Instrukcja obsługi RocketFish RF-TVMFM01

Streszczenie treści zawartej na stronie nr. 1

RF-TVMFM01_10-0451_QSG_V2_EN_finalLR.pdf 1 8/23/2011 11:56:36 AM
QUICK SETUP GUIDE
1 Install the arm assembly 2 Attach the mounting hardware
RF-TVMFM01
Option 1: Installing to a wood stud wall Option 1: For TVs with inset mounting or that require extra space for wires
Note: Any material covering the wall must not exceed 16 mm (5/8 in.).
Install spacers (E), washers (D), and screws (C) into the top two holes in the back of the TV.
1 Locate the stud. Verify the center of the stud with an

Streszczenie treści zawartej na stronie nr. 2

RF-TVMFM01_10-0451_QSG_V2_EN_finalLR.pdf 2 8/23/2011 11:56:42 AM IMPORTANT SAFETY INSTRUCTIONS 3 Mount the TV to the arm assembly 4 Adjust the angle of tilt SAVE THESE INSTRUCTIONS Option 1: For TVs with inset mounting or that require extra space for wires If necessary, adjust the tilt tension by hand or by using the hex key (F). CAUTION: Do not use this product for any purpose not explicitly specied 1 Mount the TV by tting the top spacers, screws, and washers onto the 12° by Rockets