Instrukcja obsługi Sanus Systems Sanus Ultimate Foundations UF34

Streszczenie treści zawartej na stronie nr. 1

the next section. To utilize the steel speaker
PHOTO 5
studs, simply thread them into the holes in the
corners of the top plates until the end protrudes
1/8 inch through the bottom. Place your speaker
on the steel speaker studs.(Photo 5) Insert the
ULTIMATE FOUNDATIONS®
small allen key into the bottom of each steel
INSTRUCTION MANUAL
speaker stud and adjust them until the speaker
is level and does not rock back and forth. Lock
in place with a machine nut. Use of the steel
speaker stud

Streszczenie treści zawartej na stronie nr. 2

ʻTake the time to find the right speaker locations for your listening room.ʼ 1] Attach three rubber isolation rings to each NuStone base . (Photo 2) At- PHOTO 1 tach three NuStone feet to each NuStone base. (Photo 3) B 2] Group three pillars with each NuStone base. Notice that the bolt holes are countersunk on one side of the base; this side is the bottom and faces away from the pillar. Align the countersunk holes in the base with the holes in either E end of the pillars. Bolt the pillar