Streszczenie treści zawartej na stronie nr. 1
™
™
Nexus
Phantom
Battery
Package
OWNER’S MANUAL
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS IMPORTANT READ AND UNDERSTAND THIS MANUAL BEFORE OPERATION…………………………………………………1 INTRODUCTION………………………………………………………...2 FEATURES……………………………………………………………....3 INSTALLATION OF NEXUS ™ PHANTOM MOUNT………………....4 ATTACHING NEXUS NP PHANTOM MOUNT…….………………...5 ATTACHING NEXUS V-MOUNT……………..…………………….....6 CHARGING NEXUS PHANTOM BATTERIES..……………………..7 NOMINAL CHARGE TIMES FOR NEXUS PHANTOM BATTERIES…………………………………………………………......8 PHANTOM BATTERY STATUS INDICATIONS……………………
Streszczenie treści zawartej na stronie nr. 3
IMPORTANT READ AND UNDERSTAND THIS MANUAL BEFORE OPERATION The Nexus phantom battery utilizing nickel cadmium battery chemistry delivers an uninterruptible power solution when used with the NEXUS series of batteries. The Nexus series of batteries will ONLY charge on one of the following chargers: • The NEXUS 2 All Chem Charger. • The NEXUS 4 All Chem Charger. THE NEXUS BATTERY CANNOT BE CHARGED ON any other Battery Charger. DO NOT attempt to charge on any charger that is not list
Streszczenie treści zawartej na stronie nr. 4
INTRODUCTION The Aspekt NEXUS phantom battery system from Anton/Bauer is a component in the next generation of the popular NP battery systems. The NEXUS battery, NEXUS Phantom battery, NEXUS mounting system, and NEXUS charging systems have been designed to upgrade the NP battery format into a battery format that is electrically and mechanically superior and in step with the advancements made to professional video cameras. The NEXUS phantom battery system will automatically ident
Streszczenie treści zawartej na stronie nr. 5
FEATURES 1. Phantom mount Status Indicator – The Phantom mount communicates with the attached NEXUS battery. The LED indicates the status of the Phantom battery. 2. Intelligent Un-interruptible Communication- The NEXUS Phantom Power system will provide seamless transitions from main power to back-up power. 3. Over-Current Surge protection- The NEXUS Phantom battery will assist in meeting power demands if a surge current is detected. The surge current can be detected from a high s
Streszczenie treści zawartej na stronie nr. 6
Installation of NEXUS Phantom housing The installation of te NEXUS Phantom housing will vary dependent upon the type of NEXUS mount used. Identify if you are using NEXUS NP or NEXUS V model. IDENTIFY THE SCREWS FOR YOUR MODEL. ONLY USE THE SUPPLIED SCREWS. TIGHTEN SCREWS UNTIL YOU FEEL RESISTANCE – DO NOT OVERTIGHTEN Attaching the NEXUS NP Phantom mount 4
Streszczenie treści zawartej na stronie nr. 7
The Phantom mount is attached between the camera and the NEXUS mount. Two separate types of screws are required for the NP mount. These are provided with the NEXUS battery package. 1) Attach the 2 pin wire connector from the phantom mount to the camera. 2) Attatch NEXUS base mount to camera with 4 screws (NP mount only). 3) Attach the 2 pin wire connector and the 1 wire communication connector from the NEXUS battery side of the mount to the corresponding connectors on the Phanto
Streszczenie treści zawartej na stronie nr. 8
The Phantom mount is attached between the NEXUS V-mount. The NEXUS V-mount is provided assembled from the factory. You must remove the screws in the NEXUS V-mount and re-assemble using the screws marked “V-mount version”. These are provided with the NEXUS Phantom battery package. 1) Remove the 6 screws in the NEXUS V-mount. 2) Separate the two portions of the V-mount. 3) Attach the 2 pin wire connector from the NEXUS V-mount to the 2 pin wire connector of the NEXUS Phantom Package
Streszczenie treści zawartej na stronie nr. 9
• DO NOT ATTEMPT TO CHARGE THIS BATTERY WITH ANY CHARGER OTHER THAN THE NEXUS ALL CHEM CHARGERS SPECIFIED IN THIS MANUAL. •Allow the battery to reach a steady green mode before using for the first time. Please read the individual charger Owner’s Manual to become acquainted with the many unique operating features of the NEXUS All Chem Chargers. • The NEXUS Phantom battery will have reached full charge when the LED’s on the charger indicate STEADY GREEN. •The NEXUS phantom batt
Streszczenie treści zawartej na stronie nr. 10
NOMINAL CHARGE TIMES FOR NEXUS 50 100% Steady Charge Level LED Indicators Green 25 minutes NEXUS 2, NEXUS 4 All Chem Chargers Charge time can vary depending on age, condition and remaining capacity of each battery at the time it is placed on the charger. Phantom Battery Status Indications • When the NEXUS phantom battery is being used, the LED indicators will display status as listed below. LEDS STATUS GREEN Above 15.6 VDC ORANGE Above 12.6 VDC FLASHING RED Below
Streszczenie treści zawartej na stronie nr. 11
OVERCURRENT INDICATION • If the NEXUS battery is subjected to a load that exceeds specifications, the protection electronics will operate to protect the lithium ion cells. The Phantom battery UPS system will work in conjunction with the NEXUS Battery to sense the overcurrent condition and automatically boost the battery voltage with the backup battery before the safety circuits open within the NEXUS battery. • The Phantom LED will flash between Red and Orange until the overcurr
