Instrukcja obsługi RocketFish RF-TVMLPT03

Streszczenie treści zawartej na stronie nr. 1

16 - 24 in.
406mm - 610mm
QUICK SETUP GUIDE
1 Attach the TV brackets 2 Install the wall plate
RF-TVMLPT03
Option 1: Attaching to a at Option 1: Installing to a wood stud wall
Caution: Avoid potential injuries or property damage! DO NOT over-tighten the lag bolts.
mounting surface
C
Note: Any material covering the wall must not exceed 5/8 in. (16 mm).
Attach the left and right TV brackets
(B and C) to the back of the TV using:
a. Locate the studs. Verify the center

Streszczenie treści zawartej na stronie nr. 2

4 Adjust the tilt angle Option 2: Installing to a solid concrete or concrete block wall 3 Mount the TV to the wall Caution: Avoid potential injuries or property damage! DO NOT over-tighten the lag bolts. Holding the TV with the top of the screen tilted toward the wall, slide the upper notches of the TV bracket 10° 5° (if necessary) over the upper flange of the wall plate. Then, gently lower the TV until the lock engages the Note:Any material covering the wall must not ex