs –
