Streszczenie treści zawartej na stronie nr. 1
Item #: V44Y76
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 12/2010
Streszczenie treści zawartej na stronie nr. 2
Parts List
Streszczenie treści zawartej na stronie nr. 3
Hardware List
Streszczenie treści zawartej na stronie nr. 4
Carefully lay glass (1) upside down on a soft surface. Screw long rods (A) and short rods (B) into the appropriate metal plates of glass (1). Slide cylinders (4) onto back long rods (A). Slide large decorative rings (D) onto back long rods (A) and snap onto cylinders (4). Slide cylinders (7) onto front long rods (A). Slide small decorative rings (E) onto front long rods (A) and snap onto cylinders (7).
Streszczenie treści zawartej na stronie nr. 5
Carefully slide glass (2) into place using long rods (A) as guides. Slide large decorative rings (D) onto back long rods (A). Slide small decorative rings (E) onto front long rods (A). Slide cylinders (3) onto back long rods (A). Slide large decorative rings (D) onto back long rods (A) and snap onto cylinders (3). Slide cylinders (6) onto front long rods (A). Slide small decorative rings (E) onto front long rods (A) and snap onto cylinders (6). Cylinders (3,6) will fit snuggly into the decor
Streszczenie treści zawartej na stronie nr. 6
Carefully slide glass (2) into place using long rods (A) as guides. Slide large decorative rings (D) onto back long rods (A). Slide small decorative rings (E) onto front long rods (A). Screw cylinders (5) onto back long rods (A). Screw cylinders (8) onto front long rods (A). Cylinders (5,8) will fit snuggly into the decorative rings placed in the previous step.
Streszczenie treści zawartej na stronie nr. 7
Insert large caps (F) into cylinders (5) and small caps (G) into cylinders (8). Note that caps (F,G) may come pre-inserted into cylinders (5,8). To attach cable management system (9) to the stand, place appropriate holes of cable management system (9) over short rods (B). Screw cap nuts (C) onto short rods (B) and tighten with wrench (H).
Streszczenie treści zawartej na stronie nr. 8
