Instrukcja obsługi Sanus Systems EFAV-II

Streszczenie treści zawartej na stronie nr. 1

Assembly Instructions for Model: EFAV-II
Thank you for choosing the Sanus Systems Model EFAV-II. Every effort has
been made to ensure that your Sanus Systems furniture is perfect. If you have
questions or feel that there is a problem of any kind, please contact us at
800-359-5520 or at www.sanus.com. We can quickly help with any issues
regarding assembly or missing parts. Replacement parts for Sanus systems
products purchased through authorized dealers will be shipped directly to you.
Supp

Streszczenie treści zawartej na stronie nr. 2

Step 1 - Attach Floor Glides to Metal Frame Thread the fi ve Floor Glides (I) into the Metal Base (D). Diagram 1 I D I I I I Step 2 - Attach 3” Cope Tubes to Metal Base Thread a Shelf Connector (H) securely into the four 3” Cope Tubes (B). NOTE: Do not tighten the Pan Head Bolts (G) until the entire EFAV-II is assembled. Place a Pan Head Bolt (G) through each of the four holes in the Metal Base (D); then, thread them into the four 3” Cope Tubes (B). Diagram 2 H B H B G G D G G

Streszczenie treści zawartej na stronie nr. 3

Step 3 - Place a Video Shelf on the Metal Base Align four holes in a Video Shelf (E) with the Shelf Connectors (H) threaded into the 3” Cope Tubes (B) in Step 2; then, place the Video Shelf onto the 3” Cope Tubes. Diagram 3 H E B H B Step 4 - Secure the Angled Center Support to the Video Shelf NOTE: Make sure the coped end of the Angled Center Support (C) fi ts over the Metal Base (D). Attach the Angled Center support (C) to the bottom of the Video Shelf (E) by threading a Pan Head Bolt (G) up

Streszczenie treści zawartej na stronie nr. 4

Step 5 - Attach 8” Pillars By hand, fi rmly thread an 8” Pillar (A) to the four Shelf Connectors (H) protruding through the Video Shelf (E). Diagram 5 A H H E D NOTE If you are installing addditional shelves, refer to the Assembly Instructions for Model: EFVS-II. Step 6 - Secure Video Shelf to 8” Pillars Place the Video Shelf (E) on the 8” Pillars (A); then, using the Allen Key (K) and fi ve Top Bolts (F), secure the Video Shelf to the 8” Pillars. Using the same Allen Key (K) tighten the four P

Streszczenie treści zawartej na stronie nr. 5

Step 7 - Install Wire Bushings Snap the four Wire Bushings (J) into the four holes in the Video shelves (E). Diagram 7 E J E J Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 2.01.06 (000009) Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com