Streszczenie treści zawartej na stronie nr. 12
STANDARD OPERATION • The Phantom mount communicates Reserve battery backup status to the attached NEXUS Battery. If the Phantom is utilizing the Reserve battery to power the camera and light, it will instruct the attached NEXUS battery to flash it’s number one ORANGE LED continuously. This gives the end user positive indication that the attached NEXUS battery can be replaced without camera or light output interruption. • Holding the attached NEXUS display button for 3 sec
Streszczenie treści zawartej na stronie nr. 13
PHANTOM BATTERY OVERSURGE PROTECTION GUIDELINES • If a NEXUS battery is attached without first installing a Phantom battery, camera power will be supplied by the attached NEXUS battery. NOTE-Attaching a NEXUS Battery without a Phantom battery will disable the light output. This will prevent power surge from the light output which would trigger the NEXUS protection circuit. • If the NEXUS protection circuit is triggered by a power surge, the NEXUS battery will need to be remov
Streszczenie treści zawartej na stronie nr. 14
OPERATING GUIDELINES 1. Keep batteries cool or at room temperatures whenever possible. Sustained elevated temperatures contribute to the premature failure of batteries: a. Charging - Charge batteries at room temperature. In warm climates keep chargers in air conditioned rooms for best performance. b. On assignment - Do not leave batteries in a hot vehicle trunk or out in direct sunlight. 2. Do not over-discharge batteries - It is quite proper to discharge a battery until a lo
Streszczenie treści zawartej na stronie nr. 15
SERVICE In the event a NEXUS Phantom battery fails to deliver acceptable performance, it must be returned to the Anton/Bauer. No other facility is qualified and equipped to service the NEXUS batteries and calibrate the electronic components and sensors. Any attempt by the user or any other unauthorized persons to service this battery will surely result in improper calibration of the electronic components resulting in severe battery damage and/or safety hazards, including potential pers
Streszczenie treści zawartej na stronie nr. 16
PRECAUTIONS 1. Do not expose this battery to high temperatures (above 50°C/120°F). This includes storage in direct sunlight , in cars in hot weather, or in close proximity to heating devices. This may cause electrolyte leakage, impaired performance and shortening of battery service life. 2. Redundant protection devices are designed to operate if the battery voltage is abnormally high or low and if the temperature of the battery exceeds operating specifications. These electroni
Streszczenie treści zawartej na stronie nr. 17
NEXUS PHANTOM BATTERY SPECIFICATIONS 13.2 V Nominal OUTPUT VOLTAGE 12.0 ~ 16.5v Operating CAPACITY 8 WH Nominal (CELL CAPACITY) (600 mAH Rated) 1 RECOMMENDED OPERATION 15 - 40 watts 2 (MAXIMUM DISCHARGE RATE) (54 watts) .55lb WEIGHT .25kg 1.25” x 3.0” x 4.5” SIZE 3.175cm x 7.62cm x 11.43cm CHARGE TEMPERATURE 0 – 40°C DISCHARGE TEMPERATURE -20 – 60°C STORAGE TEMPERATURE -20 – 50°C 1 NEXUS Battery may be used to power both camera and on camera light however its maximum
Streszczenie treści zawartej na stronie nr. 18
LIMITED WARRANTY This one (1) year limited warranty for the product specified in this document is given by Anton/Bauer, Inc. (“Anton/Bauer”), 14 Progress Drive, Shelton, Connecticut 06484. If you have any questions regarding product applications, product specification, or to obtain warranty service on this or any Anton/Bauer product, contact the Anton/Bauer Customer Support Group or the company at the address above. IMPORTANT: WARRANTY REGISTRATION CARD MUST BE MAILED WITHIN 30 DAYS O
Streszczenie treści zawartej na stronie nr. 19
ANY OTHER PRODUCT OR DEVICE. Misuse includes any use of the Product in other than its intended application, including the use of this Product with any charging device or accessory not manufactured by and/or specified by Anton/Bauer. This warranty does not cover, and Anton/Bauer assumes no responsibility for, any equipment or devices used in conjunction with the Product. ANTON/BAUER DISCLAIMS ANY LIABILITY FOR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY WRITTEN OR IMPLIED WARRANTY OF THE
Streszczenie treści zawartej na stronie nr. 20
The following are trademarks of Anton/Bauer, Inc.: ACS, ADM, Anton/Bauer, Anton/Bauer logo and parallelogram design, Aspekt, Automatique, ComPac, DataLink, DataTap, Dionic, Gold Mount, HyTRON, Impac, InterActive, InterActive 2000 logo, LifeSaver, Logic Series, Logic Series Logo, Maxx man logo design, MircoCode, Nexus, PowerCharger, PowerStrap, Powertap, Probe, Proformer, ProPac, RealTime, SSP, Satellight, Snap-On, Snap-On 2, Stasis, Titan, Triconn, TrimPac, Ultrakit, Ultralight, “T
