Instrukcja obsługi Walker Edison 44" Columbus TV Console W44CMPBL

Streszczenie treści zawartej na stronie nr. 1

Item #: W44CMP
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 10/2010

Streszczenie treści zawartej na stronie nr. 2

General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The four main types of hardware used to assemble this product are: wood dowels, cam bolts and locks, bolts and screws. V. The provided glue is to secure wood dowels in place. When first inserting dowels, locate the appropriate hol

Streszczenie treści zawartej na stronie nr. 3

Parts List

Streszczenie treści zawartej na stronie nr. 4

Hardware List Short wood dowel 16 pcs Long wood dowel 6 pcs Large cam lock 32 pcs Small cam lock 8 pcs Short cam bolt 24 pcs Long cam bolt 8 pcs Bolt 6 pcs Wrench 1 pc Handle 2 pcs Round-head screw 4 pcs Plastic wedge 8 pcs Small screw 8 pcs Large screw 8 pcs Glue tube 2 pcs Sticker 40 pcs The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included.

Streszczenie treści zawartej na stronie nr. 5

Screw short cam bolts (E) into stand top (1). Attach feet (12) and stand support (11) to stand base (3) using bolts (G) and wrench (H).

Streszczenie treści zawartej na stronie nr. 6

Screw short cam bolts (E) into stand base (3). Insert short dowels (A) into panels (8) on appropriate sides.

Streszczenie treści zawartej na stronie nr. 7

Insert short dowels (A) into panels (4,5,6,7) on appropriate sides. Attach panels (5,6,7,8) to stand base (3) using cam bolts and dowels as guides. Note that panels (8) are not attached to panels (6,7), but that all panels should align when attached to stand base (3). Secure panels (6,7,8) to stand base (3) by inserting large cam locks (C) into panels (6,7,8) and tightening with a screwdriver.

Streszczenie treści zawartej na stronie nr. 8

Slide back panel (10) into the stand assembly along the grooves at the back of the assembly. Note that the vinyl lamination of back panel (10) should face out. 7 Insert long dowels (B) into panels (6,7,8).

Streszczenie treści zawartej na stronie nr. 9

Attach middle panel (2) to stand assembly using dowels as guides. Insert long cam bolts (F) into middle panel (2). Insert large cam locks (C) into panels (6,8) and tighten with a screwdriver.

Streszczenie treści zawartej na stronie nr. 10

7 Insert long cam bolts (F) into middle panel (2). Insert large cam locks (C) into panels (7,8) and tighten with a screwdriver. Attach panels (4,8) to the stand assembly using cam bolts and dowels as guides. Secure panels (4,8) by inserting large cam locks (C) into panels (4,8) and tightening with a screwdriver.

Streszczenie treści zawartej na stronie nr. 11

Attach panels (4,8) to the other end of the stand assembly using cam bolts and dowels as guides. Secure panels (4,8) by inserting large cam locks (C) into panels (4,8) and tightening with a screwdriver. Slide back panel (9) into the stand assembly along the grooves at the back of the assembly.

Streszczenie treści zawartej na stronie nr. 12

8 4 8 8 4 8 Insert large cam locks (C) into panels (4,8). Attach stand top (1) to the stand assembly using cam bolts and dowels as guides. Tighten large cam locks (C) with a screwdriver. Screw short cam bolts (E) into drawer fronts (17,18). Attach handles (J) to drawer fronts (17,18) using round head screws (K).

Streszczenie treści zawartej na stronie nr. 13

Attach drawer sides (13,15) to drawer back (14) using large screws (N). Slide drawer bottom (16) into the grooves of the drawer assembly. Note that the vinyl lamination of drawer bottom (16) should be on the inside of the drawer. Repeat this step for the second drawer. Attach drawer front (17) to the first drawer assembly using cam bolts as guides. Insert small cam locks (D) into drawer sides (13,15) and tighten with a screwdriver.

Streszczenie treści zawartej na stronie nr. 14

Attach drawer front (18) to the second drawer assembly using cam bolts as guides. Insert small cam locks (D) into drawer sides (13,15) and tighten with a screwdriver. Carefully slide drawer assemblies into the stand assembly.

Streszczenie treści zawartej na stronie nr. 15

9 10 Secure back panels (9,10) to the stand assembly using plastic wedges (L) and small screws (M).