Streszczenie treści zawartej na stronie nr. 1
User's Guide
dell.com/regulatory_compliance
TM TM
Dell OptiPlex 780-USFF All In One (AIO) Stand
The Dell OptiPlex 780-USFF All-in-One Stand is a unique
mounting solution with integrated cable management
designed to adapt to your unique environment.
1/15
Streszczenie treści zawartej na stronie nr. 2
Hazard Symbols Review These symbols alert the user about a safety condition that demands attention. All users of the product should be able to recognize and understand the significance of the following safety hazards if encountered on the product or within product documentation. A NOTE indicates important information that helps you make NOTE better use of your Dell AIO Stand. A CAUTION indicates potential damage to hardware or loss of CAUTION data and tells you how to
Streszczenie treści zawartej na stronie nr. 3
Contents 1 About your Dell OptiPlex 780-USFF AIO Stand ……………………………………………….. 4 2 Setting up the Dell OptiPlex 780-USFF AIO Stand ……………………………………………. 6 3 Specifications …………………………………………………………………………................... 15 4 Finding Information ……………………………………………………………………................. 15 3/15
Streszczenie treści zawartej na stronie nr. 4
About your Dell OptiPlex 780-USFF AIO Stand 1 1 DELL Monitor: P190S/1909W/P2210 2 DELL Quick Release Monitor Mounting Plate 3 System Sleeve 4 System Chassis: Dell OptiPlex 780-USFF 5 Cable Tray 6 Cable Channels o 7 Swiveling Base - 360 Pan 8 Front Cable Cover 9 Provided Cables: VGA and USB 4/15
Streszczenie treści zawartej na stronie nr. 5
10 Handle 11 System Cable Cover Lock Switch 12 System Label Carrier 13 System Cable Cover 14 Padlock Ring 15 Network Cable Slot 16 Wall Power Cord Slot 17 System Lock Switch 18 Kensington Security Slot 5/15
Streszczenie treści zawartej na stronie nr. 6
Setting up the Dell OptiPlex 780-USFF AIO Stand 2 Components AIO Stand, Cable Cover, System Sleeve, VGA / USB Cable NOTE Refer to the Monitor and System Instruction Guides, packaged separately. ______________________________________________________________________________________ Place the AIO Stand on a level, stable surface. 1 WARNING To reduce risk of injury and/or equipment damage, the AIO Stand must be placed on a level, stable surface. 6/15
Streszczenie treści zawartej na stronie nr. 7
Determine which monitor cable will be used (VGA or DisplayPort), and follow appropriate 2 instructions. a Locate the provided VGA cable. VGA b Route the VGA cable through the cable tray. DisplayPort Locate the system-end of the cable in the cable tray. a b Remove the front cable cover to locate the monitor-end of the cable. 7/15
Streszczenie treści zawartej na stronie nr. 8
Attach the monitor to the AIO stand. 3 Connect the power plug, the monitor cable (VGA or DisplayPort), and the USB cable to the 4 monitor. DisplayPort 8/15
Streszczenie treści zawartej na stronie nr. 9
Route the accessory cable (keyboard, mouse, speakers, etc.) through the cable tray. 5 Ensure the system sleeve is unlocked (orange tab will show). 6 9/15
Streszczenie treści zawartej na stronie nr. 10
7 a Extend the system label carrier. b If applicable, remove mylar from front surface(s) of chassis prior to sleeve installation. Insert the system into the system sleeve in the orientation illustrated below. CAUTION Do not reverse the insertion orientation! NOTE When inserted properly, the CD end of the system will reach the end of the system sleeve. Slide the switch to lock the system sleeve. 8 10/15
Streszczenie treści zawartej na stronie nr. 11
Ensure the AIO stand is unlocked (orange tab will show). 9 Slide the system sleeve onto the back of the AIO stand. Ensure that the cables do not 10 impede the sleeve from fully seating onto the stand. 11/15
Streszczenie treści zawartej na stronie nr. 12
Connect the monitor cable (VGA or DisplayPort), power plug, network cable and any 11 accessory cables, (keyboard, mouse, speaker, etc.) to the rear of the system. 12 a Slide the lock switch out to unlock the cable cover. With the system label carrier extended, attach the cable cover underneath the label carrier and to the system sleeve. Then push the system label carrier back to reveal the cable cover lock switch. Slide b the switch to lock the cable cov
Streszczenie treści zawartej na stronie nr. 13
Slide the switch to lock the AIO stand. 13 Attach customer-supplied security accessories. 14 NOTE These security features are only accessible when the AIO Stand lock is engaged as shown in Step 13. 13/15
Streszczenie treści zawartej na stronie nr. 14
15 a Connect your facility network cable to the rear of the AIO stand to access the facility network. Connect b the power cord supplied with the system to the rear of the AIO Stand and to facility wall power. ______________________________________________________________________________________ Range of Motion 14/15
Streszczenie treści zawartej na stronie nr. 15
Specifications 3 Physical Dimensions Height 15 inches (380 mm) Depth 9.6 inches (245 mm) Width 10.8 inches (275 mm) Weight 8.0 lbs (3.7 kg) * not including monitor and system Monitor and System Weight Capacities Dell Monitor: P190S/1909W/P2210 ≦ 10.1 lbs (4.6 kg) Dell System: OptiPlex 780-USFF ≦ 7 lbs (3.2 kg) Tempera
