Instrukcja obsługi Mitel 5610 IP Dect

Streszczenie treści zawartej na stronie nr. 1

QUICK REFERENCE GUIDE
MITEL 5610 IP DECT CORDLESS HANDSET
Turn Handset On or Off Signal Range
The cordless handset has an indoor signal
Press and hold key.
®
The Mitel 5610 Cordless Handset and IP DECT Stand provides Mitel Communications Director (MCD) range of up to 50 meters (150 feet) from the IP
SIP call processing features on a cordless handset. The IP DECT stand also provides conferencing, call DECT stand. This range can be limited by
transfer, and other basic features between hands

Streszczenie treści zawartej na stronie nr. 2

QUICK REFERENCE GUIDE QUICK REFERENCE GUIDE phone to activate the speaker. Handset Display - Idle Mode Handset Display Main Menu End a Call •Press [!] to turn speakerphone off. •Press . Redial a Call • From Idle mode, press OPTIONS. Reject a Call • Press or REJECT. • Press to display the most recently dialled number. • MISSED CALL appears in the display. If you have a voice mailbox, the call is •Press . forwarded to it. Enter Main Menu Add a Contact (Optional) # Main Menu - Description # I

Streszczenie treści zawartej na stronie nr. 3

QUICK REFERENCE GUIDE Call a Contact (Optional) Change the Ringer Melody • Press to enter the main menu. • Press to enter the main menu. • Select SETTINGS and then AUDIO SETTINGS. • Select CONTACTS. • Select RINGER MELODY and then select VoIP. • Select the contact that you want to call. • Select ALL LINES. • Select a melody from the list and press . •Press . • Press PLAY to listen to the melody and then press STOP. Call Hold • Press to select the desired melody. • While on a call, press HOLD. •

Streszczenie treści zawartej na stronie nr. 4

QUICK REFERENCE GUIDE About Feature Access Codes • Enter your PIN code (Default is 0000) and press . You can dial codes to activate Call Forwarding features and Do Not Disturb. The feature access codes • Select LANGUAGE. provided in this guide are the default system codes.Your system may be programmed with different codes. Contact your System Administrator to obtain the codes assigned for your system. • Select the desired language and press . Note that when your handset is programmed in a per

Streszczenie treści zawartej na stronie nr. 5

QUICK REFERENCE GUIDE Do Not Disturb Remove Belt Clip Cover Do Not Disturb (DND) stops internal calls from ringing your handset. DND returns busy tone to the caller. Use the belt clip removal tool. Insert the tool between the belt clip cover and the phone.Then, using your DND does not stop external calls from ringing your handset nor does it affect your ability to make calls. thumb, press down and slide the clip up and off the back of the phone. • To enable, dial the Do Not Disturb Feature Acc

Streszczenie treści zawartej na stronie nr. 6

QUICK REFERENCE GUIDE Troubleshooting Symptom Possible Cause Corrective Action Unable to remove belt clip You are not inserting the removal Insert the removal tool as shown in cover using removal tool. tool far enough into opening be- the graphic on the previous page. tween the handset and clip cover. Handset display is black. Handset is in power saving mode. Press any key. Battery is drained. Put handset in charging cradle to re- charge battery. Handset does not charge. Power to handset chargi